Search Results

The big engine that could With the stringent EPA 2015 regulations on large diesel engines for locomotive, marine, and stationary generator applications, the need for NOx reduction via urea SCR catalyst arises given the proven performance of urea SCR. Monitoring hydraulics Component producers and vehicle service providers offer their views of hydraulic diagnostics as the industry moves toward real-time, intelligent health monitoring, predictive failure software algorithms, and wireless notification. Engine management expands from minute movements to full vehicle Electronic controls grow in complexity as engine designers extend their scope to include hydraulics.

After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.

Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.

Next-generation power Additional benefits for commercial customers may drive hybrid technology adoption. Shake and bake: a recipe for testing Vehicles, components endure much in-lab abuse before they enter the commercial-vehicle market. Fuel for thought The performance and emissions of a stationary single-cylinder diesel engine is evaluated using an ethanol blend with diesel and jet fuels.

The diesel engine diet Researchers correlate engine performance and durability with the properties of alternative fuels that consist of vegetable oils and animal fats. Looking at a safer future Software, other sensors will augment cameras as safety's role in the off-highway industry takes an upward spiral. Plastics expand their range From high-speed train exterior panels to powertrain components, plastics and composite materials are finding their way into more off-highway applications.

Technology for small-engine emissions reduction Swiss researchers used a modern four-stroke engine in conjunction with a commercially available catalytic converter and special gasoline to develop a significantly cleaner-running walk-behind mower. Large-scale application of J1939 The SAE electronic systems communication standard provides a method for achieving engineering flexibility, product standardization, parts rationalization, service, and customer convenience. Focus on electronics OEMs and their suppliers are developing vehicle systems for improved vehicle operation and reliability/durability with the help of electronics. The following pages review some recent industry advancements. 2000 SAE International Off-Highway Congress: one for the ages From antique off-highway equipment to the latest in intelligent vehicle technology, the 2000 SAE International Off-Highway & Powerplant Congress & Exposition brings yesterday and tomorrow together today.

Off-highway CVTs A continuously variable transmission can improve the fuel efficiency of heavy-duty diesels by matching the engine's torque/speed to the applied load through the smooth torque multiplication of the transmission. Hydraulics for economics The design of a digitally controlled hydraulic fan drive from Denison Hydraulics is said to help diesel engines run leaner and cleaner. Telematics boosts productivity Advances in electronic technology enables equipment owners and operators to monitor not only usage, but location of equipment. A dumper on tracks Industrial vehicles featuring composite rubber-tracked drive systems have become increasingly popular over the past 10 years, carving out a respectable niche in many specialized industries.

All things to all operators Manufacturers of commercial powerplants simultaneously tackle fuel efficiency, performance, and life-cycle costs. Digital morphs the radio landscapes In the world of aerospace, smaller radios are able to handle a larger number of frequencies. Top technologies for 2005 A look back at some of the most significant technological innovations in the news during the past year, as deemed by readers and editors.

Increasing the hydroforming knowledge base Tube hydroforming has become a viable economic alternative to various stamping and welding processes in automotive applications. Controlling two-stroke engine emissions With the constant rich operation of two-stroke engines, common design criteria for three-way catalysts fail. DaimlerChrysler technical symposium A year after the merger that created the new corporation, engineers from both groups came together to present a unified technical symposium to review the future direction of the new organization. Here are some highlights of the more significant technical developments. Vertical complex-shape headlamp reflectors Another improvement in lighting technology gives designers increased flexibility in vehicle appearance with no loss in lighting performance. Advances in static and dynamic exhaust system seating Major redesign, combined with minor improvements in simple details, returns significant benefits in sealing.

Chrysler sees the ICE future The three-year, $30 million Multi-fuel Multiair R&D program with the U.S. DOE is nearing completion. Here's what Chrysler Powertrain engineers have learned as they try to achieve a 25% fuel-efficiency gain. Counteracting cyber-attacks As vehicle systems become more complex and interact with more internal and external elements, the potential for outside intrusion and tampering increases for both vehicles and the transportation infrastructure. Kia moves upscale with 2014 Cadenza The all-new premium sedan is the Korean automaker's 'most technologically advanced' vehicle ever on U.S. roadways. 2014 Corvette: 460 hp, 30 mpg, 1 g, $52,000 No other sports car can match the C7's combination of performance, value, and overall efficiency. Chief Engineer Tadge Juechter provides insight on executing a masterpiece.

