Search Results

The Large Omnidirectional Child (LODC) developed by the National Highway Traffic Safety Administration (NHTSA) has an improved biofidelity over the currently available Hybrid III 10-year-old (HIII-10C) Anthropomorphic Test Device (ATD). The LODC design incorporates enhancements to many body region subassemblies, including a redesigned HIII-10C head with pediatric mass properties, and the neck, which produces head lag with Z-axis rotation at the atlanto-occipital joint, replicating the observations made from human specimens. The LODC also features a flexible thoracic spine, a multi-point thoracic deflection measurement system, skeletal anthropometry that simulates a child's sitting posture, and an abdomen that can measure belt loading directly. This study presents the development and validation of a dynamic nonlinear finite element model of the complete LODC dummy. Based on the three-dimensional CAD model, Hypermesh was used to generate a mesh of the finite element (FE) LODC model.

The Test Device for Human Occupant Restraint (THOR) is an advanced crash test dummy designed for frontal impact. Originally released in a 50th percentile male version (THOR-50M), a female 5th version (THOR-05F) was prototyped in 2017 (Wang et al., 2017) and compared with biofidelity sub-system tests (Wang et al., 2018). The same year, Trosseille et al. (2018) published response corridors using nine 5th percentile female Post Mortem Human Subjects (PMHS) tested in three sled configurations, including both submarining and non-submarining cases. The goal of this paper is to provide an initial evaluation of the THOR-05F biofidelity in a full-scale sled test, by comparing its response with the PMHS corridors published by Trosseille et al. (2018). Significant similarities between PMHS and THOR-05F were observed: as in Trosseille et al. (2018), the THOR-05F did not submarine in configuration 1, and submarined in configurations 2 and 3.

A substantial percentage of serious and fatal injuries sustained by motor vehicle occupants occur in lateral impact collisions, and approximately one third of these injuries involve a far-side occupant. A center airbag, deploying inboard of the front seat occupants, has been integrated into certain vehicles to reduce far-side occupant excursion, to limit occupant interactions with the vehicle interior and/or another occupant, and to reduce occupant loading and injury potential. A series of sled tests was conducted to better understand the efficacy and limitations of a center airbag under a variety of high-speed lateral impact conditions in an environment outside of the production design. A production-level driver’s seat equipped with a seat-mounted center airbag was installed onto an open-air sled. A 50th percentile male SID H-3 was placed in the seat and restrained by a three-point seat belt equipped with retractor and buckle pretensioners.

Field accident data and vehicle crash and sled testing indicate that occupant kinematics, loading, and associated injury risk generally increase with crash severity. Further, these data demonstrate that the use of restraints, such as three-point belts, provides mitigation of kinematics and reduction in loading and injury potential. This study evaluated the role of seat belts in controlling occupant kinematics and reducing occupant loading in moderate severity frontal collisions. Frontal tests with belted and unbelted anthropomorphic test devices (ATDs) in the driver and right front passenger seats were performed at velocity changes (delta-Vs) of approximately 19 kph (12 mph) and 32 kph (20 mph) without airbag deployment. At the lower-moderate severity (19 kph), motion of the belted ATDs was primarily arrested by seat belt engagement, while motion of the unbelted ATDs was primarily arrested by interaction with forward vehicle structures.

Decades after their introduction, seat belts remain the most important safety innovation in automotive history. Seat belt usage remains the single most effective way to minimize the risk of injury or death in severe crash events. Despite having matured, seat belts continue to evolve and improve and are expected to play an equally critical role in future passenger vehicles as increasing automation leads to changes in occupant compartment design and occupant-to-vehicle interaction. In this paper, an overview of major technical milestones in the development of seat belts is presented, ranging from the earliest lap belts to today’s systems that seamlessly synthesize and integrate information from a variety of sensors to prepare the restraints for an imminent crash. A brief overview of contemporary regulatory events is also provided, illustrating how regulatory actions have followed and occasionally driven the development and proliferation of various aspects of occupant restraints.

To improve the biofidelity of the currently available Hybrid III 10-year-old (HIII-10C) Anthropomorphic Test Device (ATD), the National Highway Traffic Safety Administration (NHTSA) has developed the Large Omnidirectional Child (LODC) ATD. The LODC head is a redesigned HIII-10C head with mass properties and modified skin material required to match pediatric biomechanical impact response targets from the literature. A dynamic, nonlinear finite element (FE) model of the LODC head has been developed using the mesh generating tool Hypermesh based on the three-dimensional CAD model. The material data, contact definitions, and initial conditions are defined in LS-PrePost and converted to LS-Dyna solver input format. The aluminum head skull is stiff relative to head flesh material and was thus modeled as a rigid material. For the actual LODC, the head flesh is form fit onto the skull and held in place through contact friction.

