Search Results

A significant milestone in advancing cybersecurity within the automotive industry is the release of the first international standard for automotive cybersecurity ISO/SAE 21434:2021 ‘Road Vehicles — Cybersecurity Engineering’. A recently published type approval regulation for automotive cybersecurity (UN R155) is also tailored for member countries of the UNECE WP.29 alliance. ...Thus, the challenges for embedded automotive systems engineers are increasing while frameworks, tools and shared concepts for cybersecurity engineering and training are scarce. Hence, cybersecurity training in the automotive domain necessitates an understanding of domain-specific intricacies and the unique challenges at the intersection of cybersecurity and embedded systems engineering, elevating the need for improving the skill set and knowledge of automotive cybersecurity engineers. ...Hence, cybersecurity training in the automotive domain necessitates an understanding of domain-specific intricacies and the unique challenges at the intersection of cybersecurity and embedded systems engineering, elevating the need for improving the skill set and knowledge of automotive cybersecurity engineers. This paper delves into an automotive cybersecurity training concept aimed at enhancing the proficiency of development engineers.

Here, we discuss the On-Board Diagnostic (OBD) regulations for next generation BEV/HEV, its vulnerabilities and cybersecurity threats that come with hacking. We propose three cybersecurity attack detection and defense methods: Cyber-Attack detection algorithm, Time-Based CAN Intrusion Detection Method and, Feistel Cipher Block Method. ...These control methods autonomously diagnose a cybersecurity problem in a vehicle’s onboard system using an OBD interface, such as OBD-II when a fault caused by a cyberattack is detected, All of this is achieved in an internal communication network structure.

The lack of inherent security controls makes traditional Controller Area Network (CAN) buses vulnerable to Machine-In-The-Middle (MitM) cybersecurity attacks. Conventional vehicular MitM attacks involve tampering with the hardware to directly manipulate CAN bus traffic.

In this paper, we outline past, present and future applications of automotive security for engine ECUs. Electronic immobilizers and anti-tuning countermeasures have been used for several years. Recently, OEMs and suppliers are facing more and more powerful attackers, and as a result, have introduced stronger countermeasures based on hardware security. Finally, with the advent of connected cars, it is expected that many things that currently require a physical connection will be done remotely in a near future. This includes remote diagnostics, reprogramming and engine calibration.

This exercise confirms the necessity of a more restrictive cybersecurity posture in automotive peripherals with access to critical systems, in particular VDAs, and especially when such peripherals present a wireless interface.

With the increasing connectivity and complexity of modern automobiles, cybersecurity has become one of the most important properties of a vehicle. Various strategies have been proposed to enhance automotive cybersecurity. ...Various strategies have been proposed to enhance automotive cybersecurity. Digital twin (DT), regarded as one of the top 10 strategic technology trends by Gartner in 2018 and 2019, establishes digital representations in a virtual world and raises new ideas to benefit real-life objects. ...In this paper, we explored the possibility of using digital twin technology to improve automotive cybersecurity. We designed two kinds of digital twin models, named mirror DT and autonomous DT, and corresponding environments to support cybersecurity design, development, and maintenance in an auto’s lifecycle, as well as technique training.

The VCE Laboratory testbeds are connected with an Amazon Web Services (AWS) cloud-based Cyber-security Labs as a Service (CLaaS) system, which allows students and researchers to access the testbeds from any place that has a secure internet connection. ...VCE students are assigned predefined virtual machines to perform designated cyber-security experiments. The CLaaS system has low administrative overhead associated with experiment setup and management. ...VCE Laboratory CLaaS experiments have been developed for demonstrating man-in-the-middle cyber-security attacks from actual compromised hardware or software connected with the TestCube.

The scope of the document is to define the cyber-security best practices to reduce interference with normal vehicle operation, or to minimize risk as to unauthorized access of the vehicle's control, diagnostic, or data storage system; access by equipment (i.e., permanently or semi-permanently installed diagnostic communication device, also known as dongle, etc.) which is either permanently or semi-permanently connected to the vehicle's OBD diagnostic connector, either SAE J1939-13, SAE J1962, or other future protocol; or hardwired directly to the in-vehicle network.

Legacy electronic control units are, nowadays, required to implement cybersecurity measures, but they often do not have all the elements that are necessary to realize industry-standard cybersecurity controls. ...Legacy electronic control units are, nowadays, required to implement cybersecurity measures, but they often do not have all the elements that are necessary to realize industry-standard cybersecurity controls. For example, they may not have hardware cryptographic accelerators, segregated areas of memory for storing keys, or one-time programmable memory areas. ...While the UDS service $27 (Security Access) has a reputation for poor cybersecurity, there is nothing inherent in the way it operates which prevents a secure access-control from being implemented.

OBD, J1939 and UDS on CAN / IP), and a glimpse into the near future covering remote, cloud-based diagnostics and cybersecurity threats.

Countering cybersecurity threats against unmanned vehicle systems Cranfield University researchers have developed a monitoring system whose purpose is to monitor mission profile implementation at both high level mission execution and at lower level software code operation to tackle specific threats of malicious code and possible spurious commands received over a vehicle's data links.

Since the early 1990’s, commercial vehicles have suffered from repeated vulnerability exploitations that resulted in a need for improved automotive cybersecurity. This paper outlines the strategies and challenges of implementing an automotive Zero Trust Architecture (ZTA) to secure intra-vehicle networks. ...This research successfully met the four requirements and demonstrated that using ZT principles in an on-vehicle network greatly improved the cybersecurity posture with manageable impact to system performance and deployment.

The paper includes a description of cybersecurity measures to protect the vehicle against malicious attacks.

In addition, due to the cyber-security risk, the security functions to ensure the integrity of the message has to be considered.

October 29-31, 2019 │ Novi, MI

October 29-31, 2019 │ Novi, MI

October 29-31, 2019 │ Novi, MI

If you are not able to attend WCX 2022 in-person, you will have the opportunity to join a selected number of live technical and executive discussions online that will advance your skill set in propulsion, connectivity security and safety as well as the business of technology.

Count on SAE International®—the global leader in technical learning for mobility professionals—to deliver emerging research, consumer metrics, regulatory standards and the latest innovations to advance mobility at the WCX World Congress event.