Search Results

Urea-selective catalytic reduction (SCR) catalysts are the leading aftertreatment technology for diesel engines, but there are major challenges associated with meeting future NOx emission standards, especially under transient drive cycle conditions that include large swings in exhaust temperatures. Here we present a simplified, transient, one-dimensional integral model of NOx reduction by NH₃ on a commercial small-pore Cu-zeolite urea-SCR catalyst for which detailed kinetic parameters have not been published. The model was developed and validated using data acquired from bench reactor experiments on a monolith core, following a transient SCR reactor protocol. The protocol incorporates NH₃ storage, NH₃ oxidation, NO oxidation and three global SCR reactions under isothermal conditions, at three space velocities and at three NH₃/NOx ratios.

A discussion of aluminum bumper systems, alloy data fabrication performance, and costs are presented. Weights and costs of similar steel, aluminum, and urethane face systems are compared and the effect of weight savings on costs and fuel economy is determined. Areas for product improvements are explored.

A discussion of the impact of a 2.5 mph bumper standard on aluminum sheet and extruded bumpers is presented. Information is presented on energy management systems, bumper shape, and dentability. This information can be used to determine whether a sheet or extruded bumper is the most efficient for a particular application.

The effects of geometric parameters of open-cell aluminum foams on the performance of aluminum foam-phase change material (PCM) composites as heat sinks are investigated by experiments. Three types of open-cell aluminum 6061 foams with similar relative densities and different cell sizes are used. Paraffin is selected as the PCM due to its excellent thermal stability and ease of handling. The experimental results show that the performance of the heat sink is significantly affected by the surface area density of the aluminum foam. In general, as the surface area density of the foam increases, the performance of the heat sink is improved regardless of the current phase of the PCM.

Aluminum castings have much to offer the automotive industry in terms of weight reduction and energy savings. Their long-term acceptability can only be assured, however, by applying the most cost-effective combinations of material and processing. This paper will point out some “cost-saving” opportunities in two basic areas: (1) The use of hypereutectic aluminum-silicon alloys to eliminate a need for ferrous wear-surface inserts, to reduce machining capital expenditures and to reduce overall part weight; and (2) The use of two processing methods, “Pore-Free” die casting and “low-pressure” casting, to produce aluminum parts with minimum metal usage and energy consumption.

High integrity aluminum castings are potential replacements for cast iron in current vehicle weight reduction programs. Domestically, several cast aluminum structural-type components are already realities, saving weight and contributing to improved fuel economy; wheels, brake drums, master brake cylinders and power steering housings. In Europe, suspension components, wheel hubs and disc brake calipers are cast in aluminum for some car models, indicating the functional and economic feasibility of such parts. Alloy and process technology already exist to enable production of realiable, high strength aluminum castings. Domestic automotive product engineers are urged to carefully consider and thoroughly test such aluminum castings along with the many other weight reduction possibilities currently being investigated.

The use of aluminum in automotive applications is growing. The 1991 calendar year automobiles used over 190 pounds per vehicle. The growth for aluminum applications is expected to be significant over the next ten years. Expected changes in end use and alloy mix pose challenges to the recycling system. These challenges need consideration by both the automotive and aluminum industries. This paper discusses these challenges and presents detailed analysis of the weight and chemistry aspects of automotive aluminum recycling. It also demonstrates a feasible and efficient recycling system in which post-consumer scrap is consumed in new production.

In this paper, various micromechanics models based on actual microstructures of DP steels are examined in order to determine the reasonable range of martensite volume fraction where the methodology described in this study can be applied. For this purpose, various micromechanics-based finite element models are first created based on the actual microstructures of DP steels with different martensite volume fractions. These models are, then, used to investigate the influence of ductility of the constituent ferrite and martensite phases and also the influence of voids in the ferrite phase on the overall ductility of DP steels.

For multiphase advanced high strength steels (AHSS), the constituent phase properties play a crucial role in determining the overall mechanical behaviors. Therefore, it is important to accurately measure/estimate the constituent phase properties in the research of AHSS. In this study, a new nanoindentation-based inverse method that we developed was adopted in estimating the phase properties of a low alloy Quenching and Partitioning (Q&P) steel. A microstructure-based Finite Element (FE) model was also generated based on the Electron BackScatter Diffraction (EBSD) and Scanning Electron Microscopy (SEM) images of the Q&P steel. The phase properties estimated from nanoindentation were first compared with those estimated from in-situ High Energy X-Ray Diffraction (HEXRD) test and, then, employed in the generated FE model to examine whether they can be appropriately used as the input properties for the model.

Brønsted acidity of solution ion-exchanged and solid-state exchanged zeolites was compared for NaY, BaY, CaY, NaX, and CaX zeolites. These materials were chosen because they all exhibit catalytic activity in SCR of NOx in combination with a non-thermal plasma. Brønsted acidity was characterized qualitatively with retinol as an indicator dye. Our results show that the solid-state exchange using a chloride salt creates zeolites with lower acidity than zeolites obtained by conventional solution ion-exchange. NO2 adsorption was also found to create a significant quantity of acid sites at room temperature and a slight increase in acidity at 200°C. We speculate that the acid sites created by NO2 adsorption, because of their vicinity to metal cation sites in the zeolite, may lead to preferential reactions that lead to NOx reduction. BaY made by solution ion-exchange and BaY made by solid-state exchange using a chloride salt were tested for NOx reduction in a plasma-catalyst reactor system.

