Search Results

Precipitation Hardened Stainless Steel (PHSS) is one of the martensitic steels that possess exceptional strength and corrosion resistance. Because of its characteristics, this PHSS is exclusively adopted in numerous engineering uses such as nuclear, chemical and marine industries. Welding is one of the important methods of joining that helps to make weldments with better performance characteristics. Corrosion behaviour is one of the important characteristics that contribute hugely to marine and other corrosion-related environments and also this is the most common problem for most of the manufacturing industries. The goal of this study was to analyze the PHSS weldments’ corrosive behavior and compare it with that of the two commonly used welding processes, namely MIG and TIG. The corrosive properties of the weldments were evaluated using various mediums, such as nitric acid, ferric chloride, and Oxalic acid.

The engine parameters of a diesel engine (using coated and uncoated pistons) operating with alumina additive chlorella vulgaris biodiesel blends were evaluated experimentally. The properties of test fuel samples were investigated using ASTM standards, and the composition of C. Vulgaris biodiesel was also examined using an FTIR report. A diesel engine’s performance and pollution characteristics were studied using different fuel samples such as diesel, CBD20, CBD20ANP with coated and uncoated pistons. The experimental results showed that the coated engine had a higher BTE (1.8-3.2 percent) and a lower BSFC (1.2-3.8 percent) than the uncoated engine. It is also identified that, exhaust emissions like as CO, HC, and smoke opacity have also been moderately reduced with the coated engine, while NOx emissions were slightly increased.

Composites made of aluminium and other materials are now essential materials for a variety of engineering tasks, including those in the automotive industry. The present work reports on the machinability studies of Al 6061 hybrid metal matrix composites (HMMC). For the investigation, Al6061 alloy is reinforced with Boron carbide and Graphene nanoparticles (GNp) and the hybrid composite was prepared by stir casting under suitable conditions. The Electrical discharge machining (EDM), advanced machining process, was chosen to machine HMMC as it is difficult to machine by conventional machining. EDM machinablity studies were done on stir casted Al-B4C-GNP composites. The optimization of EDM process parameters were carried out using L27 orthogonal approach with input parameters such as pulse on time, pulse off time and peak current for the response of material removal rate (MRR) and surface roughness.

Due to their various features, aluminum alloy can be used in various applications. These include aerospace, automotive, and electrical and thermal applications. Compared to structural steels, aluminum offers superior corrosion resistance and specific strength. Aluminum alloy known as AA 2014 exhibits various mechanical properties. These include its improved strength and weight ratio. It can also be used in military and aircraft applications. Aluminum alloy is commonly used in various engineering applications, such as the manufacturing of structures and aircraft components. Due to its corrosion resistance, it can be utilized in severe environmental environments. Different methods are used in unconventional ways to generate complicated forms of electrical components. One of these is wire electro-discharge machine (WEDM). This process involves making intricate shapes out of conductive materials.

SS304 is a type of stainless steel that is well-known for its high ductility and resistance to corrosion; as a result, it is typically utilized in a variety of applications, such as the exhaust systems of automobiles and the springs that are used in seatbelts. Because of its qualities, it will eventually be employed in a variety of body parts, including fuel tanks and chassis, among other things. Due to its properties, SS304 is known to be incredibly difficult to machine using conventional methods. Through a wire electrical discharge machining process, it is easier to cut complex materials with high surface finishes. In this study, a study was conducted on the WEDM process parameters of SS304 to optimize its machining process. The study was carried out using the DoE approach, which involved planning the various experiments. The parameters of the process, such as the pulse on time, peak current, and off time, were analyzed to determine their performance.

Considering the advancements in manufacturing industries, which are crucial for economic growth, there is a substantial demand for exploration and analysis of advanced materials, especially alloy materials, to enable efficient utilization of new technologies. Lightweight and high-strength materials, like aluminium alloys, are highly recommended for various applications that necessitate both strength and resistance to corrosion, such as automobile, marine and high-temperature applications. Therefore, there is a significant need to investigate and analyse these materials to facilitate their effective application in manufacturing sectors. This study investigates the machinability of drilling AA6061 using a micro-textured tool and proposes an Adaptive Neuro Fuzzy Inference System (ANFIS) model for investigating the machinability of drilling AA6061 aluminium alloy with a micro-textured uncoated tool.

Scrap collection from any location is handled with mortal interference in several places and companies which may be extremely harmful or even dangerous to humanity. The demand for robotization has risen rapidly in recent years, owing to cutting-edge technologies that minimize manpower and threat-taking training directly or indirectly. The main objective of the paper is to study, analyze, investigate the main contribution of waste collecting by workers while cleaning in the Mechanical Industry. In order to ensure the safety of the workers during cleaning we had implemented the Automatic Trash Collecting Machine in the industry. For Fabricating the Trash collecting Machine first we had analyzed the problem in the industry and then we had started the free hand sketch of Trash Collecting Machine. Then the design work of Automatic Trash Collecting Machine is done in the modeling software Catia V5. Then the material selection for our model has been done.

