Search Results

These nanostructures of 1D, such as nanowires, nanotubes and nanorods, present great potential for enhancing photon absorption, electron transit, and electron collection in solar cells. Graphene is a 2D hexagonal lattice of carbon atoms that is atomically thin. The remarkable mechanical properties of graphene are due to its structure, in which each carbon atom shares three of its four electrons in covalent bonds with its nearest neighbours (sp2 bonds). ...The remarkable mechanical properties of graphene are due to its structure, in which each carbon atom shares three of its four electrons in covalent bonds with its nearest neighbours (sp2 bonds). ...At the same time, the remaining fourth electrons are delocalized across the two-dimensional lattice in an orbital that accounts for the majority of the material’s optoelectronic capabilities. Also, Graphene is noted for having mobility that exceeds that of good metals. Furthermore, since a number of solution-based techniques, such as simple spin coating, may be used to create thin films of graphene a range of compositions can be created utilising low-cost, straightforward, and large-scale processes.

The homogeneous Cu and oxidized graphene (GO) were detected. The weight percent of carbon (C) and oxygen (O) on the graphene surface was 59.82% and 40.18%, respectively. ...Copper (Cu) tape and graphene filament were employed for the antenna patch component due to their benefits. The comprehensive comparative analysis between a full-wave model and a 3D-printed prototype of the antenna via the CST Microwave Studio program was demonstrated here. ...The GO (011) peak was seen in the XRD spectra of the graphene sheet. The simulation and measurement comparisons are quite satisfactory. The antennas, produced using a conventional 3D printer, will be beneficial for various applications in aeronautics and astronautics.

This work aims to develop a PA6 nanocomposite with glass fiber (GF) and graphene nanoplatelets (GNPs) focusing on automotive parts application. Polyamide 6 is a semi-crystalline polymer that exhibits high fatigue and flexural strength, making it viable for rigorous applications. ...Among the fillers of nanocomposites are graphene nanoplatelets, which stand out in nanocomposites due to their easy and safe inclusion in polymer matrices, as can be seen in recent studies on the toxicity of GNPs, where it was found that graphene is much safer than carbon black for large-scale use, this being a positive point regarding the application of GNPs. ...Among the fillers of nanocomposites are graphene nanoplatelets, which stand out in nanocomposites due to their easy and safe inclusion in polymer matrices, as can be seen in recent studies on the toxicity of GNPs, where it was found that graphene is much safer than carbon black for large-scale use, this being a positive point regarding the application of GNPs.

We have previously shown that plasma-enhanced chemical vapor deposition (PECVD) of graphene on gold (Au) and silver (Ag) terminals can significantly reduce the insertion force (friction force during the terminal insertion process). ...In this study, reduced graphene oxide was prepared using a low-cost solution process and applied onto metallic terminals. ...The reduced graphene oxide (rGO) suspended in polyalphaolefin (PAO) base oil was coated on Sn terminals via a dip-coating method.

The carbon atoms recombine into graphene sheets in the hydrogen atmosphere.

In this study, the primary objective is to investigate the effects of Graphene nanoparticles (GNPs) in AA7075 material and the effect of FSP graphene NPs on the forming limit curve of the TWBs through experiments.

The present investigation deals with microstructural and mechanical properties of Pure Aluminum Graphene Nano platelets (GNP’s) composites. The contents of GNP’s varied from 2.5 to 4.5 wt. % in pure aluminium matrix.

Some of the micro- and nano-particles used are natural fibers (like cellulose, fir, palm), silica, clay, graphene and derivatives, zeolite, and others. This review is an overview of recent advances in the incorporation of fillers in PU foams and the influence they have on the sound absorption capacity of the foams.

FTIR studies have confirmed the presence of -C=C at wavenumber of 1652 cm-1 and demonstrates the formation of graphene. It was observed that the quality of exfoliated graphite and yield were improved from the present method of processing of graphene nanosheets. ...It was observed that the quality of exfoliated graphite and yield were improved from the present method of processing of graphene nanosheets. Further, the process time is less when compared with existing conventional methods.