Recently, several studies conducted by automotive industry revealed the tremendous advantages of Advanced High Strength Steels (AHSS). TRansformation Induced Plasticity (TRIP) steel is one of the typical representative of AHSS. This kind of materials exhibits high strength as well as high formability. Analyzing the crack behaviour in TRIP steels is a challenging task due to the microstructure level inhomogeneities between the different phases (ferrite, bainite, austenite, martensite) that constitute these materials. This paper aims at investigating the fracture resistance of TRIP steels. For this purpose, a micromechanical finite element model is developed based on the actual microstructure of a TRIP 800 steel. Uniaxial tensile tests on TRIP 800 sheet notched specimens were also conducted and tensile properties and R-curves (Resistance curves) were determined.

The strain-induced diffusionless shear transformation of retained austenite to martensite during straining of transformation induced plasticity (TRIP) assisted steels increases strain hardening and delays necking and fracture leading to exceptional ductility and strength, which are attractive for automotive applications. A novel technique that provides the retained austenite volume fraction variation with strain with improved precision is presented. Digital images of the gauge section of tensile specimens were first recorded up to selected plastic strains with a stereo digital image correlation (DIC) system. The austenite volume fraction was measured by synchrotron X-ray diffraction from small squares cut from the gage section. Strain fields in the squares were then computed by localizing the strain measurement to the corresponding region of a given square during DIC post-processing of the images recorded during tensile testing.

A comparison of welding techniques was performed to determine the most effective method for producing aluminum tailor-welded blanks for high volume automotive applications. Aluminum sheet was joined with an emphasis on post weld formability, surface quality and weld speed. Comparative results from several laser based welding techniques along with friction stir welding are presented. The results of this study demonstrate a quantitative comparison of weld methodologies in preparing tailor-welded aluminum stampings for high volume production in the automotive industry. Evaluation of nearly a dozen welding variations ultimately led to down selecting a single process based on post-weld quality and performance.

This paper compares the construction of an aluminum body with an identical steel body. The design parameters set forth for the steel body governed the overall approach resulting in a realistic comparison between aluminum and steel weight of a body-in-white. The paper discusses specific techniques used in the construction of the aluminum body and outlines areas of difference between aluminum and steel of interest to automotive engineers.

As the use of adhesive bonding increases in structural automotive applications, concerns specific to this bonding method need to be addressed. One such concern is the potential of the bulk adhesive to creep under load at elevated temperature. This paper describes a technique whereby long term performance (> 10 year) can be predicted using data developed within weeks using a solids analyzer and time-temperature superpositioning techniques. Three epoxy adhesives are evaluated for creep performance at 93.3°C (200°F) and 2.07mpa (300 psi). With the same data, other stresses and temperatures could be calculated. The technique developed demonstrates excellent differentiation among the materials.

Dynamic denting tests have been conducted on actual autobody components and on simulated panels fabricated from aluminum and steel sheet at impact velocities of 20 to 125 mph. These experiments give additional evidence that dent depth is a linear function of impact velocity. They also show that autobody components fabricated from aluminum sheet can have equal or improved dent resistance compared to the same components fabricated from the steel alloys currently used. Primary factors to be considered in comparing dynamic dent resistance are sheet thickness, yield strength, modulus of elasticity, density and geometric shape.

This paper presents two methods of characterizing and describing the formability of tailor welded blanks (TWB). The first method involves using miniature tensile specimens, extracted from TWB weld material, to quantify mechanical properties and material imperfection within TWB welds. This technique combines statistical methods of describing material imperfection together with conventional M-K method modeling techniques to determine safe forming limit diagrams for weld material. The second method involves the use of an extended M-K method modeling technique, which places multiple material thickness and material imperfections inside one overall model of TWB performance. These methods of describing TWB formability and their application to specific aluminum TWB populations are described.

A double dielectric barrier discharge reactor driven by an alternating voltage is a relatively simple approach to promote oxidation of NO to NO2 for subsequent reduction in a catalyst bed. The chemical performance of such a non-thermal plasma reactor is determined by its current and electric field behavior in the gap, and by the fraction of the current carried by electrons, because the key reactants which initiate the NO oxidation and accompanying chemical changes are produced there, mostly by electron impact. We have tried to determine by models and experiments the bounds on performance of double dielectric barrier reactors and guidelines for optimization. Models reported here predict chemical results from time-resolved applied voltage and series sense capacitor data.

Recent work has shown that energy efficiencies as well as yields and selectivities of the NOx reduction reaction can be enhanced by combining a plasma discharge with select catalysts. While analysis of gas phase species with a chemiluminescent NOx meter and mass spectrometer show that significant removal of NOx is achieved, high background concentrations of nitrogen preclude the measurement of nitrogen produced from NOx reduction. Results presented in this paper show that N2 from NOx reduction can be measured if background N2 is replaced with helium. Nitrogen production results are presented for a catalyst system where the catalyst is in the plasma region and where the catalyst is downstream from the plasma. The amount of N2 produced is compared with the amount of NOx removed as measured by the chemiluminescent NOx meter. The measured nitrogen from NOx reduction accounts for at least 40% of the total NOx removed for both reactor configurations.

Diesel particulate samples were collected from a light duty engine operated at a single speed-load point with a range of biodiesel and conventional fuel blends. The oxidation reactivity of the samples was characterized in a laboratory reactor, and BET surface area measurements were made at several points during oxidation of the fixed carbon component of both types of particulate. The fixed carbon component of biodiesel particulate has a significantly higher surface area for the initial stages of oxidation, but the surface areas for the two particulates become similar as fixed carbon oxidation proceeds beyond 40%. When fixed carbon oxidation rates are normalized to total surface area, it is possible to describe the oxidation rates of the fixed carbon portion of both types of particulates with a single set of Arrhenius parameters. The measured surface area evolution during particle oxidation was found to be inconsistent with shrinking sphere oxidation.