Search Results

The international Lubricant Standardization and Approval Committee (ILSAC) GF-2 specification requires Passenger Car Motor Oils to provide enhanced fuel economy in a modern low friction engine (ASTM Sequence VIA). In previous SAE publications the authors have studied the boundary lubrication regime and documented the impact of friction modifiers and antiwear additives on Sequence VIA fuel economy. This paper shifts the focus to the hydrodynamic lubrication regime and details fundamental studies of viscosity modifiers and base oils on fuel economy as measured by this low friction engine. The viscosity modifiers were found to have surprisingly little impact on this test, while moving to base oils of higher viscosity index improved fuel economy as might be theoretically expected. A study of formulating SAE 5W-30 motor oils with base oils of increasing viscosity index showed the optimum fuel economy was able to be obtained with a high viscosity index base stock.

There is concern over water-in-oil emulsion formation in passenger cars in the field. Crankcase pressure measurements in the ASTM Sequence IID rust test have been used to indicate possible emulsion formation tendencies of lubricants. This paper presents the development of a short duration emulsion fleet test procedure which demonstrates low car-to- car variability and correlates well with a previous fourmonth winter emulsion fleet test. Physical emulsion characteristics and used oil analyses are described. Evaluation of both Sequence IID reference oils and commercial oils in this field test reveals a lack of correlation between Sequence IID crankcase pressure results and field performance. The new procedure has been applied to investigate the impact of additive and base oil variations on the emulsion-forming tendencies of lubricants in the field. Base oil variables such as viscosity grade, composition, and volatility were evaluated.

The technology has been developed which will allow manufacturers to produce cars capable of running on methanol/gasoline blends with a methanol content up to 85% (i.e., M85). These cars will operate on varying methanol/gasoline ratios without any adjustments from the driver. The dual-fuel capability is attractive since vehicle use will not be handicapped by a restricted fuel distribution system. In addition, it provides the option of running on an environmentally “cleaner” fuel where it is available. The advent of fuel-flexible vehicles encourages the development of lubricants which will satisfy the demands of both fuels. The unique properties of methanol, however, increase the challenges of meeting the lubricant performance needs. Field and engine dynamometer testing have been aimed at understanding the response of key lubricant variables with M85. Short-trip, cold-weather conditions have been of particular concern.

Emissions system durability may be influenced by many engine oil formulation variables. Previous studies have suggested that emissions system durability is optimized by high metal/phosphorus ratios. Reducing the level of phosphorus in the engine oils has also been suggested as a means of prolonging the efficiency of the catalytic converter. This paper explores engine oil formulation variables which may influence the efficiency of the emissions system. Phosphorus type and amount are examined as potential catalytic deactivators, as well as detergent metal interactions with the phosphorus. Dynamometer and over-the-road test data are presented which suggest that the volatility characteristics of the phosphorus component in the engine oil may influence the degree of catalyst contamination. To explore fully the many variables, however, will require an emissions performance test.

Two prominent trends are facing diesel engine builders and their customers, environmental regulations and cost containment. Increasingly stringent exhaust emissions regulations have necessitated major changes in diesel engine design. Combustion temperatures and fuel injection pressures continue to rise. This and other factors, such as lower oil consumption for exhaust particulate reduction, place greater demands on crankcase lubricating oils. Another prominent environmentally related cost factor facing fleet operators is that of waste oil management. The inventory and disposal of used lubricants must now be handled in accordance with regulated guidelines and their associated costs. To compensate, new lubricant categories have been designed in both North America and Europe, such that 1994 and later emission controlled engines will perform as reliably as their earlier counterparts.

Requirements to reduce emissions and improve vehicle fuel economy continue to increase, spurred on by agreements such as the Kyoto Protocol. Lubricants can play a role in improving fuel economy, as evidenced by the rise in the number of engine oil specifications worldwide that require fuel economy improvements. A novel friction modifier technology has been developed to further improve vehicle fuel economy. The development of this novel friction modifier technology which contains only N,O,C,H was previously published along with the initial demonstration of performance in motorized Toyota engines. In order to validate this performance in fired engine tests, oil was evaluated in a Toyota Corolla Fielder with a 1500 cc gasoline engine. Testing was conducted in the Japanese 10-15 and JC08 modes, as well as the European EC mode, and the US FTP mode.

This paper describes the development of a image analysis system that can be used to rate injectors from the Cummins L10 Injector Depositing Test. In the procedure, injectors are mounted on a computer controlled turntable and scanned using a CCD camera focused on the labyrinth flow area of the injector. The scanned monochrome images are processed and assigned an average gray scale rating. Results from the image analysis system are compared to the modified CRC Piston and Ring Rating method currently used within the Cummins test procedure. To do this, a series of injectors that have been rated by trained raters at a recent workshop were also rated via the image analysis system. The image analysis system ratings demonstrated a strong correlation (R = 0.85) to the CRC ratings. Using these same injectors, the image analysis method shows improvements in repeatability and reproducibility of approximately 50% over the current procedure.

A test method has been developed which provides for the rapid measurement of the scuffing performance of diesel fuel using the Ball-On-Cylinder Lubricity Evaluator (BOCLE). A test can be completed in less than one hour. Data has been generated indicating that the method achieves good discrimination between fuels of varying lubricity and correlates well with fuel performance as measured in pump tests.

Gasoline direction injection (GDI) engines have been widely used by light-duty vehicle manufacturers in recent years to meet stringent fuel economy and emissions standards. Particulate Matter (PM) mass emissions from current GDI engines are primarily composed of soot particles or black carbon with a small fraction (15% to 20%) of semi-volatile hydrocarbons generated from unburned/partially burned fuel and lubricating oil. Between 2017 and 2025, PM mass emissions regulations in the USA are expected to become progressively more stringent going down from current level of 6 mg/mile to 1 mg/mile in 2025. As PM emissions are reduced through soot reduction, lubricating oil derived semi-volatile PM is expected to become a bigger fraction of total PM mass emissions.

The effects of gasoline composition, as represented in typical regular and premium unleaded gasolines and fuel additives, on Combustion Chamber Deposits (CCD) were investigated in BMW and Ford tests. In addition, the influences of engine lubricant oil and ethanol oxygenate on CCD were examined in Ford 2.3L engine dynamometer tests. Also, additive effects of packages based on mineral oil fluidizers versus synthetic fluidizers were studied in several different engines for CCD. Finally, a new method for evaluating the effect of fluidizers on valve sticking is introduced.

Modern agriculture has evolved dramatically over the past half century. To be profitable, farms need to significantly increase their crop yields, and thus there are amplified demands on farming equipment. Equipment duty cycles have been raised in scope and duration, as the required output of the agricultural industry to sustain a growing population has stimulated the need for further advances in effective productivity gains on the farm. The mainstay mechanical assistant to the farmer, the tractor, has also evolved with the changes in modern agriculture to meet the requirements of these newer tasks. Larger, more capable vehicles have been introduced to help farmers efficiently meet these demands. At the same time, the current generation of tractor diesel engine lubricants has facilitated high levels of performance in the agricultural equipment market for many years. This is a testament to the role modern lubricants play in productivity in such a critical industry.

Accurate, timely field test results are necessary to develop and validate lubricants meeting frequently changing performance requirements. Field tests can also provide valuable information about performance deficiencies (e.g., soot related wear) which are not apparent in laboratory development tests. Since field tests are time intensive and increasingly expensive, it is imperative that the data generated provide meaningful results with reasonable expenditures. The data generation and analysis process are being constantly improved according to the principles of quality management. Part of the process improvement focuses on accurate, realistic treatment of the data since more variation is typically observed in field tests than in laboratory tests. One of the most difficult analytical processes occurs with oil consumption data.

The proposed International Lubricant Standardization and Approval Committee (ILSAC) GF-2 specification requires Passenger Car Motor Oils to provide enhanced fuel economy in a modern low friction engine (Sequence VIA). This paper details fundamental studies of lubricant effects on fuel economy as measured by this low friction engine. Several conventional friction modifiers were tested with surprising results. One ester friction modifier, Ester B, which provides excellent fuel economy improvement in the Sequence VI, was found to be detrimental to the Sequence VIA. A second ester friction modifier, Ester A, performed as expected. Additionally, two molybdenum compounds, which are reported to provide excellent fuel economy in the Sequence VI, showed no fuel economy benefit in the Sequence VIA.

Recent commercial specification revisions for automatic transmission fluids (ATFs) have focused upon more stringent friction requirements. More stringent friction durability characteristics are assessed using the SAE No. 2 tester. The commercial specifications do not include provisions to evaluate low speed friction characteristics, which have been shown to relate to torque converter shudder. This paper focuses upon effective use of the Falex 6 Multispecimen Tester to evaluate friction durability and to evaluate low speed friction characteristics in conjunction with low speed friction apparatus (LVFA) testing. Falex 6 testing agreed with torque fade observed in SAE No. 2 tests. Low speed stick-slip durability characteristics were effectively differentiated for a number of field ATFs. Falex 6 testing coupled with LVFA testing was shown to correlate with field experience and other test methods related to torque converter shudder.

Interactions between automatic transmission fluid (ATF) components and composite friction materials and their effect on friction system performance continues to be an active area of interest to the automotive industry. A more fundamental understanding is needed of how base fluids, ATF additives, friction materials, and transmission design interact to produce the observed transmission system performance and durability. We herein report results from investigations carried out using a relatively thermo-oxidatively stable polyalphaolefin (PAO) base fluid treated with components representative of several additive types we previously reported to have significant negative effects on frictional performance. Secondly, we investigated a conventionally refined 150 N base oil treated with a calcium sulfonate detergent previously shown to improve friction performance.

This paper provides an overview of gear lubrication related to automotive equipment. A brief background in various aspects of lubrication, including lubrication theory, lubricant evaluation, performance designations, and formulation technology, is presented. This information is designed to assist those involved in the selection of automotive gear lubricants.

Additives are an integral part of today's fuels. Together with carefully formulated base fuel composition, they contribute to efficiency, dependability and long life of gasoline and diesel engines. As a primer, this paper describes the range of chemical additives formulated for gasoline and diesel fuel and their effects. Specific functions and benefits of additives, typical use levels, and test methods for evaluation are discussed. Additive usage may be divided into three major categories: a) to satisfy desired levels of performance in engines, b) to insure delivery of uncontaminated, on-specification fuels to the end user and c) achieve necessary chemical/physical properties as manufactured by the refiner.

Additives are an integral part of today's fuels. Together with carefully formulated base fuel composition, they contribute to efficiency, dependability and long life of gasoline and diesel engines. As a primer, this paper describes the range of chemical additives formulated for gasoline and diesel fuel and their effects. Specific functions and benefits of additives, typical use levels, and test methods for evaluation are discussed. Additive usage may be divided into three major categories: a) to satisfy desired levels of performance in engines, b) to insure delivery of uncontaminated, on-specification fuels to the end user and c) achieve necessary chemical/physical properties as manufactured by the refiner.

The authors provide evidence indicating that oils meeting only the minimum requirements of API GL-5 do not always provide adequate gear protection, especially in severe duty applications. Increases in commercial vehicle power and loading have accentuated the need for oils of greater load carrying ability. A modified version of the standard L-37 test may help identify oils that possess superior durability and thermal characteristics. Future gear lubricants should provide improved fuel economy, increased manual transmission life; and frictional characteristics that allow noise free performance in limited slip differentials.

The lubricant is a key component in the successful operation of a manual transmission, but it is important that the interactive effects with the friction material are understood. This paper examines the effect of several key additive components on the friction and wear performance of a single sinter composition in a carefully controlled laboratory test. In addition, the test method allows one to develop information about the shift behavior of the fluid-synchronizer material combination which provides useful information about shift quality. From the original experimental design program a predictive model was developed and an optimized formulation was tested as a validation of the results.