Search Results

Training / Education

Design Considerations for Electromechanical Flight Control Actuation Systems

This four-hour short course intends to present an overview of electrically powered flight control actuation systems, covering commercial applications. The scope covers issues related to the mechanical design of actuators themselves, with limited reference to their control electronics. Additionally, this course will provide participants an understanding of the design considerations behind these actuation systems.

Training / Education

ASME Y14.5 GD&T for Manufacturing - Introductory Level

This 1-day introductory-level course builds on fundamentals of geometric dimensioning and tolerancing and teaches the impact of GD&T on the manufacturing process. The course focuses on the basic requirements of engineering drawings, size dimensions, form tolerances, and the datum system, as well as how tolerancing requirements affect production. Each participant receives: A GD&T for Manufacturing Workbook,  A GD&T Ultimate Pocket Guide (2009), and Class handouts.  Newly acquired learning is reinforced with numerous practice exercises.

Training / Education

Introduction to Aircraft Hydraulic System Design and Certification

This four-hour short course provides an overview of hydraulic system design of typical business and commercial aircraft. Topics will include the principles, system architectures, power sources, and the main components and technologies of hydraulic systems including hydraulic power generation, filtration, fluid storage, distribution, sensing and control. The step by step process of designing a hydraulic system will also be reviewed. Additionally, future trends in hydraulic systems will be discussed.

Training / Education

Design Considerations for Electrohydrostatic Actuators

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development. This four-hour short course will provide an overview of design considerations for electrohydrostatic actuation for transport and business aircraft applications.  The instructor will present the critical topics of electrohydrostatic actuation (EHA) from a systems development perspective (V-Approach).  Beginning with aircraft system requirements, the instructors will then guide participants through EHA subsystem requirements, component design, component verification test, aircraft integration, and use. 

Training / Education

Fundamentals of GD&T ASME Y14.5 - 2009 Advanced Level

This 3-day Fundamentals of GD&T course provides an in-depth study of the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing, as prescribed in the ASME Y14.5-2009 Standard. The course can be conducted in three 8-hour sessions or with flexible scheduling including five mornings or five afternoons. 

Training / Education

Applications of GD&T ASME 14.5 - 1994 & 2009 Foundational Level

This course teaches the thought processes involved in assigning GD&T to components, and it changes the way many engineers think about part tolerancing. The course focuses on what constitutes good and poor drawing practices, common dimensioning methods used in industry, using GD&T to communicate system functions on component dimensions, and the logic of how to apply GD&T to components. You’ll also learn how to select datum features and how to fully define component surfaces using GD&T. Establishing tolerance values is not covered.   

Training / Education

Advanced Concepts of GD&T ASME Y14.5M 1994 - Foundational Level

This 2-day foundational-level course teaches advanced geometric dimensioning and tolerancing topics as prescribed in the ASME Y14.5M-1994 Standard. 

Training / Education

Fundamentals of Functional Gaging and Measurement - Foundational Level

This 2-day foundational-level course teaches functional gaging design. It covers how to verify part dimensional requirements using functional gages and other measurement methods. The course offers an explanation of metrology, the roles of the metrologist and inspector, measurement uncertainty, inspection tools, functional gages, inspection planning and reporting, and simulating datums. Each participant receives: A Functional Gaging and Measurement Workbook and  Drawing handouts. Newly acquired learning is reinforced throughout the class with numerous practice exercises. 

Training / Education

Fundamentals of GD&T for Inspectors - Foundational Level

This 2-day foundational-level course builds on geometric dimensioning and tolerancing fundamentals and teaches an introduction of how to inspect GD&T requirements.  The course offers an explanation of the geometric symbols, rules, and concepts, the datum system, and how to inspect GD&T requirements using tools from the four categories of inspection tools (CMM; comparison instruments and fixed gages; hand tools and open set up; and production gaging systems).

Training / Education

Fundamentals of GD&T ASME Y14.5M 1994 - Foundational Level

The 2-day foundational-level Fundamentals of GD&T course teaches the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing as prescribed in the ASME Y14.5M-1994 Standard. The class offers an explanation of geometric symbols, including each symbol’s requirements, tolerance zones, and limitations. It compares GD&T to coordinate tolerancing, Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 100 practice problems using industrial drawings.

Training / Education

Model-based Development of Embedded Software in Compliance with ISO 26262 – Challenges and Effective Solutions

This training class describes how to develop and safeguard safety critical embedded software in serial projects with Simulink in compliance with ISO 26262 (part 6). Beginning with a general overview of the ISO standard, we proceed by focusing on the ISO 26262 requirements that are specifically relevant to model based development. We address the impact the standard has had on model-based development with Simulink, as well as the requirements for model and software architecture in safety critical software. We also look at modeling guidelines and testing before wrapping up the class by assessing ISO 26262 readiness of controller functions.

