Search Results

There is concern over water-in-oil emulsion formation in passenger cars in the field. Crankcase pressure measurements in the ASTM Sequence IID rust test have been used to indicate possible emulsion formation tendencies of lubricants. This paper presents the development of a short duration emulsion fleet test procedure which demonstrates low car-to- car variability and correlates well with a previous fourmonth winter emulsion fleet test. Physical emulsion characteristics and used oil analyses are described. Evaluation of both Sequence IID reference oils and commercial oils in this field test reveals a lack of correlation between Sequence IID crankcase pressure results and field performance. The new procedure has been applied to investigate the impact of additive and base oil variations on the emulsion-forming tendencies of lubricants in the field. Base oil variables such as viscosity grade, composition, and volatility were evaluated.

Two prominent trends are facing diesel engine builders and their customers, environmental regulations and cost containment. Increasingly stringent exhaust emissions regulations have necessitated major changes in diesel engine design. Combustion temperatures and fuel injection pressures continue to rise. This and other factors, such as lower oil consumption for exhaust particulate reduction, place greater demands on crankcase lubricating oils. Another prominent environmentally related cost factor facing fleet operators is that of waste oil management. The inventory and disposal of used lubricants must now be handled in accordance with regulated guidelines and their associated costs. To compensate, new lubricant categories have been designed in both North America and Europe, such that 1994 and later emission controlled engines will perform as reliably as their earlier counterparts.

This paper describes the development of a image analysis system that can be used to rate injectors from the Cummins L10 Injector Depositing Test. In the procedure, injectors are mounted on a computer controlled turntable and scanned using a CCD camera focused on the labyrinth flow area of the injector. The scanned monochrome images are processed and assigned an average gray scale rating. Results from the image analysis system are compared to the modified CRC Piston and Ring Rating method currently used within the Cummins test procedure. To do this, a series of injectors that have been rated by trained raters at a recent workshop were also rated via the image analysis system. The image analysis system ratings demonstrated a strong correlation (R = 0.85) to the CRC ratings. Using these same injectors, the image analysis method shows improvements in repeatability and reproducibility of approximately 50% over the current procedure.

A test method has been developed which provides for the rapid measurement of the scuffing performance of diesel fuel using the Ball-On-Cylinder Lubricity Evaluator (BOCLE). A test can be completed in less than one hour. Data has been generated indicating that the method achieves good discrimination between fuels of varying lubricity and correlates well with fuel performance as measured in pump tests.

A test was developed by the Cummins Engine Company to evaluate Diesel fuel quality and potential additive effects. This test utilizes a Cummins L10 Diesel engine with a PT fuel system and stepped plunger injectors. A modified CRC rating system is used to quantify deposit levels. This paper further investigates the L10 Injector Depositing Test and will focus on Diesel fuel and additive variables. In the original work, the bulk of the data was collected on an industry standard reference fuel, Cat 1-H, as opposed to commercially available Diesel fuels. Commercially available Diesel fuel varies in composition with regard to sulfur level, percent aromatics, final distillation end point, and cetane number. To evaluate these fuel properties and their possible effects on injector deposit formation, two test matrices were designed. The first experiment is a 12-run fractional factorial design with four factors: additive level, sulfur, aromatics, and 90 percent distillation point (T90).

Accurate, timely field test results are necessary to develop and validate lubricants meeting frequently changing performance requirements. Field tests can also provide valuable information about performance deficiencies (e.g., soot related wear) which are not apparent in laboratory development tests. Since field tests are time intensive and increasingly expensive, it is imperative that the data generated provide meaningful results with reasonable expenditures. The data generation and analysis process are being constantly improved according to the principles of quality management. Part of the process improvement focuses on accurate, realistic treatment of the data since more variation is typically observed in field tests than in laboratory tests. One of the most difficult analytical processes occurs with oil consumption data.

Recent commercial specification revisions for automatic transmission fluids (ATFs) have focused upon more stringent friction requirements. More stringent friction durability characteristics are assessed using the SAE No. 2 tester. The commercial specifications do not include provisions to evaluate low speed friction characteristics, which have been shown to relate to torque converter shudder. This paper focuses upon effective use of the Falex 6 Multispecimen Tester to evaluate friction durability and to evaluate low speed friction characteristics in conjunction with low speed friction apparatus (LVFA) testing. Falex 6 testing agreed with torque fade observed in SAE No. 2 tests. Low speed stick-slip durability characteristics were effectively differentiated for a number of field ATFs. Falex 6 testing coupled with LVFA testing was shown to correlate with field experience and other test methods related to torque converter shudder.