Although great progress has been made to improve the safety and performance of autonomous vehicles with the ultimate goal of meeting the public expectation of preventing most accidents, the current fleet of autonomous vehicles being tested continues to demonstrate that we still remain distant from that holy grail. One rationalization for some of these accidents has been that different maneuvers performed by such cars are not human-like (i.e. they do not display certain driving patterns to which human drivers are accustomed to). With that in mind, it would be hard to dispute the need for such vehicles to adapt to and somewhat imitate human driving in order to gradually integrate human-driven traffic in the future.

With growing environmental concerns associated with gas-powered vehicles and busier city streets, micro-mobility modes, including traditional bicycles and new technologies, such as electric scooters (e-scooters), are becoming solutions. In 2018, e-scooter usage overtook other shared micro-mobility modes with over 38 million e-scooter trips taken. Concurrently, the societal concern regarding the safety of these devices is also increasing. To examine the types of injuries associated with e-scooters and bicycles, the National Electronic Injury Surveillance System (NEISS), a probability sample of US hospitals that collects information from emergency room (ER) visits related to consumer products, was utilized. Records from September 2017 to December 2018 were extracted, and those associated with powered scooters were identified. Injury distributions by age, sex, race, treatment, diagnosis, and location on the body were explored.

Females have higher frequency and risk of foot and ankle injuries in motor vehicle collisions than similar-sized males. Therefore, lower extremity biofidelity and accurate injury prediction of female ATDs is critical. This paper aims to compare the THOR 5th percentile female (THOR-05F) anthropomorphic test device (ATD) response with male and female PMHS data of various sizes under ankle inversion and eversion. The THOR-05F lower extremity was subjected to dynamic inversion and eversion ankle loading with a constant 2000N axial force applied through the tibia. Twelve THOR-05F tests (3 inversion and 3 eversion on both, left and right legs) were performed with boundary conditions consistent with previous post-mortem human subject (PMHS) lower extremity tests.

Despite public expectations that autonomous vehicles should be able to avoid most accidents, the existing fleet of autonomous test vehicles has demonstrated this is simply not the case. An explanation for some of these accidents has been that these vehicles do not drive like humans and therefore do not exhibit certain driving patterns expected by human drivers. With the high likelihood of a gradual integration of autonomous vehicles into our traffic system in the future, there will be a need for such vehicles to adapt to, and mimic, human driving. Although much work has been done to understand human behavior and performance in driving, it has been mostly geared towards defining human capabilities and limitations. Little work has been done on the interactions between human-driven and autonomous vehicles.

Certain ankylosing spondyloarthropathies such as ankylosing spondylitis (AS) or diffuse idiopathic skeletal hyperostosis (DISH) can substantially alter clinicopathologic spine biomechanics as well as injury mechanisms in rear-end motor vehicle collisions. AS is an inflammatory disease which can lead to structural impairments of the spine secondary to flowing ossification along the spinal column, including ossification across the spinal discs, facet joints, and ligaments, and it has also been associated with diffuse osteoporosis of the spine. DISH is characterized by excess bone formation along the spinal column, encompassing the annulus and forming the thickest and strongest bridging osteophytes over adjacent vertebral bodies at the level of the disc space. In both conditions the spine is mechanically stiffened and generally more kyphotic than a healthy spine.

Low- to moderate-speed motor vehicle collisions are common roadway occurrences that are generally associated with low rates of reported injury. While such complaints are generally infrequent, claims of injuries resulting from low- to moderate-speed motor vehicle collisions persist. A limited body of literature using quantitative techniques and full-scale crash tests is available to assess the injury potential associated with such collisions. Prior studies have analyzed occupant kinematics and kinetics as well as human injury risk in low- to moderate-speed collisions with older vehicle vintages but do not assess the effects of updated vehicle interior designs and occupant protection devices reflective of efforts to optimize occupant kinematics and reduce occupant loading and injury risk in more modern vehicles.

Over the past decade, there has been an increase in awareness and concern about the occurrence and long-term effects of concussions. Traumatic brain injury (TBI)-related emergency department (ED) visits associated with motor vehicle collisions, including patients with a diagnosis of concussion or mild TBI (mTBI), have increased while deaths and hospital admissions related to TBI have decreased. The diagnostic criteria for concussion have evolved and broadened, and based on current assessments and diagnostic imaging techniques, there are often no objective findings, yet a diagnosis of concussion may still be rendered. Clinical assessment of concussion may be based only on patient-reported symptoms and history, making it difficult to objectively relate the reported increase in TBI-related ED visits due to motor vehicle collisions to specific collision parameters.

National Highway Traffic Safety Administration (NHTSA) has developed an Oblique Offset Moving Deformable Barrier test procedure. For this test procedure to be viable, it must be repeatable within each test facility and it must be reproducible between test facilities. Three tests of a single vehicle model were conducted at three different test facilities, a total of nine tests, to evaluate repeatability and reproducibility. The responses of the vehicle and its occupants were evaluated using three different methodologies to quantify the repeatability within a single test facility and reproducibility among the three test facilities. The first two methods evaluated the time-history of the measured data and the third method only used the peak values. Overall, this test series demonstrated repeatable and reproducible results for the OMDB, vehicle, and driver occupant in the oblique offset test procedure. The method using only the peak values indicates more variability.

