Search Results

For many industrial tasks (push, pull, lift, carry, etc.), restrictions on grip locations and visibility constrain the hand and head positions and help to define feasible postures. In contrast, foot locations are often minimally constrained and an ergonomics analyst can choose several different stances in selecting a posture to analyze. Also, because stance can be a critical determinant of a biomechanical assessment of the work posture, the lack of a valid method for placing the feet of a manikin with respect to the task compromises the accuracy of the analysis. To address this issue, foot locations and orientations were captured in a laboratory study of sagittal plane and asymmetric manual load transfers. A pilot study with four volunteers of varying anthropometry approached a load located on one of three shelves and transferred the load to one of six shelves.

Digital human models have recently gained widespread use in the area of workplace design and evaluation. Additionally, the creation of biomechanical models to describe loading in the human shoulder allows analysis of the impact of performing tasks on the shoulder. Through the integration of these dual technologies, it is possible to evaluate prospective job designs with respect to their influence on the loading of the shoulder. In this paper the methodology of this integration as well as the utility of the finished analysis tool are addressed.

Occupational populations have become increasingly diverse, requiring novel accommodation technologies for inclusive design. Hence, further attention is required to identify potential differences in work perception between workers with varying physical limitations. The major aim of this study was to identify differences in shoulder loading and perception of effort between a control population (C) and populations affected by chronic back pain (LBP) and spinal cord injury (SCI) in one-handed seated transfer tasks to targets. The effects of the injuries, and associated pain, are likely to produce variations in movement patterns, muscle loading and perceived effort.

In many task analyses using digital human figure models, only the terminal or apparently most stressful posture is analyzed. For reaches from a seated position, this is generally the posture with the hand or hands at the target. However, depending on the characteristics of the tasks and the people performing them, analyzing only the terminal posture could be misleading. This possibility was examined using data from a study of the reaching behavior of people with spinal cord injury. Participants performed two-handed forward reaching tasks. These reaches were to three targets located in the sagittal plane. The terminal postures did not differ significantly between those with spinal cord injury and those without. However, motion analysis demonstrated that they employed distinct strategies, particularly in the initial phase of motion.

Workstation design is one of the most essential components of proactive ergonomics, and digital human models have gained increasing popularity in the analysis and design of current and future workstations (Chaffin 2001). Using digital human technology, it is possible to simulate interactions between humans and current or planned workstations, and conduct quantitative ergonomic analyses based on realistic human postures and motions. Motion capture has served as the primary means by which to acquire and visualize human motions in a digital environment. However, motion capture only provides motions for a specific person performing specific tasks. Albeit useful, at best this allows for the analysis of current or mocked-up workstations only. The ability to subsequently modify these motions is required to efficiently evaluate alternative design possibilities and thus improve design layouts.

This study begins the exploration of the relationship between shoulder external moments and perceived exertion levels for submaximal delivery tasks. Twenty subjects were recorded while performing hand load movement tasks to specified targets. After each exertion, subjects were asked to rate the effort required to perform the task. The recorded motion profiles were processed using a biomechanical upper extremity model, from which resultant external shoulder moments were calculated. Average resultant shoulder moments, stratified by exertion level, were also calculated. Several individual subject moment/exertion profiles showed identifiable trends. It was demonstrated that while no strong relationships exist for individual task exertion effort prediction based on resultant shoulder moments, there is a general trend in the overall data sample, as is shown by a high correlation between mean integrated resultant shoulder moment by exertion level and exertion levels.

Although biomechanics models can predict the stress on the musculoskeletal system, they cannot predict how the muscle load associated with exertion is perceived. The short-term goal of the present study was to model the perception of effort in lifting and reaching tasks. The long-term goal is to determine the correlation between objective and subjective measures of effort and use this information to predict fatigue or the risk of injury. Lifting and reaching tasks were performed in seated and standing situations. A cylindrical object and a box were moved with one hand and two hands, respectively, from a home location to shelves distributed in the space around the subject. The shoulder and torso effort required to perform these tasks were rated on a ten point visual analog scale.

Interference between physical objects in the workspace and the moving human body may cause serious problems, including errors in manual operation, physical damage and trauma from the collision, and increased biomechanical stresses due to movement reorganization for avoiding the obstacles. Therefore, a computer algorithm to detect possible collisions and simulate human motions to avoid obstacles will be an important tool for computer-aided ergonomics and optimization of system design in the early stage of a design process. In the present study, we present a method of modifying motions for obstacle avoidance when the object intrudes near the center of the planned motion. We take the motion modification approach, as we believe that for a certain class of obstacle avoidance problems, a person would modify a pre-planned motion that would result in a collision to a new one that is collision-free, as opposed to organizing a totally unique motion pattern.

