Refine Your Search

Date

Date

Topic

Topic

Author

Author

Body structures Architecture Standard Education and training Automotive

Search Results

Viewing 1 to 20 of 614
123Next >Last >>
Sort by published
Standard

Taxonomy & Definitions for Operational Design Domain (ODD) for Driving Automation Systems
2021-07-15
WIP
J3259
Per SAE J3016 (2021), the Operational Design Domain (ODD) for a driving automation system is defined as “Operating conditions under which a given driving automation system, or feature thereof, is specifically designed to function, including, but not limited to, environmental, geographical, and time-of-day restrictions, and/or the requisite presence or absence of certain traffic or roadway characteristics.”; in short the ODD defines the limits within which the driving automation system is designed to operate, and as such, will only operate when the parameters described within the ODD are satisfied.. This information Report serves to provide terminology, definitions and taxonomy for use in describing an ODD and respective elements for a driving automation system. This classification and definition of a harmonized set of ODD elements is based on the collection and analysis of existing information from multiple sources.
Standard

J2602DA. Digital Annex defining LIN Supplier IDs for ISO 17987
2015-12-10
WIP
J2602DA
This document is a Digital Annex defining LIN Supplier IDs for ISO 17987. New LIN Supplier ID requested will be reviewed by the J2602 Task Force and then the approved IDs will be added to the J2602DA to record Supplier contact details.
Standard

VHDL-AMS Statistical Analysis Packages
2006-10-23
CURRENT
J2748_200610
This document specifies the interface and the behavior of the VHDL-AMS packages for use in modeling statistical behavior. These packages are useful in defining the statistical variation of parameters of electrical, electronic, and mechatronic components and sub-systems. These can then be used with simulation tools to analyze the performance and reliability of systems composed of these components and sub-systems. Providing a standard definition of the package interfaces and their behavior is intended to facilitate the exchange of models between component and system manufacturers and the use of different CAE simulation tools. The SAE statistical package supports the statistical modeling of design parameters subject to tolerances for designs described using the VHDL or VHDL-AMS languages.
Standard

PMODE for In-Vehicle Networks
2001-12-19
CURRENT
J2590_200112
This SAE Recommended Practice describes the power mode requirements for in-vehicle networks that conform to the Automotive Multimedia Interface Collaboration (AMI-C) specifications. These networks include, but are not limited to, the IDB-C (SAE J2366), IDB-1394, and MOST. This version of the document covers primarily IDB-C and may be revised when the PMODE requirements for the other networks are more fully developed by AMI-C.
Standard

Overlap Shear Test for Sealant Adhesive Bonding of Automotive Glass Encapsulating Material to Body Opening
2021-01-07
CURRENT
J1836_202101
This recommended practice defines a procedure for the construction of a lap shear specimen for the purpose of testing the bondability of an automotive sealant adhesive to the elastomeric material used in automotive encapsulating. The present practice of encapsulating automotive glass is described as molding elastomeric material onto the outer edge of the glass using thermoplastic or thermosetting material that quickly sets in the mold. The glass is removed from the mold with cured elastomeric material bonded to the perimeter of thee glass. This encapsulated glass module can now be bonded with a sealant adhesive into the body opening of a vehicle.
Standard

OVERLAP SHEAR TEST FOR SEALANT ADHESIVE BONDING OF AUTOMOTIVE GLASS ENCAPSULATING MATERIAL TO BODY OPENING
1988-10-01
HISTORICAL
J1836_198810
This recommended practice defines a procedure for the construction of a lap shear specimen for the purpose of testing the bondability of an automotive sealant adhesive to the elastomeric material used in automotive encapsulating. The present practice of encapsulating automotive glass is described as molding elastomeric material onto the outer edge of the glass using thermoplastic or thermosetting material that quickly sets in the mold. The glass is removed from the mold with cured elastomeric material bonded to the perimeter of thee glass. This encapsulated glass module can now be bonded with a sealant adhesive into the body opening of a vehicle.
Standard

Survey of Known Protocols
1993-04-01
HISTORICAL
J2056/2_199304
This SAE Information Report is a summary comparison of existing protocols found in manufacturing, automotive, aviation, military, and computer applications which provide background or may be applicable for Class C application. The intent of this report is to present a summary of each protocol, not an evaluation. This is not intended to be a comprehensive review of all applicable protocols. The form for evaluation of a protocol exists in this paper and new protocols can be submitted on this form to the committee for consideration in future revisions of this report. This report contains a table which provides a side-by-side comparison of each protocol considered. The subsequent section provides a more detailed examination of the protocol attributes. Many of the protocols do not specify a method for one or more of the criteria. In these circumstances 'under defined' or 'not specified' will appear under the heading.
Standard

