Search Results

Ford GT 2005 vehicle was designed for performance, timing, cost, and styling to preserve Ford GT40 vintage look. In this vehicle program, many advanced manufacturing processes and light materials were deployed including aluminum and magnesium. This paper briefly explains one unique design concept for a Ford GT instrument panel comprised of a structural magnesium cross-car beam and other components, i.e. radio box and console top, which is believed to be the industry's first structural I/P from vehicle crash load and path perspectives. The magnesium I/P design criteria include magnesium casting properties, cost, corrosion protection, crashworthiness assessments, noise vibration harshness performance, and durability. Magnesium die casting requirements include high pressure die cast process with low casting porosity and sound quality, casting dimensional stability, corrosion protection and coating strategy, joining and assembly constraints.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have one slash/detail specs.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have one slash/detail specs.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have three slash/detail specs.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have three slash/detail specs.

Challenges surrounding OEM′s go far beyond to manufacture and delivery high quality vehicles. A perfect design and performance in the lowest cost possible is extremely essential to delivery to the customer the best vehicles. In order to guarantee all these targets, a robust process must be set to developed and implemented. It is known all process limitations, which faces the emergent markets and the lack of infrastructure considering the developed countries. All this limitations can deeply affect the robustness of the process. Some innovative solutions are becoming common from the engineering development combined with the manufacturing team to work out these limitations and provide excellent process stability. In this present paper it will be discussed the Bi component structural adhesive (2K PU epoxy) utilization to establish the process in the assembly line, mainly in order to improve parts dimensionally.

Automotive friction materials are composites containing three kinds of components: an organic binder, fiber for reinforcement, and property modifiers. At low braking temperatures, the wear rate of the friction materials is controlled primarily by abrasive and adhesive mechanisms. At higher braking temperatures, the wear rate increases exponentially with increasing temperature due to thermal degradation of the binder and other components, and the exponential wear rate is frequently accompanied by brake fade. Thus, one method of reducing thermal wear and fade tendency is to lower the temperature at the rotor/friction material interface. Since the rate of heat transfer from the interface is mostly dependent upon the conductive and convective modes, a rotor of high thermal conductivity will have a significant advantage over a rotor of low conductivity, if the heat capacity remains the same.

Chopped carbon fiber sheet molding compound (SMC) material is a promising material for mass-production lightweight vehicle components. However, the experimental characterization of SMC material property is a challenging task and needs to be further investigated. There now exist two ASTM standards (ASTM D7078/D7078M and ASTM D5379/D5379M) for characterizing the shear properties of composite materials. However, it is still not clear which standard is more suitable for SMC material characterization. In this work, a comparative study is conducted by performing two independent Digital Image Correlation (DIC) shear tests following the two standards, respectively. The results show that ASTM D5379/D5379M is not appropriate for testing SMC materials. Moreover, the failure mode of these samples indicates that the failure is caused by the additional moment raised by the improper design of the fixture.

Nickel-5 Aluminum (95 % Nickel-5 % Aluminum) is widely used in the aircraft engine industry. The excellent adhesive and cohesive strength of the coating, oxidation resistance and machinability make it an ideal material as both a bond coat for subsequent topcoats and as a build up material for dimensional restoration of worn or mismachined components. Plasma spraying has traditionally been the thermal spray process used to apply nickel aluminum, and the technical properties and performance characteristics are well documented. More recently, wire arc sprayed nickel aluminum is becoming widely used as an alternative to plasma spraying due to higher bond strengths, reproducibility, better machinability and more favorable economics. This paper presents the results of a testing program designed to compare the technical properties of arc sprayed versus plasma sprayed Nickel-5 Aluminum coatings.

The vast majority of products contain joints, therefore, joining technology is key to the strategic implementation of new materials. This paper considers three innovative solutions to industrial problems ClearWeld™ A recently developed technique for laser welding materials, creating a joint almost invisible to the human eye. AdhFAST™ This novel, three-in-one fastener, allows adhesive to be injected through the middle of the device whilst retaining the joint and controlling bondline thickness Vitresyn™ Transparent plastics such as polycarbonate and acrylic have the potential to replace glass in a number of applications, car headlamps and spectacle lenses for example. However, these plastics are relatively soft materials and need protection against abrasion and scuff damage. This recently developed system gives good protection at acceptable cost

Ice adhesion characterization relies heavily on experimental data, especially when dealing with fracture parameters. In this paper, a complementary framework encompassing experimental testing with the numerical treatment of the fracture variables is proposed to provide a physical description of adhesive fracture propagation at the interface of an iced structure. The tests are based on a quasi-static flexural testing setup composed of a displacement-driven actuator and an iced plate. The measured crack length and plate deflection provide the data to be analyzed by the Virtual Crack Closure Technique in order to approximate the critical energy release rate required to study adhesive fracture propagation. The critical energy release rate in mode II is under-predicted and its value is approximated using its counterpart in mode I.