This paper describes and illustrates two different approaches used to predict population strength capabilities. One approach uses statistical regression models to predict maximum acceptable weight or force capabilities as a function of population attributes (e.g., anthropometry, gender and standardized strength scores). A second approach relies on a biomechanical concept stating that the maximum force one can produce in a given posture and for a given type of exertion is a function of the minimum relative strength produced by one's muscles at a particular joint. This latter approach has resulted in a specific static strength prediction model which has been implemented in software produced by the Center for Ergonomics at the University of Michigan. The software allows the simulation of a large variety of manual exertions. This paper describes the status of the two different approaches and implications and requirements for future human simulation and modeling systems.

The development of the Translations Energy Criteria (TEC) has been underway for the last fifteen years. This criteria addresses brain contusion and skull fracture in the Anterior-Posterior (A-P), Left-Right (L-R), and Superior-Inferior (S-I) directions. The object of this strudy was to evaluate the ability of the TEC to predict non-fracture type injuries to the brain in the L-R and A-P directions up to the level of “serious.” Six unembalmed human cadavers were subjected to one head impact each. Tests one through three were frontal impacts, performed at 1.6, 3.9 and 6.7 m/s respectively. Tests four through six were lateral impacts, performed at 1.9, 3.8 and 6.1 m/s respectively. The impactor weighed 9.05 kg and was fitted with either a rigid or padded surface. The brain was repressurized and the head instrumented with two tri-axial linear accelerometer arrays and one angular velocity transducer. Two high speed motion picture views (1000 frames per second) were taken for each test.

The objective of the study was to investigate the biomechanical response of the intact cranium. Unembalmed human cadavers were used in the study. The specimens were transected at the base of the skull leaving the intracranial contents intact; x-ray and computed tomography (CT) scans were obtained. They were fixed in a specially designed frame at the auditory meatus level and placed on the platform of an electrohydraulic testing device via a six-axis load cell. Following radiography, quasistatic loading to failure was applied to one of the following sites: frontal, vertex, parietal, temporal, or occipital. Retroreflective targets were placed in two mutually orthogonal planes to record the localized temporal kinematics. Applied load and piston displacement, and the output generalized force (and moment) histories were recorded using a modular digital data acquisition system. After the test, x-ray and CT images were obtained, and defleshing was done.

Head injury is a serious threat to lives of people working around farm machinery. The consequence of head injuries are costly, paralytic, and often fatal. Clinical and biomechanical data on head injuries are reviewed and their application in the analysis of head injury risk associated with farm tractor discussed. A significant proportion of tractor-related injuries and deaths to adults, as well as children, is due directly or indirectly to head injury. An improved injury reporting program and biomechanical studies of human response to tractor rollover, runover, and falls, are needed to understand mechanisms of the associated head injury.

In the last twelve years, the overwhelming effectiveness of restraining children in the United States, Canada and Europe has been proven in reducing death and injury in automobile accidents. Despite the proven benefits of restraining children, one type of injury has not been prevented. This paper is an analysis of stretch injuries to the spinal cord in the upper thoracic or cervical spine. This paper discusses, in general, spinal cord injuries from a biomechanical point of view. The relationship between various loading conditions and the resulting types of spinal cord injuries is discussed. This paper also examines seven real world automobile accidents. Information for each case includes: vehicles involved, type of roadway, crash Delta-V, occupant direction of motion, restraint type, injuries to occupants, and anthropometry of child with spinal cord injury. A description and location of each spinal cord injury that occurred at the time of the accident is discussed.

As an aid to designing an abdominal insert for anthropomorphic dummies, a study of abdominal trauma factors has been made. Questions regarding human impact response and tolerance were answered within the framework of primate scaling. Results of subhuman primate impacts and primate anthropometry were combined to produce injury criteria for frontal and lateral abdominal impacts. Impact response for the frontal and lateral directions was also defined for humans. The primate impact data used in the study was obtained in the early 1970's in laboratory tests utilizing a specially designed “air gun”. This test set up emphasizes reproducibility and control. Human lateral abdominal impact data first published by Walfisch et al., in 1980 were reanalyzed and used to check the primate scaling. Significant differences in impact injury tolerances for various abdominal locations were noted and detailed.

