Search Results

This SAE Aerospace Standard (AS) provides the general performance, design, installation, test, development, and quality assurance requirements for the flight control related functions of the Vehicle Management Systems (VMS) of military piloted aircraft. It also provides specification guidance for the flight control interfaces with other systems and subsystems of the aircraft.

A semi-active suspension system provides superior safety, ride, and handling performance for a vehicle by continuously varying the damping based on vehicle motions, where semi-active hydraulic damper (SAHD) is the most critical component. Today, SAHD’s are standard in most of the premium segments of vehicles and optional extras in mid-size and compact vehicle segments. Electric vehicles require larger sized SAHD’s to meet heavier vehicle loads and meet ride and handling requirements. The aim of this paper is to highlight the design and development methodology of a base valve for larger bore-size for semi-active hydraulic damper. The workflow follows to present a process for base valve design to meet structural strength and, the key steps of design calculations of the hydraulic performance. The design of the base valve and suction disks architecture was engineered with the aid of Computer Aided simulations.

This SAE Aerospace Recommended Practice (ARP) provides the technical terms and nomenclature, together with their definitions and abbreviations/acronyms that are used in aerospace fluid power, actuation and control systems. NOTE: ARP490 and ARP4493 are sources for definitions specifically for electrohydraulic servovalves.

This SAE Information Report relates to a special class of automotive adaptive equipment which consists of modifications to the power steering system provided as original equipment on personally licensed vehicles. These modifications are generically called “modified effort steering” or “reduced effort power steering.” The purpose of the modification is to alter the amount of driver effort required to steer the vehicle. Retention of reliability, ease of use for physically disabled drivers and maintainability are of primary concern. As an Information Report, the numerical values for performance measurements presented in this report and in the test procedure in the appendices, while based upon the best knowledge available at the time, have not been validated.

This SAE Aerospace Standard (AS) defines the materials, apparatus and procedure for microscopic sizing and counting of particulate contamination of fluid power systems by membrane filtration using microscopic counting.

This Aerospace Information Report provides an overview of published data on different methods for designing electromechanical actuators with a very low probability of jam or disconnect.

This project will create an Aerospace Recommended Practice that provides comprehensive guidelines for the design and specifications for rotary and linear mechanical actuators for use in aircraft mechanically distributed actuation systems including but not limited to flap, slat , cargo door, and weapons bay door actuators.

This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test ensure that the particle retention ability of the filter is measured in a single pass, as no appreciable loading or regression will occur.

The purpose of this SAE Aerospace Recommended Practice (ARP) is to provide a practical definition of external hydraulic fluid leakage exhibited by landing gear shock absorbers/struts. The definition will outline normal (acceptable weepage) and excessive leakage (unacceptable leakage) of shock absorbers/struts that is measurable. The definition of leakage is applicable to new gear assemblies, refurbished/remanufactured (overhauled) shock absorbers/struts, leakage of shock absorbers/struts encountered during acceptance flights, newly delivered and in-service aircraft. This ARP is intended to provide guidelines for acceptable leakage of landing gear shock absorbers/struts between the ambient temperatures of -65 °F (-54 °C) and 130 °F (54 °C) and to outline the procedure for measuring such leakage. The specific limits that are applied to any particular aircraft shall be adjusted by the aircraft manufacturer before inclusion in the applicable maintenance manual.

This document describes hydraulic fluids used in landing gear shock struts with extreme high contact pressure and anti-wear additives that have been added for improved lubrication.

This Aerospace Recommended Practice (ARP) provides general requirements for a generic, integrated rudder and brake pedal unit, incorporating a passive force-feel system that could be used for fixed-wing fly-by wire transport and business aircraft.This ARP addresses the following:- The functions to be implemented- The mechanical interconnection between captain and F/O station- The geometric and mechanical characteristics- The mechanical, electrical, and electronic interfaces- The safety and certification requirements

This AS covers subsonic and supersonic Mach meter instruments which, when connected to sources of static (Ps), and total (Pt), or impact (Pt-Ps), pressure provide indication of Mach number. These instruments are known as Type A. This AS also covers servo-operated repeater or digital display instruments which indicate Mach number when connected to the appropriate electrical output of a Mach transducer of Air Data Computer. These instruments are known as Type B.

This standard covers Airspeed Instruments which display airspeed of an aircraft, as follows:

This AS covers Vertical Velocity Instruments which display the rate of change of pressure altitude of an aircraft, as follows: Type A - Direct reading, self-contained, pressure actuated Type B - Electrically or electronically operated, self-contained, pressure actuated Type C - Electrically or electronically operated, input from a remote pressure sensor

This SAE Aerospace Standard (AS) specifies the general requirements for hydraulic system reservoirs that are installed in commercial and military aircraft and helicopters and also in missile hydraulic systems.This document includes design, test (production and qualification) criteria for various types of reservoirs. Appendix A provides information on hydraulic fluid volume requirements and reservoir sizing.This document also provides a basis for the Procurement Specification to completely define individual reservoir requirements.

This SAE Aerospace Standard (AS) offers gland details for a 0.364 inch (9.246 mm) cross-section gland (nominal 3/8 inch) with proposed gland lengths for compression-type seals with two backup rings over a range of 7 to 21 inches (178 to 533 mm) in diameter. The dash number system used is similar to AS568A. A 600 series has been chosen as a logical extension of AS568A, and the 625 number has been selected for the initial number, since 300 and 400 series in MIL-G-5514 and AS4716 begin with 325 and 425 sizes. Seal configurations and design are not a part of this document. This gland is for use with compression-type seals including, but not limited to, O-rings, T-rings, D-rings, cap seals, etc.

THIS STANDARD ESTABLISHES THE DIMENSIONAL AND VISUAL QUALITY REQUIREMENTS, LOT REQUIREMENTS AND PACKAGING AND LABELING REQUIREMENTS FOR O-RINGS MOLDED FROM AMS7379 FLUOROCARBON (FKM) RUBBER. IT SHALL BE USED FOR PROCUREMENT PURPOSES.