High Temperature Graphene-Peek Adhesive Compounding graphene into polymers has the potential to improve various material properties, even at very low concentrations.

Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power.

In this article, the dependence of the soot oxidation rate upon nanostructure, namely the length, separation distance and curvature of the graphene segments is shown. Soots possessing graphitic, fullerenic or amorphous nanostructure are used for this comparison.

The cell is provided with different coatings of carbon, graphene, and silicone, used in turn, to dissipate the heat generated during the operation in natural convection.

. • An overview on the classifications of composites used in aerospace industry, ranging from conventional glass- fiber reinforced composites to advanced graphene nanocomposites. • The recent work on computational material engineering on aerospace composite materials, including fundamental computational frame work and case studies on the modeling of materials and processes

Empowering Soldiers Through ISPDS Dispensable Gels vs Gap Filler Pads An Analysis of Thermal Management Materials Electronic Warfare Vying for Control of the Electromagnetic Spectrum More Bang for the Buck A New Design and Manufacturing Method for Deep Penetrating Bomb Cases A Comprehensive Way to Use Bonding to Improve RF Performance of Low Noise Amplifiers Army and Universities Deploy New Warfighter Communication Technology Radiation Effects on Electronics in Aligned Carbon Nanotube Technology (RadCNT) Characterizing the fundamental mechanisms and charge transport phenomena governing the interactions between ionizing and non-ionizing radiation with carbon-based (nanotube and graphene) field-effect transistors (FETs) devices and integrated circuits (ICs). An Ultrafast Testbed for Comprehensive Characterization of Photonics, Electronic, and Optoelectronic Properties of Integrated Nanophotonic Structures High-speed testing technology will enable advances such as new digital signal processing/computing platforms in the optical domain through the development of innovative high-speed and low-power nonlinear optical processing cores that can be co-integrated with digital signal processors to enable new functionalities.

The main objective of the proposed work was cast A356 alloy reinforced with nano form of 6wt% silicon carbide (SiC) harder particles and 3wt% self-lubricant graphene (Gr) was used to fabricated a surface nano hybrid composite through FSP technique. SP route was performed on the FSP-ed samples with optimal parametric conditions for obtaining improved mechanical performances.

Building on this promising fluid, we explored further improvements by adding three nanoscale additives: Nano-graphite (GHT), zinc oxide (ZnO), and reduced graphene oxide (RGRO) at different weight percentages (0.06%, 0.08%, 0.1%, and 0.3%). Comparative tests using a four-ball wear tester revealed that the fluid with 0.08% nano-GHT performed the best, boasting a CFN of 0.039, surpassing both the unmodified fluid and conventional commercial cutting fluids (CMCFs).

SAE EDGE Research Reports provide examinations significant topics facing mobility industry today including Connected Automated Vehicle Technologies Electrification Advanced Manufacturing

Oil debris monitoring in aero engines In a gas turbine engine, small particles or "chips" are generated at the point of wear, serving as an advanced warning that catastrophic failure will occur if the wear is not addressed. Health monitoring systems, such as oil debris monitoring, are used to find these small particles so that the wear can be resolved before it's too late. Indigenous powertrain development Customer needs and expectations on drivability, fuel economy, and safety has pushed Indian and multinational OEMs to think about the development of powertrains and gearboxes for local needs with global standards. The next wave of crash simulation As computing speed has improved and software itself has made significant speed and performance gains with each release, modeling tools are now quick enough to build high-quality, large, high-detail vehicle models in a very efficient manner.

The past few decades have seen an explosive increase in our ability to create nanostructures and nanosystems with a great degree of control, using a diversity of techniques. This ability has been accompanied by a similar enhancement in our ability to characterize structures and systems at the nanoscale. Nanotechnology: A Crash Course provides a broad overview of those nanostructures and nanosystems (together termed "Nanotechnology"). It covers structural characteristics and properties of nanostructures, nanofabrication techniques, methods for characterizing nanostructures, and applications for nanomaterials. The book also provides a thought-provoking assessment of the possible implications of nanotechnology in society, and likely future trends.