Search Results

How Electrification and Autonomy Can Unlock the Potential of Unmanned Ground Vehicles VITA 90: Small Form Factors for UAVs and Other Space Constrained Platforms 3D Scanning Provides Key Weapon for Aerospace and Defense Manufacturing New Approach to Viscosity Enables Complex Motions in Soft Robots Ghoul Tool: The Weapon-Mountable Counter UAS Transmitter Autonomous Surveillance Technologies Relating to Dismounted Soldiers The development of the autonomous applications for dismounted Soldier systems is paramount to defeating our adversaries, such as China and Russia, in future combat. A comprehensive literature re-view is necessary to assist in defining the best path forward. Robust MADER: Decentralized Multiagent Drone Trajectory Planner Communication delays can be catastrophic for multiagent systems. However, most existing state-of-the-art multiagent trajectory planners assume perfect communication and therefore lack a strategy to rectify this issue in real-world environments.

What system Designers Should Know About MOSA Standards Microtube Technology A Catalyst for Next-Gen Aerospace Thermal Control Space Industry Test Challenges Advancing Metrology at Mach Speed Drone Mounted Inspection Breaks Barriers for F-35 RF Technology Helps Connect Avionics Systems Using Open-Cavity Plastic Packages in Avionics Applications Electronic Prognostics - A Case Study Using Global Positioning System (GPS) Prognostic health management (PHM) of electronic systems presents challenges traditionally viewed as either insurmountable or not worth the cost of pursuit, but recent changes in weapons platform acquisition and support requirements has spurred renewed interest in electronics PHM, revealing possible applications, accessible data sources, and previously unexplored predictive techniques.

Weaving a new future for composites In a shift perhaps as prolific as steel to aluminum, woven plastics may finally bring the magic of composites to cost-effective mass-production. New composites target EV applications No longer a low-volume play, the latest composite materials offer EV developers new options for lightweighting, thermal management and structures. Acura TLX is Honda's new body-build benchmark All-new for 2021, Acura's midsize sport sedan gets an exclusive platform to go with its structural, materials and dynamic advancements. Body development leader Jeremy Lucas explains. Schaeffler builds an e-motor powerhouse Armed with state-of-the-art manufacturing and a history of innovation, Schaeffler Group is attacking the e-mobility space, says Daniel Sayre.

Heavy-duty engine design What are the most significant factors influencing the way engine developers approach near-term design and development cycles? Two experts provide their insights from recent programs. Reducing winter range loss for electric trucks Researchers at the Austrian Institute of Technology have developed an air exchange system that's capable of reducing heat load by 37% in real-world tests. Narrower focus, bigger payoff Design teams are targeting focused markets for their commercial electric-vehicle programs to combat challenges like range and infrastructure. Removing complexity for autonomous trucks Narrowing the operating domains for driverless commercial vehicles reduces the requirements of autonomous technology and speeds time to market. Plastics innovations 2019 The 49th annual SPE Automotive Awards highlight the ongoing benefits of lightweight polymers and composites.

Connectivity takes center stage Telematic links have become the norm, helping fleet owners and operators improve efficiency and letting OEMs predict component failures. More power, less noise, fewer emissions These key attributes drive development of new generators both big and small. TARDEC pursues advanced power generation U.S. Army, GM collaborate on fuel-cell-generated electricity to power the vehicle's propulsion system and onboard electronics, while providing off-vehicle power via an Exportable Power Take-Off unit. Developing an alternative engine concept Ricardo's CryoPower engine leverages two unique combustion techniques for reduced emissions and fuel consumption-liquid nitrogen and split combustion. Long-haul trucking and stationary power generation will be the first beneficiaries of the technologies. Technology time-warp The road to autonomous driving has been under construction for decades, as showcased by SAE's Mobility History Committee at the 2018 WCX in Detroit.

Leaf turns to the 2020s Nissan's pioneering battery-EV finally gets styling, propulsion and feature upgrades that put it back in the thick of the expanding electric-car race. A rebel's guide to chassis engineering Before the advent of FEA, engineers used their hands to study chassis strength and stiffness. The approach still offers benefits today, notes the man who wrote chassis engineering's "bible." Auto tech comes on strong at CES 2018 The automotive sector showed up at CES with autonomy announcements by the score and a spectrum of new-technology unveilings. New SAE President focused on Big Data Mircea Gradu, senior VP and quality chief at lidar specialist Velodyne, targets data analytics, electrification and connectivity, and STEM initiatives during his 2018 term.

Collaborating on diesel emission control Stringent fuel-efficiency and criteria-pollutant standards call for new combustion strategies. The SwRI-led Advanced Combustion Catalyst and Aftertreatment Technologies consortium reinvents existing technologies and experiments with new catalysts to meet standards. More intelligence equals more efficiency, enhanced functionality Advanced systems require renewed focus on architectures, processors, sensors and networks. Appraising the potential for platooning in the U.S. Researchers from the National Renewable Energy Laboratory perform statistical analysis based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will largely drive vehicle developments in the coming years, according to experts presenting at the revamped SAE COMVEC 17.