In a crash, impact against the steering assembly can be a major cause of serious and fatal injury to drivers. But the interrelationship between injury protection and factors of surface area, configuration, padding, relative position of the spokes, and number and stiffness of spokes and rim is not clear. This paper reports a series of high-G sled tests conducted with anesthetized animal subjects in 30 mph impacts at 30 G peaks. A total of eight tests were conducted, five utilizing pig subjects, one a female chimpanzee, one an anthropomorphic dummy, and one test with no subject. Instrumentation included closed circuit TV, a tri-axial load cell mounted between the steering wheel and column, seat belt load measurement, six Photo-Sonics 1000 fps motion picture cameras, and poloroid photography. Medical monitoring pre, during and post-impact was followed by gross and microscopic tissue examination.

This paper presents an analysis of 67 neck injuries incurred in diving and sliding accidents in swimming pools. The accidents were investigated to establish the appropriate medical and mechanical factors involved. A mathematical model was developed to allow the prediction of the trajectory and velocity of the subjects prior to their injury. Nine of the accidents were selected for real life simulation. The simulation included the selection of test subjects of similar physical build to the accident victims who then performed the maneuvers leading to the injury, but in deeper water. High speed movies (200 frames per second) were taken, above and below the water, to measure the motion. A frame by frame analysis provided data to determine the trajectory and velocity profiles of the test subject. The maneuvers studied included diving from the pool edge, diving from various board types and sliding down various sliding board configurations.

Business and executive aviation represent a combined total of over 40% of the general aviation fleet, but (1977) accounted for only 8.37% of all general aviation accidents recorded. During the period 1964-1977 some 7,351 aircraft engaged in business flying, and 883 in corporate/executive operations, were involved in accidents reported by the NTSB. These accidents were reviewed utilizing the University of Michigan Computerized Accident Files to provide an overall view of the incidence and nature of business/executive aircraft accidents relative to occupant crash injuries. In addition more detailed case studies of selected accidents investigated including a Lear Jet 25B, Cessna 421, Beech Volpar Model 18, and Ted Smith Aerostar 601, are provided to illustrate specific types of crashworthiness, occupant protection, or post-crash emergency egress findings applicable to business/executive operations. Post-crash fire was reported in 29 cases (16.3%) during the 3-year period (1975-1977).

Detailed investigations of automobile crashes in which children under 10 years old were passengers were carried out. The purpose of this study was to investigate the injury patterns of restrained and unrestrained children and to assess the performance of child restraint systems in real world crashes. Crashes which occurred mainly in Washtenaw and Oakland counties of the state of Michigan were surveyed. A total of 348 vehicle crashes involving 494 children less than 10 years old were identified. Forty eight crashes involving 63 children were selected for in-depth investigation. 37% of the children in the investigated cases were restrained by an adult lap belt or a child restraint. It was found that only 4.7% of the children in the overall sample were restrained. Both adult seat belts and child restraints (when used) were found to be effective in reducing injuries in crashes. Head and facial injuries were found to be the most common form of injury to children.

Statistics indicate that during the past decade (1967-1976) the number of general aviation aircraft involved in an accident is equivalent to at least 38% of the total U.S. production during that period. Estimates that an aircraft will be involved in an accident over a 20 year life range are as high as 60-70%. Recognition of this probability has led to crashworthiness and occupant survivability “packaging” design concepts as offering the most realistic approach to reduction of serious and fatal injuries when an accident occurs. This paper reviews and illustrates current general aviation aircraft accident experience relative to occupant impact injury and damage indexes, and provides new data relative to current-generation aircraft.

A study of free-fall accidents and resulting injuries was conducted to determine how useful these types of data could be in establishing human injury tolerance limits. “Tolerance” was examined primarily for children at two levels - reversible injury and threat to survival. The specific objectives were to investigate specific free-falls in sufficient depth to permit biomedical or mathematical reconstruction of the fall, simulate selected free-falls to estimate impact response, and compare predicted responses with observed injuries as a means of estimating human tolerance levels. From more than 2100 reported free-falls, 110 were investigated on-site. Seven head-first and three feet-first falls were then simulated using the MVMA 2-D Crash Victim Simulator. Newspaper reports of free-falls showed that males fell six times as often as females and most often while at work. Children fell from windows and balconies more often than from any other hazard.