Search Results

Consequently, rise of this technological trend is bringing forth safety and cybersecurity challenges in form of new threats, hazards and vulnerabilities. As per the recent UN vehicle regulation 155, several risk-based security models and assessment frameworks have been proposed to counter the growing cybersecurity issues, however, the high budgetary cost to develop the tool and train personnel along with high risk of leakage of trade secrets, hinders the automotive manufacturers from adapting these third party solutions. ...As per the recent UN vehicle regulation 155, several risk-based security models and assessment frameworks have been proposed to counter the growing cybersecurity issues, however, the high budgetary cost to develop the tool and train personnel along with high risk of leakage of trade secrets, hinders the automotive manufacturers from adapting these third party solutions.

The results of this work is allowed to identify a number of cybersecurity threats of the automated security-critical automotive systems, which reduces the efficiency of operation, road safety and system safety. ...According to the evaluating criterion of board electronics, the presence of poorly-protected communication channels, the 75% of the researched modern vehicles do not meet the minimum requirements of cybersecurity due to the danger of external blocking of vital systems. The revealed vulnerabilities of the security-critical automotive systems lead to the necessity of developing methods for mechanical and electronic protection of the modern vehicle. ...The law of normal distribution of the mid-points of the expert evaluation of the cyber-security of a modern vehicle has been determined. Based on the system approach, ranking of the main cybersecurity treats is performed.

Quotes from COMVEC 2018 Industry leaders spoke extensively about all things autonomous-ADAS, big data, connectivity, cybersecurity, machine learning-at the annual SAE event. Here's some of what they had to say. Fuel-cell Class 8-take 2.0 With a longer-range and more-refined fuel cell-powered heavy-duty truck, Toyota aims to eventually eliminate emissions from trucks serving increasingly congested California ports. ...Editorial Bring innovation, disruption in-house Adding 3D printing to design, manufacturing processes Upstream devoted to truck cybersecurity threats Jacobs employs cylinder deactivation in HD engines to lower CO2, NOx Emissions reductions continue to disrupt CV industry Mercedes doubles down on electric vans and buses, considers fuel cells Off-road bus from Torsus transports to hard-to-reach places Q&A Perkins pursues plug-and-play connectivity

Countering cybersecurity threats against unmanned vehicle systems Cranfield University researchers have developed a monitoring system whose purpose is to monitor mission profile implementation at both high level mission execution and at lower level software code operation to tackle specific threats of malicious code and possible spurious commands received over a vehicle's data links.

Since the early 1990’s, commercial vehicles have suffered from repeated vulnerability exploitations that resulted in a need for improved automotive cybersecurity. This paper outlines the strategies and challenges of implementing an automotive Zero Trust Architecture (ZTA) to secure intra-vehicle networks. ...This research successfully met the four requirements and demonstrated that using ZT principles in an on-vehicle network greatly improved the cybersecurity posture with manageable impact to system performance and deployment.

Innovations in Mobility: Aerospace Digital Summitaerospace mobility leaders convene leverage cutting-edge technology, design, develop safety measures, integrate current regulations, suggest future policies, expand markets, diversify revenue streams.

This specification establishes process controls for the repeatable production of aerospace parts by Electron Beam Powder Bed Fusion (EB-PBF). It is intended to be used for aerospace parts manufactured using additive manufacturing (AM) metal alloys, but usage is not limited to such applications.

This SAE Aerospace Recommended Practice (ARP) provides insights on how to perform a Cost Benefit Analysis (CBA) to determine the Return on Investment (ROI) that would result from implementing a blockchain solution to a new or an existing business process. The word “blockchain” refers to a method of documenting when data transactions occur using a distributed ledger with desired immutable qualities. The scope of the current document is on enterprise blockchain which gives the benefit of standardized cryptography, legal enforceability and regulatory compliance. The document analyzes the complexity involved with this technology, lists some of the different approaches that can be used for conducting a CBA, and differentiates its analysis depending on whether the application uses a public or a private distributed network.

This specification establishes process controls for the repeatable production of aerospace parts by Laser Powder Bed Fusion (L-PBF). It is intended to be used for aerospace parts manufactured using Additive Manufacturing (AM) metal alloys, but usage is not limited to such applications.

