Search Results

Advanced aluminum solutions for next-gen aerospace structures Airline competitiveness and the demand for improved aircraft performance and affordability (acquisition and operational) are driving advancements in technologies that can enable these improvements. 2050 vision Airbus provides a far-ranging, thought-provoking, reach-out toward some of the changes the commercial aerospace industry might expect to see by 2050.

High hopes or just dreaming? A look at how Asia's aircraft manufacturers are trying to break into new markets to challenge the status quo. Camelina-based biofuel shows advantages in turboprop Researchers within the government of Canada see the need to improve the emissions performance of the Rolls-Royce T56 engine, which despite its age remains a workhorse for its military aircraft fleet.

Propulsion Fanjet Evolution - the Next Steps Composites Dry Drilling Composites Using Carbon Dioxide Cooling

Seeing the Light Achieving Full-Color, Day or Night Readability for Flat-Panel Displays Multiple Node Networking Using PCIe Interconnects PCI Express (PCIe) interconnects, and how they can be used to support multiple node low latency data transfers over copper or optical cables, is gaining momentum in embedded computing solutions. Zero-Emissions Electric Aircraft Theory vs Reality Analyzing Radar Signals With Demodulation Combining Software and Hardware for Highly Specialized Multichannel Spectrum Monitoring Advanced Thermal Management Solutions Thermoelectric Cooling Thermal Ground Planes Thermal Management of Laser Diodes The Effect of Substrate Emissivity on the Spectral Emission of a Hot-Gas Overlayer Process Approach to Determining Quality Inspection Deployment Experimental Setup to Assess Blast and Penetration-Induced Secondary Debris in a Military Operations in Urban Terrain (MOUT) Environment Non-Contact Circuit for Real-Time Electric and Magnetic Field Measurements

The Rapid Rise of Beryllium-Aluminum Alloys in Aerospace Aeroacoustic Simulation Delivers Breakthroughs in Aircraft Noise Reduction Using System Simulation to Manage Increasing Thermal Loads on Aircraft Fuel Systems Ensuring the Compliance of Avionics Software with DO-178C Microwave Photonic Notch Filter Helps Ensure Critical Mission Success Measuring Propellant Stress Relaxation Modulus Using Dynamic Mechanical Analyzer New testing technique requires less material, gives more accurate results. Combustion Characteristics of Hydrocarbon Droplets Induced by Photoignition of Aluminum Nanoparticles Test methodology allows analysis of combustion dynamics for subscale rocket injectors under super critical conditions. Vapor Pressure Data and Analysis for Selected Organophosphorous Compounds: DIBMP, DCMP, IMMP, IMPA, EMPA, and MPFA Determining the thermophysical properties of chemical warfare agent simulants can help evaluate the performance of defensive equipment.

Electrifying Aviation: The Path to Decarbonizing the Skies /Electric aviation mirrors the early stages of the electric vehicle revolution Advances in Military Avionics Technologies Create New Challenges for RF Test and Measurement Plasma Electrolytic Oxidation: The Future of Lightweight Designs in Aerospace and Defense Advanced RF Simulation Reduces Cost and Schedule Risk Assure 5G NTN Performance Before Launch In the complex and quickly evolving 5G NTN landscape, simulating, emulating, and evaluating RF systems boosts mission success. Qualification of Multi-Channel Direction Finding Radar Receivers in The Lab Bullet Impact Testing of Ammunition and Explosives at Picatinny Arsenal A bullet impact (BI) test for evaluating the response of energetically loaded items has been established at the U.S. Army Combat Capabilities Command (DEVCOM) Armaments Center (AC) Explosive Development Facility.

Additive Manufacturing How 3D Printing Will Transform the A&D Support Chain Advances in Lightweight Electronics Protection Conformal Coatings Increase Reliability of Aerospace and Military Assemblies Powering Outer Space An In-Depth Look at Aerospace Battery Technology Using High Bandwidth Oscilloscopes to Analyze Radar and Electronic Warfare Systems Bio-inspired Airborne Infrastructure Reconfiguration (BioAIR) EMI Analysis Software Helps Telescope Group Simulate RFI Mitigation Epitaxial Growth of Rhenium with Sputtering Processing and Characterization of Polycrystalline YAG (Yttrium Aluminum Garnet) Core-Clad Fibers Multi-Scale Analysis of Deformation and Failure in Polycrystalline Titanium Alloys Under High Strain Rates Abrasion Testing of Products Containing Nanomaterials Spectrum Fatigue of 7075-T651 Aluminum Alloy under Overloading and Underloading