Self-piercing rivet (SPR) joints are a key joining technology for lightweight materials, and they have been widely used in automobile manufacturing. Manual visual crack inspection of SPR joints could be time-consuming and relies on high-level training for engineers to distinguish features subjectively. This paper presents a novel machine learning-based crack detection method for SPR joint button images. Firstly, sub-images are cropped from the button images and preprocessed into three categories (i.e., cracks, edges and smooth regions) as training samples. Then, the Artificial Neural Network (ANN) is chosen as the classification algorithm for sub-images. In the training of ANN, three pattern descriptors are proposed as feature extractors of sub-images, and compared with validation samples. Lastly, a search algorithm is developed to extend the application of the learned model from sub-images into the original button images.

Urethane is utilized to bond the windshield and backlite to the vehicle frame. The contribution of different modulii of glass bonding urethane adhesives on the stiffness characteristics of the vehicle is studied through finite element analysis. The modal analyses of a finite element body-in-white model with different modulii of urethanes are performed, and the analyses show that high modulus urethane makes notable contribution to the vehicle stiffness. The optimized modulus of urethane adhesive is suggested based on the analyses.

Effective use of adhesive bonding in automotive vehicle bodies requires analytical methods for durability, so that potential fatigue problems and unnecessary overdesign may be eliminated before the physical prototype stage and release of product with unquantified safety factors avoided. This paper describes a fracture mechanics-based method for predicting the durability of adhesive joints, based on work previously carried out at Volvo [1]. The method requires relatively modest modifications to a typical vehicle body FE mesh. Adhesive bonds are represented by bar elements around the periphery of each bond. Grid point forces from shell elements adjacent to the adhesive bond are recovered and used to determine line forces and moments at the edge of the glued flange. These forces and moments are then transferred to an analytical sandwich model of the joint.

This SAE Aerospace Information Report (AIR5271) covers the basic attributes of a second-generation robust, reliable high-density fiber optic interconnect system for aerospace applications. The intent is to take advantage of recent commercial developments in materials, components and manufacturing methods to develop rugged high-density fiber optic interconnects optimized for aerospace and automotive applications, which can accommodate a variety of optical fiber waveguide types. These waveguide types include single mode and multi-mode glass/glass fibers and waveguides, plastic clad silica fibers and waveguides, and all polymer fibers and waveguides. This second generation interconnect system should represent a dramatic improvement over first generation. The cable should be extremely robust eliminating any concerns over cable damage or fiber breakage in an aerospace environment.

This project team conducted a life-cycle-based environmental evaluation of new, lightweight materials (e.g., titanium, magnesium) used in two concept 3XVs -- i.e., automobiles that are three times more fuel efficient than today's automobiles -- that are being designed and developed in support of the Partnership for a New Generation of Vehicles (PNGV) program. The two concept vehicles studied were the DaimlerChrysler ESX2 and the Ford P2000. Data for this research were drawn from a wide range of sources, including: the two automobile manufacturers; automobile industry reports; government and proprietary databases; past life-cycle assessments; interviews with industry experts; and models.

Automotive design efforts to resolve the conflict imposed by Federal regulations governing Corporate Average Fuel Economy (CAFE) and the inherent weight penalty of FMVSS-215 Bumper Standards have centered around lightweight material substitutions, most notably HSLA steels and aluminum. Recent developments in non-metallic structures are directed at further reduction in the weight penalties of steel and the cost penalties of aluminum. This study presents the investigation of a continuous glass fiber reinforced thermoplastic in a light-weight, energy-absorbing bumper system through its design, fabrication and successful prototype testing. Material properties, design parameters, molding process and vehicle impact testing will be reviewed.

Adhesive bonding technology is playing an increasingly important role in automotive industry. Ultrasonic evaluation of adhesive joints of metal sheets is a challenging problem in Non-Destructive Testing due to the large acoustic impedance mismatch between metal and adhesive, variability in the thickness of metal and adhesive layers, as well as variability in joint geometry. In this paper, we present the results from a matrix array of small flat ultrasonic transducers for evaluation of adhesively bonded joints in both laboratory and production environments. The reverberating waveforms recorded by the array elements are processed to obtain an informative parameter, whose two-dimensional distribution can be presented as a C-scan. Energy of the reflected waveform, normalized with respect to the energy obtained from an area with no adhesive, is a robust parameter for discriminating "adhesive/no-adhesive" regions.