Interactions between automatic transmission fluid (ATF) components and composite friction materials and their effect on friction system performance continues to be an active area of interest to the automotive industry. A more fundamental understanding is needed of how base fluids, ATF additives, friction materials, and transmission design interact to produce the observed transmission system performance and durability. We herein report results from investigations carried out using a relatively thermo-oxidatively stable polyalphaolefin (PAO) base fluid treated with components representative of several additive types we previously reported to have significant negative effects on frictional performance. Secondly, we investigated a conventionally refined 150 N base oil treated with a calcium sulfonate detergent previously shown to improve friction performance.

Additives are an integral part of today's fuels. Together with carefully formulated base fuel composition, they contribute to efficiency, dependability and long life of gasoline and diesel engines. As a primer, this paper describes the range of chemical additives formulated for gasoline and diesel fuel and their effects. Specific functions and benefits of additives, typical use levels, and test methods for evaluation are discussed. Additive usage may be divided into three major categories: a) to satisfy desired levels of performance in engines, b) to insure delivery of uncontaminated, on-specification fuels to the end user and c) achieve necessary chemical/physical properties as manufactured by the refiner.

Additives are an integral part of today's fuels. Together with carefully formulated base fuel composition, they contribute to efficiency, dependability and long life of gasoline and diesel engines. As a primer, this paper describes the range of chemical additives formulated for gasoline and diesel fuel and their effects. Specific functions and benefits of additives, typical use levels, and test methods for evaluation are discussed. Additive usage may be divided into three major categories: a) to satisfy desired levels of performance in engines, b) to insure delivery of uncontaminated, on-specification fuels to the end user and c) achieve necessary chemical/physical properties as manufactured by the refiner.

Inconsistent fuel filter life is a problem that continues to plague most heavy-duty diesel fleets. It has been proven that fuel filter life can be strongly influenced by the thermal and oxidative stability of diesel fuel that is being filtered. Filters consistently exposed to diesel fuels that produce a tar-like substance in abundance upon heating (sometimes termed “asphaltenes”) will plug far more rapidly than filters exposed to diesel fuel that does not easily form these tar-like substances. Fuel additives have long been used to maintain fuel system cleanliness and to improve diesel fuel stability. It follows logically that such additives could have a positive impact on fuel filter life by maintaining the cleanliness of the fuel filtration media. This paper reviews the laboratory evaluations and field tests that were run to compare fuel filter life in both the presence and absence of diesel fuel additives.

The lubricant is a key component in the successful operation of a manual transmission, but it is important that the interactive effects with the friction material are understood. This paper examines the effect of several key additive components on the friction and wear performance of a single sinter composition in a carefully controlled laboratory test. In addition, the test method allows one to develop information about the shift behavior of the fluid-synchronizer material combination which provides useful information about shift quality. From the original experimental design program a predictive model was developed and an optimized formulation was tested as a validation of the results.

Using a seven-step quality improvement process, some of the engine build-up factors adversely influencing the severity and precision of the Sequence VI dynamometer test were examined. Insights from engineering (theory) and database (statistical) analyses enabled a 23 factorial experiment to identify oil ring tension, piston ring side clearance, and piston fit as critical parameters in a 3-oil, 9-engine, 28-test program. High ring tension was shown to emphasize the friction reducing capability of higher performing oils and the deficiency of a lower performing oil. Interactions were noted. A helpful correlation of test severity with the engine calibration indicators was shown.

A major drive to develop methanol-fueled vehicles began with the 1973 oil embargo. Early work with dedicated methanol-fueled vehicles demonstrated that lubricant choice influenced engine durability. The qualities desired were not defined by the gasoline engine oil classification system in place at the time. As a result oils were developed which optimized those properties deemed desirable for methanol fuel. The advent of fuel sensors made it possible to design a vehicle which can operate on gasoline or gasoline with varying levels of methanol without intervention by the operator. This created a need for a lubricant that can handle a diversity of methanol/gasoline mixtures as well as conventional gasoline. The paper reviews some of the lubricants that have been used in prototype methanol-capable vehicles and the improvement of these formulations to meet the latest gasoline engine performance criteria while maintaining satisfactory methanol performance.

