Standard
WIRE - STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 °F
1998-11-01
HISTORICAL
AMS9226
Search Results
Standard
WELDING ELECTRODES, COVERED, STEEL 5Cr - 0.55Mo
1975-06-15
HISTORICAL
AMS6467B
This specification covers a low-alloy steel in the form of covered welding electrodes.
Standard
WELDING ELECTRODES, COATED, STEEL, CORROSION RESISTANT 12.5Cr
1974-12-01
HISTORICAL
AMS5777A
This specification covers a corrosion-resistant steel wire in the form of coated welding electrodes.
Standard
WELDING ELECTRODES, COATED, STEEL 5Cr - 0.55Mo
1968-11-01
HISTORICAL
AMS6467A
Standard
WELDING ELECTRODES, COATED, STEEL 5Cr - 0.55Mo
1959-01-15
HISTORICAL
AMS6467
Standard
WELDING ELECTRODES, COATED STEEL, CORROSION RESISTANT 16.9Cr - 4.8Ni - 0.2(Cb + Ta) - 3.5Cu
1962-01-01
HISTORICAL
AMS5827
Standard
WELDING ELECTRODES, COATED STEEL, CORROSION RESISTANT 16.4Cr - 4.8Ni - 0.22 (Cb + Ta) - 3.6Cu
1967-04-01
HISTORICAL
AMS5827A
Standard
Tungsten Carbide-Cobalt Chrome Powder Agglomerated and Sintered
2020-04-21
HISTORICAL
AMS7882C
This specification covers tungsten carbide-cobalt chrome in the form of powder.
Standard
Tungsten Carbide-Cobalt Chrome Powder Agglomerated and Sintered
2021-10-01
CURRENT
AMS7882D
This specification covers tungsten carbide-cobalt chrome in the form of powder.
Standard
Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded
2002-09-04
HISTORICAL
AMST8506A
This specification covers seamless and welded tubing of corrosion-resistant steel in the annealed condition.
Standard
Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded
1999-01-01
HISTORICAL
AMST8506
This specification covers seamless and welded tubing of corrosion-resistant steel in the annealed condition.
Standard
Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded
2007-08-24
CURRENT
AMST8506B
This specification covers seamless and welded tubing of corrosion-resistant steel in the annealed condition.
Standard
Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition
1999-01-01
HISTORICAL
AMST6845
This specification presents requirements for thin-walled (inside diameter greater than four times the wall thickness and outside diameter 1/4 inch and larger) corrosion-resistant steel tubing in approximately the 1/8 hard condition, of special quality, suitable for use in high-pressure hydraulic systems.
Standard
Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition
2013-07-31
CURRENT
AMST6845B
This specification presents requirements for thin-walled (inside diameter greater than four times the wall thickness and outside diameter 1/4 inch and larger) corrosion-resistant steel tubing in approximately the 1/8 hard condition, of special quality, suitable for use in high-pressure hydraulic systems.
Standard
Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition
2007-12-17
HISTORICAL
AMST6845A
This specification presents requirements for thin-walled (inside diameter greater than four times the wall thickness and outside diameter 1/4 inch and larger) corrosion-resistant steel tubing in approximately the 1/8 hard condition, of special quality, suitable for use in high-pressure hydraulic systems.
Standard
Trace Element Control Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, High-Stressed Applications
2007-04-24
HISTORICAL
AMS2281A
This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products.
Standard
Trace Element Control Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, High-Stressed Applications
2013-01-17
CURRENT
AMS2281B
This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products.
Standard
Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
2024-02-13
WIP
AMS2261M
This specification covers established manufacturing tolerances applicable to bars, rods, and wire of nickel, nickel alloy, and cobalt alloys ordered to inch-pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.
Standard
Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
2007-09-13
CURRENT
MAM2242D
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of corrosion and heat resistant steels, iron alloys, titanium, and titanium alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of the specified range.
Standard
Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
2007-07-19
CURRENT
MAM2241E
This specification covers established metric manufacturing tolerances applicable to corrosion and heat resistant steel, iron alloy, titanium, and titanium alloy bars and wire ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of the specified range.
