Search Results

A framework to study the response of seated operators to whole-body vibration (WBV) is presented in this work. The framework consists of (i) a six-degree-of-freedom man-rated motion platform to play back ride files of typical heavy off-road machines; (ii) an optical motion capture system to collect 3D motion data of the operators and the surrounding environment (seat and platform); (iii) a computer skeletal model to embody the tested subjects in terms of their body dimensions, joint centers, and inertia properties; (iv) a marker placement protocol for seated positions that facilitates the process of collecting data of the lower thoracic and the lumbar regions of the spine regardless of the existence of the seatback; and (v) a computer human model to solve the inverse kinematics/dynamic problem for the joint profiles and joint torques. The proposed framework uses experimental data to answer critical questions regarding human response to WBV.

Active steering systems can help the driver to master critical driving situations. This paper presents a fuzzy logic control strategy on active steering vehicle based on a multi-body vehicle dynamic model. The multi-body vehicle dynamic model using ADAMS can accurately predict the dynamic performance of the vehicle. A new hybrid steering scheme including both active front steering (applying an additional front steering angle besides the driver input) and rear steering is presented to control both yaw velocity and sideslip angle. A set of fuzzy logic rules is designed for the active steering controller, and the fuzzy controller can adjust both sideslip angle and yaw velocity through the co-simulation between ADAMS and the Matlab fuzzy control unit with the optimized membership function. To ensure the design of high-quality fuzzy control rules, a rule optimization strategy is introduced.

A method to simulate digital human running using an optimization-based approach is presented. The digital human is considered as a mechanical system that includes link lengths, mass moments of inertia, joint torques, and external forces. The problem is formulated as an optimization problem to determine the joint angle profiles. The kinematics analysis of the model is carried out using the Denavit-Hartenberg method. The B-spline approximation is used for discretization of the joint angle profiles, and the recursive formulation is used for the dynamic equilibrium analysis. The equations of motion thus obtained are treated as equality constraints in the optimization process. With this formulation, a method for the integration of constrained equations of motion is not required. This is a unique feature of the present formulation and has advantages for the numerical solution process.

One-sixth scale model airbag modules have been used to investigate flow aspiration effects in passenger-side airbag modules. A similarity analysis between flows in the model and the prototype unit assures reasonable approximation of the actual flows. In the controlled flow environment of the model, flow visualization suggests that the underexpanded jet structure follows the universal relationship based on experimental data and shows that aspiration occurs through the aspiration holes. Detailed velocity measurements provide the ratio of the mass added to the discharged gas for a single firing. The same approaches can be applied in the design of full-scale airbag systems.

A framework to validate the predicted motion of a computer human model (Santos) is presented in this work. The proposed validation framework is a task-based methodology. It depends on the comparison of selected motion determinants and joint angles that play major roles in the task, using qualitative and quantitative statistical techniques. In the present work, the validation of Santos walking will be presented. Fortunately, the determinants for normal walking are well defined in the literature and can be represented by (i) hip flexion/extension, (ii) knee flexion/extension, (iii) ankle plantar/dorsiflexion, (iv) pelvic tilt, (v) pelvic rotation, and (vi) lateral pelvic displacement. While Santos is an ongoing research project, the results have shown significant qualitative agreements between the walking determinants of Santos and the walking determinants of four normal subjects.

Simulating human motion is a complex problem due to redundancy of the human musculoskeletal system. The concept of task-based motion prediction using single- or multi-objective optimization techniques provides a viable approach for predicting intermediate motions of digital humans. It is shown that task-based motion prediction is in fact a numerical optimal control problem. Alternative formulations for simulation of human motion are possible and can be solved by modern nonlinear optimization methods. Three techniques based on state variable elimination, direct collocation and differential inclusion are presented and compared. The basic idea of the formulations is to treat different combinations of the state variables, such as the joint profiles and torques or their parametric representations as independent variables in the optimization process.

New methods for fast, adaptive motion prediction of a virtual human are proposed and tested. An optimal locomotion for gait-driven motions like pushing, climbing and pick-up/delivery are sought through gradient-based optimization and inverse-dynamics. Such gait-driven motion can be produced by adapting the normal gait motion to the case when a characteristic force is applied, which is called an applied force. The applied force is a resistance force for pushing case and an object weight for delivery case. The concept of the zero moment point is modified to assess the dynamic equilibrium of the motion in presence of the applied force. For fast calculation, analytical forms of the cost/constraint gradients are provided. Stepping patterns are specified a priori to ensure the continuity of the cost/constraint function gradients. Also, by varying knots for the B-spline curve approximation, the gait stage durations are optimized.