Piston ring land deposit formation is a key performance criterion in the ASTM Sequence IIIE engine test. Because engine testing of lubricant formulation variables is expensive, a ring land deposit bench test was developed replicating the Sequence IIIE bulk oxidation and deposit formation mechanisms. Following an initial bulk oxidation of the candidate oils, deposits similar in chemical composition and morphology to Sequence IIIE ring land deposits are produced in a modified panel coker apparatus. Good correlation with the ASTM Sequence IIIE engine test has been established. Lubricant additive and base oil effects on oxidation control and deposit formation have been investigated. Their influences on lubricant formulation strategy are discussed.

Information relative to oil thickening has been developed in road tests. Typical operating temperatures, as well as the length of time required to thicken oils in these tests, are described. A laboratory test procedure has been developed that shows a good degree of correlation with this field service. The effect of test conditions such as jacket temperature and piston ring design on oil thickening in the laboratory are described.

The relationship between 76 Racing and NASCAR allowed 76 Lubricants Company to work closely with Richard Childress Racing (RCR) and The Lubrizol Corporation in the development of oil screening and analytical test procedures which permit rapid evaluation of potential top-tier NASCAR race oils. The oils were designed to meet the challenge of increasingly severe engine operating parameters. This paper will discuss dynamometer testing and how properties of the oil such as viscosity grade, base fluid, and additives affect engine durability in the dynamometer test program and performance at the track in NASCAR Winston Cup Racing. Areas of growing concern include the cam/lifter contact, ring/liner contact, wrist pin/pin bore and wrist pin bushing contacts. Racing lubricants must withstand these harsh conditions for periods of 3-4 hours of continuous running.

To meet increasingly stringent emissions and fuel economy regulations, many Original Equipment Manufacturers (OEMs) have recently developed and deployed small, high power density engines. Turbocharging, coupled with gasoline direct injection (GDI) has enabled a rapid engine downsizing trend. While these turbocharged GDI (TGDI) engines have indeed allowed for better fuel economy in many light duty vehicles, TGDI technology has also led to some unintended consequences. The most notable of these is an abnormal combustion phenomenon known as low speed pre-ignition (LSPI). LSPI is an uncontrolled combustion event that takes place prior to spark ignition, often resulting in knock, and has been known to cause catastrophic engine damage. LSPI propensity depends on a number of factors including engine design, calibration, fuel properties and engine oil formulation. Several engine tests have been developed within the industry to better understand the phenomenon of LSPI.

Intentionally adding water to oil, in the laboratory, provides an indication of the oil's ability to tolerate the presence of water. Various characteristics, such as emulsion, haze or separation, may be observed. Some blends of oil and water have been shown to form structures when left undisturbed. A visual, qualitative, storage test is capable of detecting this phenomenon as the presence or absence of structure. However, the time frame of formation can be on the order of days or weeks and is sensitive to handling and temperature effects. Quantitative methods are required for any evaluation of chemistry, temperature and handling effects on the rate and strength of structure formation. This paper describes rheological and electrical methods which directly and indirectly measure the tendency to form a structure at the molecular level, yielding rate of formation and strength information.

The International Lubricant Standardization and Approval Committee (ILSAC) GF-2 specification requires Passenger Car Motor oils to provide enhanced fuel economy in a modern low friction engine (ASTM Sequence VIA). The durability of this fuel economy improvement is becoming increasingly important and will be address in the successor to the Sequence VIA, the Sequence VIB, which is currently under development for ILSAC GF-3. Previous investigations have indicated that the choice of detergent system and friction modifier has a large impact on the fuel economy of a lubricant. As a result of a study undertaken to further investigate these effects in a 1994 Ford Crown Victoria running the EPA Federal Test Procedure, a significant impact on tailpipe emissions was discovered. Detergent system affected both regulated emissions (hydrocarbon (HC), carbon monoxide (CO), and oxides of nitrogen (NOx) emissions), and non-regulated emissions (carbon dioxide emissions).