Search Results

Classic vehicle production had limitations in bringing the driving commands to the actuators for vehicle motion (engine, steering and braking). Steering columns, hydraulic tubes or steel cables needed to be placed between the driver and actuator. Change began with the introduction of e-gas systems. Mechanical cables were replaced by thin, electric signal wires. The technical solutions and legal standardizations for addressing the steering and braking systems, were not defined at this time. Today, OEMs are starting E/E-Architecture transformations for manifold reasons and now have the chance to remove the long hydraulic tubes for braking and the solid metal columns used for steering. X-by-wire is the way forward and allows for higher Autonomous Driving (AD) levels for automated driving vehicles. This offers new opportunities to design the vehicle in-cabin space. This paper will start with the introduction of x-by-wire technologies.

The flexible data rate capability in CAN (commonly called CAN FD) is implemented as a transport layer in order to allow for functional safety, cybersecurity, extended transport capability, and backward compatibility with SAE J1939DA.

Quotes from COMVEC 2018 Industry leaders spoke extensively about all things autonomous-ADAS, big data, connectivity, cybersecurity, machine learning-at the annual SAE event. Here's some of what they had to say. Fuel-cell Class 8-take 2.0 With a longer-range and more-refined fuel cell-powered heavy-duty truck, Toyota aims to eventually eliminate emissions from trucks serving increasingly congested California ports. ...Editorial Bring innovation, disruption in-house Adding 3D printing to design, manufacturing processes Upstream devoted to truck cybersecurity threats Jacobs employs cylinder deactivation in HD engines to lower CO2, NOx Emissions reductions continue to disrupt CV industry Mercedes doubles down on electric vans and buses, considers fuel cells Off-road bus from Torsus transports to hard-to-reach places Q&A Perkins pursues plug-and-play connectivity

Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will drive vehicle development in the near future, say industry experts attending the revamped SAE COMVEC 17 event.

Defending the heavy-vehicle cyber domain Cybersecurity experts explained at SAE COMVEC 2021 how they're preparing the next generation of thwarters to protect increasingly electrified, connected and automated trucks.

From hydrogen-fueled buses to AI-driven advancements and cybersecurity, this book offers an unparalleled glimpse into the future of transit. Navigate the complexities of transit planning in a post-COVID world, where innovative solutions are essential to tackle infrastructure challenges and workforce shortages.

Using a wireless medium for tractor-trailer communication will bring new cybersecurity challenges and requirements which requires new development and lifecycle considerations.

Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will largely drive vehicle developments in the coming years, according to experts presenting at the revamped SAE COMVEC 17.

The flexible data rate capability in CAN (commonly called CAN FD) is implemented as a transport layer in order to allow for functional safety, cybersecurity, extended transport capability, and backward compatibility with SAE J1939DA.

The flexible data rate capability in CAN (commonly called CAN FD) is implemented as a transport layer in order to allow for functional safety, cybersecurity, extended transport capability, and backward compatibility with SAE J1939DA.

Access mechanisms to system data and/or control is a primary use case of the hardware protected security environment (hardware protected security environment) during different uses and stages of the system. The hardware protected security environment acts as a gatekeeper for these use cases and not necessarily as the executor of the function. This section is a generalization of such use cases in an attempt to extract common requirements for the hardware protected security environment that enable it to be a gatekeeper. Examples are: Creating a new key fob Re-flashing ECU firmware Reading/exporting PII out of the ECU Using a subscription-based feature Performing some service on an ECU Transferring ownership of the vehicle Some of these examples are discussed later in this section and some have detailed sections of their own. This list is by no means comprehensive.

AVSC Information Report for Change Risk Management AVSC00010202304 provides a process for change risk management for fleet-operated ADS-DVs using level 4 or 5 automation. The document addresses risks resulting from planned and unplanned changes in an ADS-DV design and/or operation. This information report is based on the concept of risk-informed decision-making. Making risk management decisions such as safety and change management, safety analysis, and safety assurance are especially applicable when moving from concept to production intent for the ADS-DV. Change Risk Management (CRM) does not replace best practices or other methods for managing safety anomalies or change management processes. It may instead be viewed as an additional resource that elaborates on how safety anomaly management and change management can be performed.

Advancing toward driverless cars Autonomous-driving technology is set to revolutionize the auto industry. But getting to a true "driverless" future will be an iterative process based on merging numerous individual innovations. Overcoming the challenges of HCCI combustion Homogenous-charge compression ignition (HCCI) holds considerable promise to unlock new IC-engine efficiencies. But HCCI's advantages bring engineering obstacles, particularly emissions control. Simulation for tractor cabin vibroacoustic optimization Method of identifying and stopping an electronically controlled diesel engine in runaway mode Electrification not a one-size-fits-all solution Efforts in the off-highway industry have been under way for decades, but electrification technology still faces implementation challenges. 700 miles, hands-free! GM's Super Cruise turns Cadillac drivers into passengers in a well-engineered first step toward greater vehicle autonomy.

Making sense of autonomy Industry offers a range of sensors that will free humans from many tasks while also improving reliability, though devising strategies that meet demanding requirements without breaking the bank is no easy challenge. Life-cycle planning-Design and calibration for ultimate efficiency The ultimate power of Big Data technologies relies on the implementation of new strategies. Unlike a traditional engine calibration process, in which only calibration test data and model simulation data are used, multiple source data introduced into the adaptive engine calibration process contributes to efficiency and cost reduction. The complicated future of off-highway engines Developing an optimum engine is getting tricky now that the European Union has established a Stage V for off-highway engines, and the U.S. has not. What effect will this have on future engine designs?

Deere advances in-field autonomy While stereo cameras and computer vision guide Deere's "limited- release" 8R autonomous tractor, Bear Flag's lidar tech will augment future machines. Positioning to centimeter-level improves agriculture Precision-navigation approaches that emphasize backward compatibility help farms reap more value from autonomous operations. Funding, mandates fuel commercial-vehicle electrification Legislators provide the impetus to electrify trucks and buses, leading to several engineering challenges.

The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.

Hyliion shifts focus from propulsion to power generation Prime power and EV charging are two areas that can benefit from the Karno linear generator beginning later this year. Intensifying pursuit of autonomous trucks Daimler Truck and Torc have established a clear roadmap that brings SAE level 4 trucks to the U.S. market by 2027. Commercial-truck EV fleets slow to grow Even for the largest players, the underdeveloped charging ecosystem is hampering commercial-truck fleets' electrification efforts.

Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.

Headliners from Las Vegas Big reveals abounded at the triennial CONEXPO trade show. Following are some of the most notable unveilings from the desert. Cat doubles down on diesel with new C13D platform Deere pursues electric construction machines and charging infrastructure JCB debuts clean-sheet hydrogen combustion engine Volvo CE unveils electric asphalt compactor, announces NA arrival of L350H loader Honda reveals next-gen Autonomous Work Vehicle Deere 3D-prints fuel valves for tractors HP's binder jetting technology and GKN's manufacturing expertise helped John Deere realize its first 3D-printed metal part for mass production. Returning to the SAE presidency for 2023 Setting a "prudently aggressive" mindset in advancing SAE's goals in the mobility ecosystem.

Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.