Vision plays a key role in the safe and proper operation of vehicles. To safely navigate, drivers constantly scan their environments, which includes attending to the outside environment as well as the inside of the driver compartment. For example, a driver may monitor various instruments and road signage to ensure that they are traveling at an appropriate speed. Although there has been work done on naturalistic driver gaze behavior, little is known about what information drivers glean while driving. Here, we present a methodology that has been used to build a database that seeks to provide a framework to supply answers to various ongoing questions regarding gaze and driver behavior. We discuss the simultaneous recording of eye-tracking, head rotation kinematics, and vehicle dynamics during naturalistic driving in order to examine driver behavior with a particular focus on how this correlates with gaze behavior.

Pedestrian finite element models (PFEM) are used to investigate and predict the injury outcomes from vehicle-pedestrian impact. As postmortem human surrogates (PMHS) differ in anthropometry across subjects, it is believed that the biofidelity of PFEM cannot be properly evaluated by comparing a generic anthropometry model against the specific PMHS test data. Global geometric personalization can scale the PFEM geometry to match the height and weight of a specific PMHS, while local geometric personalization via morphing can modify the PFEM geometry to match specific PMHS anatomy. The goal of the current study was to evaluate the benefit of morphed PFEM compared to globally-scaled and generic PFEM by comparing the kinematics against PMHS test results. The AM50 THUMS PFEM (v4.01) was used as a baseline for anthropometry, and personalized PFEM were created to the anthropometric specifications of two obese PMHS used in a previous pedestrian impact study using a mid-size sedan.

Some rollover testing methodologies require specification of vehicle kinematic parameters including travel speed, vertical velocity, roll rate, and pitch angle, etc. at the initiation of vehicle to ground contact, which have been referred to as touchdown conditions. The complexity of the vehicle, as well as environmental and driving input characteristics make prediction of realistic touchdown conditions for rollover crashes, and moreover, identification of parameter sensitivities of these characteristics, is difficult and expensive without simulation tools. The goal of this study was to study the sensitivity of driver input on touchdown parameters and the risk of rollover in cases of steering-induced soil-tripped rollovers, which are the most prevalent type of rollover crashes. Knowing the range and variation of touchdown parameters and their sensitivities would help in picking realistic parameters for simulating controlled rollover tests.

The National Highway Traffic Safety Administration has performed research investigating the Test Device for Human Occupant Restraint 50th male (THOR-50M) response in Oblique crash tests. This research is being expanded to investigate THOR-50M in the driver position in a 56 km/h frontal impact crash. Hybrid III 5th percentile adult female (AF05) anthropomorphic test devices (ATDs) were used in this testing to evaluate the RibEye Deflection Measurement System. The AF05 ATDs were positioned in the right front passenger and right rear passenger seating positions. For the right front passenger, the New Car Assessment Procedure (NCAP) seating procedure was used, except the seat fore-aft position was set to mid-track. For the right rear passenger, the seating followed the FMVSS No. 214 Side Impact Compliance Test Procedure. The NCAP frontal impact test procedure was followed with additional vehicle instrumentation and pre/post-test measurements.

Recreational Off-Highway Vehicles (ROVs), since their introduction onto the market in the late-1990s, have been related to over 300 fatalities with the majority occurring in vehicle rollover. In recent years several organizations made attempts to improve ROV safety. This paper is intended to evaluate ejection mitigation measures considered by the ROV manufacturers. Evaluated countermeasures include two types of occupant restraints (three and four point) and two structural barriers (torso bar, door with net). The Rollover protection structure (ROPS) provided by the manufacturer was attached to a Dynamic Rollover Test System (DRoTS), and a full factorial series of roll/drop/catch tests was performed. The ROV buck was equipped with two Hybrid III dummies, a 5th percentile female and a 95th percentile male. Additionally, occupant and vehicle kinematics were recorded using optoelectronic stereophotogrammetric camera system.

Multiple laboratory dynamic test methods have been developed to evaluate vehicle crashworthiness in rollover crashes. However, dynamic test methods remove some of the characteristics of actual crashes in order to control testing variables. These simplifications to the test make it difficult to compare laboratory tests to crashes. One dynamic method for evaluating vehicle rollover crashworthiness is the Dynamic Rollover Test System (DRoTS), which simulates translational motion with a moving road surface and constrains the vehicle roll axis to a fixed plane within the laboratory. In this study, five DRoTS vehicle tests were performed and compared to a pair of unconstrained steering-induced rollover tests. The kinematic state of the unconstrained vehicles at the initiation of vehicle-to-ground contact was determined using instrumentation and touchdown parameters were matched in the DRoTS tests.