Engineered Solutions for Enclosure Sealing and Insulation Tips for Reducing Error When Using Eddy Current Measuring Techniques Reducing the High Cost of Titanium Streamlining Post-Processing in Additive Manufacturing Software-Defined Analog Filters: A Paradigm Shift in Radio Filter Performance and Capability SDR Interface for the NeXtRAD Multistatic Radar System Electrodeposition of Metal Matrix Composites and Materials Characterization for Thin-Film Solar Cells Metal matrix composites, which consist of silver-multiwalled carbon nanotube-silver, layer-by-layer stacks, can electrically bridge the cracks (>40 μm) that appear in semiconductor substrates and the composite grid lines. Sensing Applied Load and Damage Effects in Composites with Nondestructive Techniques Comparing and correlating piezoelectrically induced guided waves, acoustic emission, thermography, and X-ray imaging to determine the effects of applied load on a composite structure.

Why are Aerospace & Defense Companies Embracing Additive Manufacturing? Simplifying Power Design with Modular Architectures The Role of DevSecOps in Modern Edge Systems Making Machines Curious Designing Multi-Channel Microwave Radio Systems Using Optical Interconnects Solving Military Satellite, Radar and 5G Communications Challenges with GaN-on-SiC MMIC Power Amplifiers Advanced Airborne Defensive Laser for Incorporation on Strike Fighter Aircraft A technical and operational analysis of an airborne "hard-kill" Ytterbium fiber laser-based anti-missile system for use on strike fighters. Additive Manufacturing Utilizing a Novel In-Line Mixing System for Design of Functionally Graded Ceramic Composites Exploring the development of a direct ink writing system with multimaterial and in-line mixing capabilities for printing inks composed of high solids-loaded ceramic particulate suspensions.

Thermal simulation and testing of expanded metal foils for lightning protection With the implementation of major aircraft structures fabricated from carbon fiber reinforced plastic materials, lightning protection has become a more complicated issue for designers and engineers to solve. Electronics take charge Digital controls are handling more engine control tasks on a wider range of aircraft.

Open Standard Middleware Enables New HPEC Solutions Cooling Your Embedded System What Can Your Open Standard Architecture Handle? Evaluating Key Certification Aspects of Multicore Platforms for Safety Critical Avionics Applications Simulating and Analyzing Flow for an Air-to-Air Refueling System The Ins and Outs of Spaceflight Passive Components and Assemblies Development of High Quality 4H-SiC Thick Epitaxy for Reliable High Power Electronics Using Halogenated Precursors Silicon Based Mid-Infrared SiGeSn Heterostructure Emitters and Detectors Reconfigurable Electronics and Non-Volatile Memory Research Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely Low Energy Consumption Electronics

What system Designers Should Know About MOSA Standards Microtube Technology A Catalyst for Next-Gen Aerospace Thermal Control Space Industry Test Challenges Advancing Metrology at Mach Speed Drone Mounted Inspection Breaks Barriers for F-35 RF Technology Helps Connect Avionics Systems Using Open-Cavity Plastic Packages in Avionics Applications Electronic Prognostics - A Case Study Using Global Positioning System (GPS) Prognostic health management (PHM) of electronic systems presents challenges traditionally viewed as either insurmountable or not worth the cost of pursuit, but recent changes in weapons platform acquisition and support requirements has spurred renewed interest in electronics PHM, revealing possible applications, accessible data sources, and previously unexplored predictive techniques.

Eyes in the Sky Rugged High-Speed Cameras Capture Critical Flight Test Video Data Panoramic Thermal Imaging Technology A New Concept in Naval Defense Coating Technology Enables Effective Missile Countermeasures FACE™ - Future Airborne Capability Environment Diminishing U.S. Combat Superiority Drives New Software Development Requirements Broadband 1.2- and 2.4-mm Gallium Nitride (GaN) Power Amplifier Designs Multi-Agent RF Propagation Simulator Electrical Characterization of Crystalline UO2, THO2 and U0.71TH0.29O2 Evaluating the suitability of advanced alloys for use in uranium-based neutron detectors. ONR Short Pulse Research, Evaluation and non-SWaP Demonstration for C-sUAV Study Research project is designed to map small unmanned aerial vehicle (sUAV) effects space, empirically and by simulation, as a function of high power microwave (HPM) waveform to develop effective countermeasures.