Numbering Systems for End Mills
2019-10-09
CURRENT
J2342_201910
This SAE Recommended Practice provides a systematic method for the identification of End Mills. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designation to prevent specifying cutting tools that cannot be physically or economically manufactured. NOTE 2— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Numbering Systems for End Mills
1999-01-20
HISTORICAL
J2342_199901
This SAE Recommended Practice provides a systematic method for the identification of End Mills. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designation to prevent specifying cutting tools that cannot be physically or economically manufactured. NOTE 2— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

Link Layer
2001-11-27
CURRENT
J2366/2_200111
This SAE Recommended Practice details the Link Layer of the Intelligent Transportation Systems (ITS) Data Bus, which is generally intended for in-vehicle use. The ITS Data Bus (IDB) is a non-proprietary token passing bus, designed to allow disparate consumer, vehicle, and commercial electronic components to communicate and share information across a standard, open data bus. This first version of the IDB is called IDB-C. This Recommended Practice describes the Link Layer of the IDB-C, as shown in Section 1. Below the Link Layer of the IDB-C is the CAN 2.0B Link Layer. The Physical Layer of the IDB-C incorporates the Physical Layer as specified by SAE J2366-1 and J2590. The IDB-C Link Layer is logically divided into two functional sub-layers, viz., Logical Link Control (LLC) and Media Access Control (MAC). However, these are logical groupings that re-use some of the same bits within the CAN 2.0B frame for efficiency.
Standard

ITS Data Bus—Thin Transport Layer
2002-03-20
CURRENT
J2366/4_200203
This SAE Recommended Practice details the Thin Transport Layer of the Intelligent Transportation Systems (ITS) Data Bus, which is generally intended for in-vehicle use. The Thin Transport Layer sits between SAE J2366-2 and J2366-7. It provides the handling of such activities as the packetizing of long messages and message reassembly. Design of the messages and headers has stressed economy, in terms of bits within a CAN 2.0B frame. The ITS Data Bus (IDB) is a non-proprietary virtual token passing bus, designed to allow disparate consumer, vehicle, and commercial electronic components to communicate and share information across a standard, open data bus. This document describes the Thin Transport Layer of the IDB, as shown in Figure 1.
Standard

Combination 11 Conductors and Two Pairs ECBS Cable
2020-02-24
CURRENT
J2742_202002
This SAE standard establishes the minimum construction and performance requirements for a combination cable consisting of 11 conductors and two twisted pairs for use on trucks, trailers, and dollies for 12 VDC nominal applications in conjunction with SAE J2691 (15 pole connectors.) The cable includes both power and unjacketed SAE J1939-15 paired signal circuits along with dual ground wires to accommodate grounding requirements within the constraints of the SAE J2691 terminal capacity.
Standard

Combination 11 Conductors and 2 Pairs ECBS Cable
2018-06-03
HISTORICAL
J2742_201806
This SAE standard establishes the minimum construction and performance requirements for a combination cable consisting of 11 conductors and 2 twisted pairs for use on trucks, trailers, and dollies in conjunction with SAE J2691. (15 pole connectors.) The cable includes both power and unjacketed SAE J1939-15 paired signal circuits along with dual ground wires to accommodate grounding requirements within the constraints of the SAE J2691 terminal capacity.
Standard

Combination 11 Conductors and 4 Pairs ECBS Cable
2013-04-09
HISTORICAL
J2742_201304
This SAE standard establishes the minimum construction and performance requirements for a combination cable consisting of 11 conductors and 4 twisted pairs for use on trucks, trailers, and dollies in conjunction with SAEJ2691. (15 pole connectors.) The cable includes both power and unjacketed SAE J1939-15 paired signal circuits along with dual ground wires to accommodate grounding requirements within the constraints of the SAE J2691 terminal capacity.
Standard

Linear Impact Procedure for Occupant Ejection Protection
2016-04-28
HISTORICAL
J2937_201604
The objective of this document is to enhance the test procedure that is used for ejection mitigation testing per the NHTSA guidelines as mentioned in the FMVSS226 Final Rule document (NHTSA Docket No. NHTSA-2011-0004). The countermeasure for occupant ejection testing is to be tested with an 18kg mass on a guided linear impactor using the featureless headform specifically designed for ejection mitigation testing. SAE does not endorse any particular countermeasure for ejection mitigation testing. However, the document reflects guidelines that should be followed to maintain consistency in the test results. Examples of currently used countermeasures include the Inflatable Curtain airbags and Laminated Glass.
123Next >Last >>
X