As cyber attacks become more frequent at all levels, the commercial aviation industry is gearing up to respond accordingly. Commercial Aviation and Cyber Security: A Critical Intersection is a timely contribution to those responsible for keeping aircraft and infrastructure safe. It covers areas of vital interest such as aircraft communications, next-gen air transportation systems, the impact of the Internet of Things (IoT), regulations, the efforts being developed by the Federal Aviation Administration (FAA), and other regulatory bodies. The book also collects important information on the best practices already adopted by other industries such as utilities, defense and the National Highway Traffic Safety Administration in the US. It equally addresses risk management, response plans to cyber attacks, managing supply chains and their cyber- security flaws, personnel training, and the sharing of information among industry players.

This document applies to the development of Plans for integrating and managing COTS assemblies in electronic equipment and Systems for the commercial, military, and space markets; as well as other ADHP markets that wish to use this document. For purposes of this document, COTS assemblies are viewed as electronic assemblies such as printed wiring assemblies, relays, disk drives, LCD matrices, VME circuit cards, servers, printers, laptop computers, etc. There are many ways to categorize COTS assemblies1, including the following spectrum: At one end of the spectrum are COTS assemblies whose design, internal parts2, materials, configuration control, traceability, reliability, and qualification methods are at least partially controlled, or influenced, by ADHP customers (either individually or collectively). An example at this end of the spectrum is a VME circuit card assembly.

This interface document SAE J2286 revises the requirements for file formats as described in SAE J1924. This document describes Interface 1 (I/F 1) in SAE J2214. This document does not imply the use of a specific hardware interface, but may be used with other hardware interfaces such as SAE J1939. The requirements of SAE J2286 supersede the requirements defined by SAE J1924.

This aerospace standard outlines the minimum requirements for the quality assurance program of a distributor of new aircraft or aerospace parts and material. It is designed to aid in the surveillance and accreditation of a distributor who procures new parts and materials and resells these products to customers or other distributors in the aviation or aerospace industry, i.e., a PASS THROUGH distributor. This standard may be used to determine the adequacy and implementation of the distributor’s quality assurance program.

Finding success on an international track Student members of the University of Missouri's Formula SAE team are learning firsthand that international collaboration is the future of engineering. A vision. A car. A cause. New Mexico State Aggies are tough enough to race pink. CyberAuto Challenge helps close talent gap Having a supply of high-quality young engineers is key to beefing up the automotive industry's cyber defenses.

Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs

AVSC Best Practice for Interactions Between ADS-DVs and Vulnerable Road Users (VRUs) AVSC00009202208 establishes common terminology and a baseline understanding of the challenges posed, and framework to evaluate automated driving system-dedicated vehicle (ADS-DV) interactions with VRUs. This best practice can facilitate communication among the industry and public, help calibrate expectations of all traffic participants, and improve broader acceptance of SAE level 4 and level 5 ADS-equipped vehicles.

This document will address measures pertaining to and directly associated with the maintainability and reliability of FSTDs throughout their entire life cycle, from initial specification and design to de-commissioning. Although the primary emphasis of this document is on full flight simulators (with motion and visual systems), it should be applicable in part or total to all FSTDs.

Taking on the Valeo Innovation Challenge Two Canadian teams-the University of Ottawa and the University of Waterloo-finished in the top 3 among about 1,000 other universities from around the world in this challenge devoted to spurring innovative ideas for transportation. Colorado State University designs fuel-cell plug-in hybrid system Competing in the EcoCAR2 competition using a Chevrolet Malibu, the Colorado State team designed a system that features a 15-kW polymer electrolyte membrane fuel cell system, an 18.9-kW•h/177-kW lithium-ion battery, and a 145-kW motor. Cal State Fullerton combines art and engineering Team's submission on its Formula SAE car won first place in the second annual Generation Auto video contest organized in part by SAE International. Collaborative research project leads to potentially swarming VTOL UAVs The AVIGLE VTOL (vertical takeoff and landing) unmanned aerial vehicle was developed via collaboration by a variety of entities for a variety of applications.