Simulating lightweight vehicles operating on discrete terrain Researchers characterize the mobility of autonomous reconnaissance vehicles on terrain considered to be deformable, and represented as a collection of bodies of spherical shape.

How Electrification and Autonomy Can Unlock the Potential of Unmanned Ground Vehicles VITA 90: Small Form Factors for UAVs and Other Space Constrained Platforms 3D Scanning Provides Key Weapon for Aerospace and Defense Manufacturing New Approach to Viscosity Enables Complex Motions in Soft Robots Ghoul Tool: The Weapon-Mountable Counter UAS Transmitter Autonomous Surveillance Technologies Relating to Dismounted Soldiers The development of the autonomous applications for dismounted Soldier systems is paramount to defeating our adversaries, such as China and Russia, in future combat. A comprehensive literature re-view is necessary to assist in defining the best path forward. Robust MADER: Decentralized Multiagent Drone Trajectory Planner Communication delays can be catastrophic for multiagent systems. However, most existing state-of-the-art multiagent trajectory planners assume perfect communication and therefore lack a strategy to rectify this issue in real-world environments.

On-Orbit Satellite Refueling Flow Measurement The Path from Concept to Operational Status Radiation Tolerant "Smart Backplanes" for Spacecraft Avionics Using Heat Pipes to Cool Embedded Computers Electronically Dimmable Aircraft Windows How do you block the light of the sun? Eliminating Electrical Arcing in Satellite Systems NASA Miniaturizes Century-Old Radio Sounder Technology Developing an Airborne Optical Systems Testbed (AOSTB) New Class of Excimer-Pumped Atomic Lasers (XPALS) Research demonstrates the viability of an atomic laser having a quantum efficiency greater than one. Hydrodynamic Drag Force Measurement of a Functionalized Surface Exhibiting Superhydrophobic Properties Comparing the skin friction drag effects of a superhydrophobic flat plate to an untreated flat plate of the same material and geometry.

The Sky is No Longer the Limit Celebrating 75 Years of Air Force Technology Air Force Technology Timeline Leveraging New Technologies for Mil/Aero Electronic Systems MOSA Enclosure Design for Military Systems Three Challenges to 5G's Military Success How to Specify and Select RF Filters Investigation of Requirements and Capabilities of Next-Generation Mine Warfare Unmanned Underwater Vehicles Model-based systems engineering (MBSE) tools, including functional flow block diagrams and functional hierarchies, are used to logically define mine countermeasure (MCM) UUV operations and support the development of alternative concepts of operations. On the Pulsed Laser Ablation of Metals and Semiconductors A comparison of effects across disparate experimental regimes through the study of pulsed laser ablation over several orders of magnitude in pulse duration, fluence, and material properties.

Casting a vote for alloys Bringing lighter weight, improved performance, and enhanced repairability to airframes and engines. A sense of the future for UAVs Providing the unblinking eye for intelligence, surveillance, and reconnaissance. Light material brings heavy challenges Shift from aluminum to composites requires major changes in equipment, software. Ryan's 'Research' put to good use The Southwest Research Institue engineer assumes SAE President duties for 2008.

From concept in mind to product in hand Compatibility between tools for design and manufacturing engineers is improving, though it's still fraught with potential pitfalls. Cockpits on display Larger (and eventually bendable) flight displays use commercial technology for both new production and retrofit applications. Interior interests Makers of business aircraft take different approaches to designing interiors. Aerospace proves its metal Aluminum lithium, magnesium alloys, titanium metal matrix composites, and advanced coatings are all part of the future of flying.

From part to plane: the fastest machine wins Next-gen machining centers and controllers brings new precision and capabilities to both metal and composite manufacturing. Files moved around the world As aircraft manufacturers distribute more jobs to contractors, streamlining the transfer of information has become an important part of both design and manufacturing. Top technologies of 2008 A look back at some of the most significant technological innovations during the past year. VLJ power Some engine programs for very light jets are full swing while certification awaits others.