Search Results

To assure customer satisfaction, aerospace industry manufacturers must produce world class quality products at the lowest possible cost. This document standardizes, to the greatest extent possible, the quality system requirements of the aerospace industry. Standardization of compliance requirements results in cost savings due to the elimination or reduction of unique requirements developed for each different customer.

This SAE Aerospace Recommended Practice (ARP) specifies for quality requirements that are additive to a procurement document or contract, where an organization: a needs to provide additional guidance for suppliers and other organizations in the delivery of products, goods and services in accordance with stated quality demands, and b needs to provide information in addition or in absence of existing quality system requirements to provide the assurance of conformity to customer and applicable regulatory requirements. NOTE: In this ARP, the term ‘product’ applies only to the product intended for, or required by, a customer.

This SAE Aerospace Recommended Practice (ARP) specifies for quality requirements that are additive to a procurement document or contract, where an organization: a needs to provide additional guidance for suppliers and other organizations in the delivery of products, goods and services in accordance with stated quality demands, and b needs to provide information in addition or in absence of existing quality system requirements to provide the assurance of conformity to customer and applicable regulatory requirements. NOTE: In this ARP, the term ‘product’ applies only to the product intended for, or required by, a customer.

This SAE Aerospace Standard (AS) establishes documentation requirements for the First Article Inspection (FAI).

This standard establishes the baseline requirements for performing and documenting FAI. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements shall take precedence.

This SAE Aerospace Standard (AS) establishes requirements for performing and documenting the First Article Inspection (FAI).

This SAE Aerospace Standard (AS) establishes documentation requirements for the First Article Inspection (FAI).

This SAE Aerospace Standard (AS) establishes documentation requirements for the First Article Inspection (FAI). The purpose of the First Article Inspection is to provide objective evidence the all engineering design and specification requirements are properly understood, accounted for, verified, and documented. The purpose of this document is to provide a consistent documentation requirement for aerospace components First Article Inspection. It is the intent that the documentation generated will be a quality record of the supplier and customer for review of accountability and planning, for performing periodic surveillance and audits to verify conformance, for evaluating root cause and corrective action for any non-conformance, and for problem ionvestigations.

Operator Self-Verification can apply to a variety of processes. The primary focus is on traditional manufacturing operations, but applications can be made wherever traditional inspection methods are employed. The practices recommended in this document are intended to identify the basic elements for structuring Operator Self-Verification programs within the aerospace industry; applicable to producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines and composite components. Operator Self-Verification programs are applied to improve overall efficiency and product quality to processes considered mature, as judged by the organization. Operator Self-Verification programs are not stand-alone processes, but augment existing quality management system standard requirements.

The focus of Operator Self-Verification is on traditional manufacturing operations, and applications can be made wherever traditional inspection is employed. The practices recommended in this document are intended to identify the basic elements and provide a “guideline” for structuring Operator Self-Verification programs within the aerospace industry; applicable to producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines and composite components. Operator Self-Verification programs are applied to improve the overall efficiency and product quality of processes considered mature, as judged by the implementing organization. Operator Self-Verification programs are not stand-alone processes, but augment existing quality management systems.

This standard establishes the requirements for performing and documenting FAI. It is emphasized the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements.

This standard defines the common nonconformance data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract. The process of exchanging, coordinating, and approving nonconformance data varies with the multiple relationships and agreements among all parties concerned. The information provided by this standard forms guidelines for submitting and managing of data through accurate communication. The main objective is to provide the definition of a data set that can be integrated into any form of communication (e.g., electronic data interchange, submission of conventional paper forms).

This standard defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract. Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.

This standard is primarily intended to apply to new parts and products intended to be produced in an on-going production phase, but can also be applied to parts currently in production (e.g., manufacturing, maintenance). The standard is applicable to all production processes that influence the variation of KCs, as well as maintenance and service processes in which KCs are identified. It applies to organizations for assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product. The variation control process begins with product definition, typically stated in the design documentation (e.g., digital model, engineering drawing, specification) which identifies KCs, and leads to a variation management process for those KCs. This process may also be used for producer-identified KCs (e.g., process KCs, additional/substitute product KCs).

This standard is primarily intended to apply to new parts and products, but can also be applied to parts currently in production. The standard shall be applicable to all production processes, that influence the variation of KCs, as well as maintenance processes in which KCs are identified. It applies to assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product. It does not apply to lab-scale, pilot, or pre-production processes. However, particular management of some KCs might be required using other methods than those described in the standard, during these phases of a program, when required by the customer or deemed appropriate by the organization (e.g., Engineering department requirement).

This standard is applicable to AQMS COs listed in the Online Aerospace Supplier Information System (OASIS) database. This standard is intended for the management and resolution of AQMS CO’s major QMS nonconformities. This standard is not intended to address QMS nonconformities classified as minor or nonconformities related to the products or services provided by the CO.

These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier’s activities. It shall be applied to the supplier’s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards. This AS provides the approval process for Auditor Authentication Bodies (AAB), training course providers, trainers and auditors who meet the requirements of AIR5493 and outlines the America’s sector specific process to implement AS9104. This document is created to be in conformance with AS9104.

These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier’s activities. It shall be applied to the supplier’s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards. This AS provides the approval process for Auditor Authentication Bodies (AAB), training course providers, trainers and auditors who meet the requirements of AIR5493 and outlines the America’s sector specific process to implement AS9104. This document is created to be in conformance with AS9104.

This document is intended to prescribe consistent requirements for CSI management for organizations and suppliers who perform work for prime contractors receiving direct contracts from U.S. government agencies (i.e., first-tier or prime suppliers).

Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.