In the Army mechanical fatigue subject to external and inertia transient loads in the service life of mechanical systems often leads to a structural failure due to accumulated damage. Structural durability analysis that predicts the fatigue life of mechanical components subject to dynamic stresses and strains is a compute intensive multidisciplinary simulation process, since it requires the integration of several computer-aided engineering tools and considerable data communication and computation. Uncertainties in geometric dimensions due to manufacturing tolerances cause the indeterministic nature of the fatigue life of a mechanical component.

Experimental analysis of human motion has been based on optical, magnetic, or electronic tracking techniques to determine body segment locations and orientations. The Average Coordinate Reference System (ACRS) method was developed to reduce experimental errors in human locomotion analysis. Experimentally measured kinematic data is used to conduct analysis in human modeling, and the model accuracy is directly related to the accuracy of the data. However, the accuracy is questionable due to skin movement, deformation of skeletal structure while in motion and limitations of commercial motion analysis systems. In this study, the ACRS method is applied to an optically-tracked segment marker system, although it can be applied to many of the others as well. Many previous studies adopted redundant marker systems, using four or five optical markers, instead of the basic three marker system to provide statistically better results of body segment position and orientation.

The objective of this research was to obtain and compare fracture toughness, stress corrosion cracking and constant and variable amplitude fatigue behavior of AZ91E-T6 cast magnesium alloy in both an air and 3.5% NaC1 corrosive environment. An additional objective was to determine if commonly used models that describe fatigue behavior and fatigue life are applicable to this material and test environments. Fatigue tests included constant amplitude strain-controlled low cycle fatigue with strain ratio, R, equal to 0,−1 and −2, Region II constant amplitude fatigue crack growth with load ratio, R, equal to 0.05 and 0.5 and variable amplitude fatigue tests using keyhole notched specimens. In all fatigue tests, the corrosion environment was significantly detrimental relative to the air environment. The material was also susceptible to stress corrosion cracking. Low cycle fatigue models and the Paris equation properly represented the fatigue data in both environments.

Our previous formulation for optimization-based dynamic motion simulation of a serial-link human upper body (from waist to right hand) is extended to predict the motion of a tree-structured human model that includes the torso, right arm, and left arm, with various applied external loads. The dynamics of tree-structured systems is formulated and implemented. The equations of motion for the tree structures must be derived carefully when dealing with the connection link. The optimum solution results show realistic dual-arm human motions and the required joint actuator torques. In the second part of this paper, a new method is introduced in which the constraint forces and moments at the joints are calculated along with the motion and muscle-induced actuator torques. A set of fictitious joints are modeled in addition to the real joints.

The objective of this paper is to present our method of predicting and simulating visually realistic and dynamically consistent human stair-climbing motion. The digital human is modeled as a 55-degrees of freedom branched mechanical system with associated human anthropometry-based link lengths, mass moments of inertia, and centers of gravity. The joint angle profiles are determined using a B-spline-based parametric optimization technique subject to different physics-based, task-based, and environment-based constraints. The formulation offers the ability to study effects of the magnitude and location of external forces on the resulting joint angle profiles and joint torque profiles. Several virtual experiments are conducted using this optimization-based approach and results are presented.

Due to the influence of non-linear dynamic characteristic of clutch, time-delays, external disturbance and parameter uncertainty, it is difficult to control the automated clutch precisely during the engaging process of the automated clutch for automatic mechanical transmission (AMT) vehicles. Here, an enhanced fuzzy sliding mode controller (EFSMC) has been proposed to control the automated clutch. To meet the real-time requirement of the automated clutch, the region-wise linear technology is adapted to reduce the fuzzy rules of the EFSMC. The simulation results have shown that the proposed controller can achieve a higher performance with minimum reaching time and smooth control actions. In addition, it shows that the controller is effective and robust to the parametric variation and external disturbance.

This paper describes an effective integrated method for estimation of subject-specific mass, inertia tensor, and center of mass of individual body segments of a digital avatar for use with physics-based digital human modeling simulation environment. One of the main goals of digital human modeling and simulation environments is that a user should be able to change the avatar (from male to female to a child) at any given time. The user should also be able to change the various link dimensions, like lengths of upper and lower arms, lengths of upper and lower legs, etc. These customizations in digital avatar's geometry change the kinematic and dynamic properties of various segments of its body. Hence, the mass and center of mass/inertia data of the segments must be updated before simulating physics-based realistic motions. Most of the current methods use mass and inertia properties calculated from a set of regression equations based on average of some population.