Executive Viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Alternative power and connectivity top of mind Using power dense flywheel hybrid technology to cut fuel consumption of OH equipment IoT connections transform manufacturing, vehicle validation Annual Product Guide Supplier Directory Complete listing of industry suppliers categorized by technology area.

Thought leadership at WCX17 Lucid Motors' David Moseley: EV or ICE, "It is all physics" New eye on the road One of the industry's hottest tech suppliers is blazing the autonomy trail by crowd-sourcing safe routes and using AI to learn to negotiate the road. Mobileye's co-founder and CTO explains. Hard, slick and ready to roll A tough, self-renewing catalyst coating developed at Argonne National Laboratory provides unprecedented friction and wear protection for vehicle powertrains, the inventors claim. Sensor ICs, semiconductors and safety To achieve ISO 26262 compliance, engineering practices must be taken to a higher level. The following insights may prove valuable for getting there. New VCR targets 40% BTE Variable-compression ratio with VVA from France's MCE-5.

Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs

All about the engine The University of Wisconsin-Madison team increases engine displacement and implements exhaust gas recirculation to maintain winning ways in SAE Clean Snowmobile Challenge. Fluid mechanics of diesel injection studied at Penn State Special photography method helps student researchers get a better look at spray patterns. Under new management A senior-heavy squad from Minnesota State University, Mankato, takes a different approach to team dynamics and jumps 34 spots to 17th overall at the 2016 Formula SAE Michigan competition.

Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.

Defying the disruptors and driving innovation Four top engineering executives discuss how their "traditional" companies are finding new technology opportunities and business growth amid the start-ups-and are even doing some disrupting themselves. Preparing for a 48-volt revival The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Additive manufacturing enhances GTDI pistons Selective Laser Melting may help manufacture future gasoline-engine pistons with enhanced heat-transfer properties and reduced weight.

Balancing GDI fuel economy and emissions Will OEMs have to adopt gasoline particulate filters to comply with stringent new emissions regulations? Top engineers discuss current developments. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Mixing metals Cadillac pursues aluminum/steel mix for new CT6 luxury sedan, leading to advances in body assembly.

Hydraulics still in control of off-highway needs Engineers continue to master electronic controllers and software to help systems manage engine speeds and boost efficiency, to the ultimate benefit of both OEMs and end-users. Off-highway calibration challenges-big and complex As the final set of Tier 4 regulations kick in for engines greater than 750 hp (560 kW), calibration efforts must contend with complex engine and aftertreatment systems. Engine manufacturers and service providers deal with this complexity, but does it need to be so? DEF delivery modelling for SCR systems Researchers characterize a 0-D model of a urea delivery module, oriented to model-based control and to the simulation of the system response to fault injections finalized to diagnosis validation.

Outlook for autonomous driving includes cloud Connectivity with off-board data and services and among vehicles will be crucial in maintaining safety and security in future autonomous vehicles. The next wave of crash simulation As computing speed has improved and software itself has made significant speed and performance gains with each release, modeling tools are now quick enough to build high-quality, large, high-detail vehicle models in a very efficient manner. SAE 2014 Convergence preview Interest in advanced driver-assistance technologies is surging, with automotive engineers and decision makers at OEMs and suppliers working feverishly on the convenience vs. safety trade-off and other electronics-related challenges. Cooled EGR shows benefits for gasoline engines Exhaust gas recirculation systems now in use on diesel engines are used mainly to meet emissions regulations. In gasoline engines, they are an appealing way to meet ever more stringent fuel-economy standards

QT steels make an impact The use of quenchd and tempered steels for dumper bodies reduces weight and fuel consumption while increasing payload capacity and wear life.

Putting lightweighting to the test Material laws and orientation information are coupled in a single finite element analysis to predict the performance of the hybrid composite beam under a dynamic three point bending load. Screens, cameras provide new look in cabs Video inputs are another option showing up on displays that increasingly offer touch control. Big performance in small packages By regulating light-duty engine variable speed fans based on heat rejection demands and ambient temperature, consistent power savings over the entire operating spectrum can be achieved.

Exhausting Possibilities A novel herringbone design of exhaust catalyst could be the 'Eureka' moment for emissions reductions, says ACAT Global's CEO Joseph W Moch. Ian Adcock tries to unravel the story behind it A right royal performance An interior influenced by the Jubilee celebrations? James Brewer finds out more Virtually, the real deal OEMs want faster time to market, reduced development costs and ever more sophisticated testing. Ian Adcock reports

When real life and FEA meet Model validation becomes the focus for building the chassis of a BAJA SAE vehicle. One student offers his advice for making smart choices while using FEA. Wait...where is Manitoba? Andrew Smith, Executive Vice Chair for the University of Manitoba's SAE International Chapter faces limited resources and the growth of what was once a small team. High hopes or just dreaming? A look at how Asia's aircraft manufacturers are trying to break into new markets to challenge the status quo. Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks.