Search Results

Training / Education

Aircraft Cabin Safety and Interior Crashworthiness

2024-07-23

This two-day course will begin with a discussion of commercial off the shelf (COTS) test requirements.  The instructor will then guide participants through the various cabin interior emergency provisions and their requirements such as supplemental passenger oxygen, emergency equipment, seats, flammability, emergency exits, emergency lighting and escape path markings, and various other cabin interior systems.  

Training / Education

AS9145 Requirements for Advanced Product Quality Planning and Production Part Approval

2024-07-08

This course is verified by Probitas as meeting the AS9104/3A requirements for Continuing Professional Development. Production and continual improvement of safe and reliable products is key in the aviation, space, and defense industries. Customer and regulatory requirements must not only be met, but they are typically expected to exceeded requirements. Due to globalization, the supply chain of this industry has been expanded to countries which were not part of it in the past and has complicated the achievement of requirements compliance and customer satisfaction.

Training / Education

Materials to Electrodes

Anytime

This course provides a deep yet simple explanation of the operational principles of a rechargeable battery. The course spotlights the importance and discusses the fundamentals of the ‘electrochemical cell’ which is the heart of any battery system independent of the storage size. A direct link is set forth between the chemical nature of the cell components and the storage properties of interest such as ‘electromotive force’ and gravimetric & volumetric capacities. Specific attention is directed towards lithium-ion batteries by presenting more details about the materials of choice for the anode/cathode together with their synthesis methods.

Training / Education

Drones for Mapping Accident Reconstruction Sites

Anytime

Participants learn what a drone is and how this tool can aid them in producing an orthomosaic map of an accident scene/location. Participants will learn basic drone safety, operations, and best practices, and will understand how to address airspace basic steps to achieve their Part 107 federal aviation administration (FAA) certification.

Training / Education

Accelerated Test Methods for Ground and Aerospace Vehicle Development

Anytime

Engineers and managers involved with product development are continually challenged to reduce time to market, minimize warranty costs, and increase product quality. This results in less time for testing, which means the need for effective accelerated test procedures has never been greater. Accelerating your testing program sounds great, but how do you begin? This course starts by taking a look at statistical models for reliability testing. It looks specifically at how sample size and testing timeframe affect what you’re able to do versus what you'd ideally do with more time and money.

Training / Education

FEA Beyond Basics: Nonlinear Analysis Web Course RePlay

Anytime

Finite Element Analysis (FEA) has been an indispensable tool for design simulation for several decades but this wide spread use has been limited to simple types of analyses. Relatively recently, more advanced analyses have given easy-to-use interfaces enabling design engineers to simulate problems formerly reserved for analysts. FEA Beyond Basics targets the FEA users who wish to explore those advanced analysis capabilities. It will demonstrate how to move past the ubiquitous linear structural analysis and solve structural nonlinear problems characterized by nonlinear material, large displacements, buckling or nonlinear connectors.

Training / Education

Fundamentals of Fatigue Analysis

Fatigue is a structural failure mode that must be recognized and understood to develop products that meet life cycle durability requirements. In the age of lightweighting, fatigue strength is an important vehicle design requirement as engineers struggle to meet stringent weight constraints without adversely impacting durability. This technical concept course introduces the fatigue failure mode and analysis methods. It explains the physics of material fatigue, including damage accumulation that may progress to product failure over time, and it provides the needed foundation to develop effective fatigue prediction capabilities.

Training / Education

Materials Degradation in Mechanical Design: Wear, Corrosion, Fatigue, and Their Interactions Web Course RePlay

Anytime

Materials degradation from environmental conditions is a common factor that will often occur in mechanical equipment used in every type of environment. These processes can frequently materialize in unpredicted and harmful ways, especially when they interact and lead to early component damage or failure. Captured from five, two-hour sessions, this course summarizes the mechanisms that cause materials and mechanical components to degrade in service through exposure to deleterious mechanical and environmental conditions.

Training / Education

Fluids for Aerospace Hydraulic Systems

This four-hour short course provides an introduction to fluids for aerospace hydraulic systems. Topics covered include an introduction to basics fluid properties, rheology, tribology, and fluid product development. In addition, the history and performance of different classes of fluids are discussed in detail, and specific failure modes such as erosion and sludge formation will be described. Along with an introduction to fluid degradation, information on used oil analysis test methods and interpretation will be provided.