Laser Beam Welding (LBW) is one of the advanced methods of joining metals by fusion. The LBW process exhibits comparatively better welding performance than conventional processes and this method of welding approach is exclusively employed in higher volume applications such as automotive industries. One of the most common nickel alloys used in various engineering fields is Inconel 718. This material has high strength and corrosion resistance properties, and is commonly used in high-temperature applications, such as gas turbines and rocket engines. In this study, we aim to develop an artificial intelligence tool that can analyze the influence of various process variables on the design and performance of a metal. The experiments were planned using the design approach of Taguchi. An L27 orthogonal array was used for the experiments. The three performance measures are the top width, bottom width, and penetration.

A wide range of engineering domains, such as aeronautical, automobiles, and marine, rely on the use of Metal Matrix Composites (MMC). Due to the excellent properties, such as hardness and strength, Aluminum base MMC are generally adopted in various uses. Due to the increasing number of reinforcement materials being added to the MMC, its properties are expected to improve. In this exploratory analysis, an effort was given to develop a new aluminium-based MMC. The analysis of the machinability of the composite was also performed. The process of creating a new MMC using a stir casting technique was carried out. It resulted in a better and more reinforced composite than its base materials. The reinforcement materials were fabricated using different weight combinations and process parameters, such as the temperature and duration required to stir. Due to the improved properties of the composite, the traditional machining method is not feasible for machining of these materials.

Magnesium alloy, known for its high strength and lightweight properties, finds widespread utilization in various technical applications. Aerospace applications, such as fuselages and steering columns, are well-suited for their utilization. These materials are frequently employed in automotive components, such as steering wheels and fuel tank lids, due to their notable corrosion resistance. The performance of magnesium alloy components remains unimproved by normal manufacturing methods due to the inherent characteristics of the material. This work introduces a contemporary approach to fabricating complex geometries through the utilization of Wire-Electro Discharge Machining (WEDM). The material utilized in this study was magnesium alloy. The investigation also considered the input parameters associated with the Wire Electrical Discharge Machining (WEDM) process, specifically the pulse duration and peak current.

Modern automobile applications such as petrol, diesel, and gaseous fuel injection system use dissimilar Inconel 718 (IN718) and Stainless Steel 304 (SS 304) joints. IN 718 is a precipitation-hardened austenitic nickel-based superalloy with exceptional qualities such as high strength, resistance to corrosion, greater toughness, as well as resistance to thermal induced fatigue at elevated temperatures (between 150 and 1500oC), while SS 304 is a T 300 Series austenitic stainless steel alloy that can be used successfully in wide range of applications due to greater resistance to corrosion, good high and low temperature strength and ductility with excellent weld ability and formability. To get a better understanding of the mechanical characteristics of these heterogeneous weldments, these alloy joints were created using laser beam welding, one of the most modern joining techniques for high-strength materials.

In today's world, there is an increasing emphasis on the responsible use of fiber reinforced materials in the automobile applications, construction of buildings, machinery, and appliances as these materials are effectively reused, recycled, or disposed with minimum impact on the environment. As such, it has become mandatory to incorporate sustainable, environmental friendly and green concepts in the development of new materials and processes. The primary objective of this study is to manufacture composites using fibers obtained from Thespesia Lampas plants, which are known for their soft, long fibers that are commonly used in various domestic products. The composites are made by combining these fibers with a general purpose polyisocyanurate resin, and their potential applications in both domestic and commercial products are explored. To evaluate the properties of these composites, tests are conducted for tensile strength, flexure, and water absorption.

The alloy investigated in this research is Precipitation Hardened Stainless Steel (PHSS) 15-5, which provides good corrosion, high strength and hardness. 15-5 Stainless Steel is extensively employed in a variety of applications, including aero plane components, high-pressure corrosive environments that include valves, fasteners, shafts, fittings and gears. In this current exploration, an analysis of the machinability of PHSS is analyzed with textured inserts and the outcomes as compared to conventional inserts. To increase the machinability conditions, two distinct types of textures were produced on the rake face of the tool inserts and employed for this machining procedure utilizing a Wire Electric Discharge Machine (WEDM).The dimensions of the textures were cut on the trial-and-error method. Three different machining parameters with three different levels were chosen. Cutting Speed, feed rate and depth of cut were chosen as the input parameters.

Titanium alloys are deemed as one amongst the light weight material most preferably adopted in numerous engineering applications due to its exceptional features such as corrosive resistance and thermal strength. These alloys are predominantly used in components of IC engines such as valves and springs, connecting rods. Especially Ti-Grade 5 adopted in aircraft, automobile parts ski plates and bicycles. The preliminary goal of this present research is to optimize the machining variables for Wire Electrical Discharge Machining (WEDM) of Ti-6Al-4V (Grade 5) to accomplish improved rate of material removal and surface finish. Taguchi’s design and analysis method was chosen for devising and examining the experiments by considering input factors (pulse duration and current). An L9 OA was utilized for experimentation to analyze the various output variables, such as surface finish and material removal rate, using the response analysis of Taguchi.

Wire Electrical Discharge Machining (WEDM) is a variant of the electrical discharge machining (EDM) process, which represents an innovative method for the removal of material from a workpiece. The aforementioned process is frequently employed for the machining of harder materials that possess intricate geometries. Titanium alloys are a class of lightweight materials that find extensive utilization in many technical applications. Titanium Grade-5 is a titanium-based alloy that exhibits enhanced mechanical strength and improved resistance to corrosion. The objective of this exploratory analysis is to establish empirical correlations between the selected input variables, namely ‘Pulse on,’ ‘Pulse off,’ and peak current, and the desired output measures, which are material removal rate and surface roughness. The experimental design employed the Taguchi method to effectively organize the combination of tests by considering input factors.

To enhance the microstructural and mechanical properties of Reduced Activation and Ferritic-Martensitic (RAFM) steel thermo mechanical treatment (TMT) was performed on as received Normalised and Tempered steel (N+T). The RAFM with 9Cr-1W-0.06Ta major alloying elements steel was used in the study in N+T and TMT conditions. The refinement in microstructure and precipitates was observed in TMT steel in comparison to N+T steel. There is a drastic improvement in mechanical properties such as hardness, tensile properties are observed without losing the ductility. The creep deformation behaviour of thermo-mechanical treated steel and N+T steel were studied at different stress levels at 823 K. The comparative creep rupture and strain properties were studied, and various creep deformation regimes were also analysed for both the conditions of steel.

In this investigation, friction stir welding (FSW) was employed for joining HSLA steel plates (5 mm thick) of grade DMR249A in the development of light weight ship structures. This investigation aims to study the effect pre-heating temperature (PHT) on microstructure and mechanical properties of FSWed DMR249A steel-joints. The PHT of W99 tool was varied from 100 to 250°C. The optical microscopy (OM), scanning electron microscopy (SEM), and an elemental analysis of stir zone (SZ) of DMR249A steel-joint was carried out. The tensile properties, hardness and impact toughness of DMR249A steel-joints were evaluated and compared to BM and joints without PHT. Results disclosed that the DMR249A steel-joints made at PHT 100°C exhibited superior tensile properties and impact toughness compared to other joints. It is attributed to the evolution of finer acicular ferritic and upper bainitic microstructure with no debris of tool in SZ.

Biodiesel, which is made from the methyl ester of vegetable oils, is becoming more and more popular as an alternative fuel for compression ignition engines because it is good for the environment and can be used as a replacement fuel without making major changes to the engine. Biodiesel offers several key advantages, including its ready availability, environment friendly and its ability to contribute to lower carbondioxide levels in the atmosphere. An exhaust gas recirculation (EGR)-equipped Kirloskar compression ignition engine is used in this research to examine the influence of micro-explosions on the reduction of nitrogen oxides and smoke. The fuel chosen is Karanji oil methyl ester. The experiment involved varying the exhaust gas quantity in increments of 5%, ranging from 5% to 15%, as exhaust gas recirculation (EGR) is recognized as an effective technique for reducing NOx emissions. Similarly, the study also adjusted the water content, ranging from 5% to 15% in 5% increments.

The current study has concentrated on discovering and developing clean alternative energy sources like biodiesel and employing novel methods to reduce harmful emissions and enhance engine performance behavior. The consumption of biodiesel in diesel engines reduces the emissions from the tailpipe, but some researchers claim that it actually produces more NOx pollution than engines that run on regular diesel, which limits the use of biodiesel. In this study, Ricinus communis biodiesel was generated through transesterification process, and its fuel properties were assessed. The employ of biodiesel in diesel engines minimize exhaust emissions; however, multiple investigators claim that the consumption of biodiesel generates greater amounts of nitrogen oxide pollutants than diesel-fueled engines, which limits the possibility of biodiesel usage.

The current research was aimed at determining the most effective way to use alternative renewable feedstock to power a diesel engine. Mimusops elengi, a new and novel biofuel was recognized for this current study, which is widely available in the south of India. The investigation was conducted on B20 volume basis (20% Mimusops elengi methyl ester blended with 80% diesel). Furthermore, it was recognized that when the performance characteristics were traded off, the emission magnitude has slightly higher. To address the diesel engine pollution, an oxygenated nano additive like titanium oxide was dissipated only with the fuel blend at distinct mass fractions of 25 parts per million (ppm) with differing injection pressures of 180 bar, 200 bar, 220 bar, and 240 bar. The tests were created using a statistical programme known as design of experiments, which is purely based on Taguchi and response surface methodology.