Training / Education

Fundamentals and Applications of Electric Motors for Automotive Industries

As the electrification of automobiles is on the rise, it is imperative that the capabilities and limits of the associated devices and systems be understood at a higher level than previously considered adequate. For example, the Tesla Model S has 62 electric motors while the Model X has 70! They propel the vehicle and provide comfort too. Their design must reflect the worst case operating scenarios, duty cycles, environment, country of use and its standards, etc.

Training / Education

Design Verification Plan & Report (DVP&R) - Overview and Application

This course is verified by Probitas as meeting the AS9104/3A requirements for Continuing Professional Development. In this one-day course on Design Verification Plan and Report Overview and Application, participants will be introduced to important concepts, the basic theory behind the concepts, and discuss how these concepts can be applied to the client's design reliability activities. Participant involvement will be maximized to demonstrate and reinforce the concepts through reading assignments, group discussions, and exercises where students will begin a DVP&R on a client product.

Training / Education

Design and Evaluation of Automotive Static Perceptual Quality

This course is offered in China only and presented in Mandarin Chinese. Static perceptual quality is the term applied to the customer’s first impression of a car at the beginning of the buying process including how it looks, feels, and smells. This “first feeling” largely determines whether the customer continues through the purchase process. At present, OEMs have no systematic method for static perceptual quality in the whole vehicle design and development process, especially for the static perceptual quality review in the early stage of design and development before data freezing.

Training / Education

LIDAR and Infrared Cameras for ADAS and Autonomous Sensing

This course examines ADAS and autonomous vehicle technologies that offer the potential to increase safety while attempting to optimize the cost of car ownership. LIDAR (light detection ranging) and Infrared camera sensing are seeing a rapid growth and adoption in the industry. However, the sensor requirements and system architecture options continue to evolve almost every six months. This course will provide the foundation to build on for these two technologies in automotive applications. It will include a demonstration model for LIDAR and Infrared camera.

Training / Education

Model-Based Systems Engineering (MBSE)

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). As the complexity of products increases, traditional text-based systems engineering can no longer meet the needs. To solve the problem, Model-based Systems Engineering offers a unified communication platform among relevant staff by carrying out diagram-based unambiguous description, analysis and design for the demand, and structure and behavior of complex systems in the form of a model.

Training / Education

Technical Path and Case Analysis of Lightweight Forward Engineering for Vehicle Development and Design

The importance of weight reduction in vehicle design is well known. In recent years, OEMs have been working on vehicle lightweight research and application, particularly for new energy vehicles. Currently, many Chinese OEMs establish a lightweight target and expect that weight savings will be distributed among the vehicle’s various systems.  This tends to keep the weight reduction effort at the level of parts or partial weight loss design development and application.

Training / Education

Fundamentals of GD&T ASME Y14.5M 1994 - Advanced Level

This 3-day advanced-level Fundamentals of GD&T course is an in-depth study of the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing as prescribed in the ASME Y14.5M-1994 Standard. The course can be conducted in three 8-hour sessions or with flexible scheduling including five mornings or five afternoons.  This class includes all the content from the Fundamentals of GD&T 2-day foundational course: an explanation of geometric symbols, including each symbol’s requirements, tolerance zones, and limitations.

Training / Education

Comparison of ASME Y14.5 1994 to 2009 - Introductory Level

This 1-day introductory-level course offers an explanation of features in the ASME Y14.5-2009 Standard and compares them to the 1994 Standard. The course covers the pertinent changes made to the Y14.5 standard, including how the subject matter has been reorganized and about new sections that have been created for profile, orientation, and form. Each participant receives: An ASME Y14.5 1994-2009 Comparison Workbook,  Class handouts,  A GD&T Ultimate Pocket Guide (2009), and An ASME Y14.5 1994-2009 Comparison Chart Set. Newly acquired learning is reinforced throughout the class with numerous practice exercises.

Training / Education

Design of Experiments - Basic Simplified Taguchi

Design of Experiments is a statistically based, structured approach to product or process improvement that will quickly yield significant increases in product quality and subsequent decreases in cost.  Products and processes can be designed to function with less variation and with less sensitivity to environmental factors or customer usage. While still maintaining high quality from a customer's viewpoint, products and processes can utilize lower cost materials and methods.  Specifications can be opened-up with wider tolerances while still maintaining high quality for customers.