Training / Education

Metals Bundle

Anytime

Almost 75% of all elements are metals. Metals can be classified as either ferrous or non-ferrous and generally conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than other elemental substances. The following six eLearning courses are included in the Materials bundle. Each course is approximately one-hour in duration. See topics/outline for additional details. Introduction to Metals, Ferrous Metals, Nonferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel Exotic Alloys

Training / Education

High Temperature Materials Bundle

Anytime

Metals and alloys have different melting ranges depending on their chemistry. High temperature metals are much harder at room temperature, have exceptionally high melting points (usually above 2000 degree Celsius), and are resistant to wear, corrosion and deformation. The following five eLearning courses are included in the High Temperature Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.

Training / Education

Ferrous Metals Bundle: Steel and Cast Iron

Anytime

Ferrous metals contain iron and are prized for their tensile strength and durability. Most are magnetic and contain a high carbon content which generally makes them, with the exception of wrought iron and stainless steel, vulnerable to rust. The following seven eLearning courses are included in the Ferrous Materials Bundle: Steel and Cast Iron. Each course is approximately one-hour in duration. Modules include: Introduction to Physical Properties, Introduction to Mechanical Properties, Introduction to Metals, Hardness Testing, Ferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel.

Training / Education

Nonferrous Metals Bundle

Anytime

Nonferrous materials are malleable, are non-magnetic, and have no iron content which gives them higher resistance to rust and corrosion. The following five eLearning courses are included in the Nonferrous Metals bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.

Training / Education

Introduction to Materials Bundle

Anytime

The following six eLearning courses are included in the Introduction to Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.

Training / Education

Polymers Bundle

Anytime

This course discusses the properties and applications of thermoplastics, including an overview of the amorphous and semi-crystalline molecular regions found in thermoplastics, and describes common processing methods for thermoplastics, such as injection molding and extruding. Thermosets This course introduces participants to the key characteristics and types of thermosets as well as common processing methods. Courses listed above are available only as part of a TooliingU bundle.  Custom bundles of any five or more ToolingU courses are available upon request as a Corporate Learning Solution.

Training / Education

Adhesives Bundle

Anytime

Manufacturers increasingly rely on adhesives to assemble a variety of products, such as cars, computers, furniture, and toys. An adhesive is a substance used to join two or more materials. Adhesive bonding is the process of placing an adhesive between two surfaces, or substrates, and allowing it to harden, or cure. Structural adhesives are most commonly used in adhesive bonding, since they can easily withstand heavy loads. Epoxies, anaerobics, acrylics, silicones, urethanes, and cyanoacrylates are commonly used structural adhesives. These courses explain the fundamental concepts of adhesive bonding as they apply to product assembly.

Training / Education

The Pillars of Leadership

Anytime

This five-part series focuses on research, CEO interviews and corporate engagements of Jason Jennings and Laurence Houghton. These ideas and valuable practices of successful leaders have been converted to high-impact e-Learning as a “Front Row Seat” for managers and leaders – especially those who have great knowledge and technical ability but have not had the opportunity to learn from the best. Each lesson is filled with tips, stories and activities. Participants will be able to self-assess your leadership strengths and create an action plan for developing yourself and your teams.

Training / Education

Out-Innovate the Competition

Anytime

Well-intentioned leaders, in their attempts to boost innovation, are inadvertently destroying it. Based on Stephen Shapiro’s bestselling book, Best Practices are Stupid: Ways to Out-Innovate the Competition, this online learning experience offers counterintuitive yet proven strategies for boosting innovation and making it a repeatable, sustainable, and profitable process. He teaches that innovation isn't just about generating occasional new ideas; it's about staying consistently one step ahead of the competition.

Training / Education

Doing the Right Things Right

Anytime

Based on the book by bestselling author/award-winning speaker Laura Stack, Doing the Right Things Right: How the Effective Executive Spends Time, this course focuses on to obtain profitable, productive results by managing two critical values: effectiveness and efficiency. Stack describes her 3T Leadership model, 12 practices to enable executives to apply these values, grouped into three areas where leaders spend time: strategic thinking, teamwork, and tactics. Following an assessment of personal productivity practices, learn how to build and apply these practices to situations that require making tough choices about managing time.

Training / Education

Automated Systems for Aerospace and Space Applications

Pressure on costs and budgets makes automating processes within the aerospace and space industries necessary. Misunderstandings about reductions to these complex systems can result in the improper application of these systems, often leading to poor outcomes and project failure. This course introduces the components of automation critical to the practice of acquiring, installing, and maintaining automation. The instructor presents the types, components, operation, application, cost benefits, laws, strengths, and limitations of automation.