Aspirating airbag modules are unique from other designs in that the gas entering the airbag is a mixture of inflator-delivered gas and ambient-temperature air entrained from the atmosphere surrounding the module. Today's sophisticated computer simulations of an airbag deployment typically require as input the mass-flow rate, chemical composition and thermal history of the gas exiting the canister and entering the airbag. While the mass-flow rate and temperature of the inflator-delivered gas can be obtained from a standard tank test, information on air entrainment into an aspirated canister is limited. The purpose of this study is to provide quantitative information about the aspirated mass-flow rate during airbag deployment. Pressure and velocity measurements are combined with high-speed photography in order to gain further insight into the relationship between the canister pressure, the rate of cabin-air entrainment and the airbag deployment.

Fatigue crack growth behavior was obtained for the SAEFDE Committee's round-robin A356-T6 cast aluminum alloy program with crack growth rates between 10−11 and 10−6 m/cycle for R-ratios equal to 0.1 and 0.5. Three different mold temperatures resulted in secondary dendrite arm spacings (DAS) that varied from approximately 80 to 90 µm, resulting in only coarse microstructure. Threshold levels, ΔKth, and the Paris exponent, m, were approximately twice the values usually found for wrought aluminum alloys. The influence of R-ratio was quite pronounced and crack closure, as measured with a crack mouth COD gage, did not eliminate all threshold and near-threshold R-ratio differences. Roughness-induced crack closure appeared to be more important than plasticity-induced closure.

A continuation of the SAEFDE round-robin fatigue test program was conducted to determine the influence of a finer microstructure on monotonic tension, strain-controlled low cycle fatigue, fatigue crack growth, and fracture toughness of A356-T6 cast aluminum alloy. The finer microstructure castings, referred to as material W, were obtained using a water-chilled sand casting procedure. Material W exhibited more desirable ductile behavior than the previous SAEFDE materials X, Y, and Z. Material W exhibited superior smooth specimen low cycle fatigue resistance at both short and long lives, when compared to materials X, Y, and Z. This was due in part to the higher ductility and lower porosity of material W over materials X, Y, and Z. Material W exhibited similar fatigue crack growth behavior, and slightly higher values of fracture toughness at the same thickness when compared to materials X, Y, and Z.

SI property class 12.9 high strength steel bolts were used to investigate the fatigue behavior of bolt threads rolled before/after heat treatment using two different thread profiles and five different preload values. Bolts were 3/8 UNRC-16 (coarse) and 3/8 UNRF-24 (fine) and preloads were taken as 1, 50, 75, 90, and 100% of roll before heat treatment proof stress. Maximum near surface residual compressive stresses, obtained via x-ray diffraction, ranged from -500 to -1000 MPa. Axial loads were applied through the nut and all fatigue failures occurred at the first thread of the nut/bolt interface. SEM evaluation indicated all fatigue crack growth regions contained multiple fatigue facets, while final fracture regions were ductile dimples.

Fracture toughness tests were conducted on the SAEFDE Committee's round-robin A356-T6 cast aluminum alloy materials designated X, Y and Z. Compact type specimens with a thickness of 9.1 and 20.3 mm were tested. Valid Klc values couid not be obtained for 9.1 mm thick specimens but were obtained for 20.3 mm thickness specimens. Due to larger castings, and hence slower cooling rates, a coarse secondary dendrite arm spacing, DAS, of 80 to 90 μm existed in the three materials. Similar Klc values were 18, 16.7 and 17.3 for the A356-T6 materials X, Y and Z respectively. Final fracture surfaces were also similar with predominant cleavage fracture with some localized ductile dimples and secondary cracking.

We propose an algorithm of predicting dynamic biped motions of Santos™ human model. An alternative and efficient formulation of the Zero-Moment Point (ZMP) for dynamic balance and the approximated ground reaction forces/moments are derived from the resultant reaction loads, which includes the gravity, the externally applied loads, and the inertia. The optimization problem is formulated to address the redundancy of the human task, where the general biped and the task-specific constraints are imposed depending on the task requirements. The proposed method is fully predictive and generates physically feasible human-like motions from scratch without any input reference from motion capture or animation. The resulting generated motions demonstrate how a human reacts effectively to different external load conditions in performing a given task by showing realistic features of cause and effect.