Getting the aero advantage Team Rahal has come up with several innovative ways of integrating and implementing Fluent Inc.'s computational fluid dynamics softwarae into its engineering process. Jordan Grand Prix benefits from 3-D design This motorsports team's transition from 2-D design to 3-D digital modeling using SDRC's I-DEAS software has resulted in shorter lead times and improved part fit. The 2002 Explorer/Mountaineer Ford engineers further improve ride, handling, and safety while increasing the vehicles' power. Cadillac's re-engineered Escalade The 2002 model has a host of new, advanced features including "Northstar-inspired" powertrains, StabiliTrak stability control, and a Road Sensing Suspension system. Explorer Sport Trac breaks new ground Ford says its 2001 Explorer Sport Trac, based on the 2001 Explorer four-door, was engineered for improved ride and handling, and is the first traditional SUV with an open cargo area.

Managing software growth An increased emphasis on modeling and autocoding makes it easier to add software-based features and functions, driving a sea change in the way complex automotive systems are designed. Going beyond Bin 5 and Euro 5 An early look at some of the emissions-control and aftertreatment technologies and tools aimed at helping automakers meet future U.S. and European regulations. Finding flexibility Although automation is important to achieving flexibility, manufacturers cannot neglect product design, manufacturing processes, and personnel. Looking for a little help Automotive companies increasingly look outside, offshore to get complex designs finished quickly. The autonomous future Like it or not, cars that drive themselves are on the horizon. Will you trade control for safety? Dodge Ram A keen focus on fuel economy centers on improved aerodynamics, powertrain efficiency, and weight-reducing technologies.

Parisian delights The concept vehicles at September's Paris Motor Show ranged from futuristic, over-the-top dream machines with diesel hybrid power to fuel-efficient small cars with high-end interiors. Software poses hard challenges Autocoding, reuse help automakers produce increasingly more lines of code. The two-wheeler future Japanese manufacturers look to crossovers, hybrids, and alternative-energy concepts to reinvigorate the motorcycle industry. An Aura of refinement Saturn took cues from its European partner when designing a new entrant for the U.S. midsize market. Decongesting Denver The road to safer and more efficient ground transportation in the Mile High City is being paved, in part, via a romance between highway and light rail. Hybrids for commerce Though they represent a fraction of the Japanese hybrid fleet, the four Japanese commercial-vehicle manufacturers offer diesel-electric hybrid trucks and buses that are on the leading edge of the technology.

Cadillac CTS GM's all-new global sports sedan makes no excuses in chassis dynamics, body integrity, powertrain performance, premium materials, and overall craftsmanship. Taking control of hybrids Software must monitor and manage many parameters while coordinating the complex operations of the engine, electric motors, and batteries. LIghter, faster, lower cost Ducati's top engineer brought a "maniacal" approach to developing the 1098 superbike. Diesels' brave new year Lean-NOx catalysts, closed-loop cylinder pressure sensing, and homogenous combustion are making "50-states" diesels a reailty. Behind the curtain AEI takes an in-depth look at how the designers and engineers at General Motors took the company's trio of new crossover SUVs from sketchbook to road. Engineering from everywhere With future growth in car and truck sales coming mainly from emerging markets, companies are realigning their engineering operations accordingly.

Speed is king Motorsports offers automakers a fast way to develop new technologies and quick-thinking engineers. This article explores how DaimlerChrysler, Ford, and General Motors approach motorsports as an engineering tool. Electronics: changing the shape of the automobile The decisions made by the automotive industry the next few years will forever change the shape of the automobile. The electronic technologies to improve fuel economy, increase passenger safety, lower emissions, and improve reliability are evolving quickly, but because of their cost the exact timeframe for their implementation is undecided. Chevrolet Corvette The Z06 is the big news for 2001, the new model having a high-output 5.7-L LS6 V8 developed by GM Powertrain. Innovation meets the mid-size segment The 2001 Chrysler Sebring and Dodge Stratus offer more power, enhanced NVH characteristics, and improved safety. Third-generation M3 The all-new high-performance M3 coupe debuts in North America.

Ultracapacitors charge ahead The limitations of current energy-storage solutions could encourage consideration of these alternative solutions, but more engineering work needs to be done to reduce costs. Technology for all Automotive industry executives expect high-end technologies, once considered only for inclusion in luxury cars, to increasingly make their way into entry- and mid-level vehicles in the very near future. Convergence continues A lot of automotive electronics ground has been covered at the Convergence conferences past, and there's more to come at this year's show in October. Fueling the next generation As hydrogen joins the battle for automotive power with gasoline and diesel, the future could be more choices rather than one winner.

A sense of safety Engineers are looking to combine radars of different ranges, cameras, and sophisticated controls to prevent collisions. Priming the green-car pump In a "perfect storm of opportunity," billions of dollars in federal funding are flowing toward next-generation, made-in-the-U.S. hybrid and electric-vehicle technology. Re-engineering the auto engineer The electrification of the vehicle is boosting demand for engineers with new competencies and skill sets. In Part 1 of this special two-part feature series, AEI examines why the industry needs to encourage and develop its most critical resource-people. Aerodynamics soar Automakers toil to minimize drag and maximize fuel economy.

GM's hybrid SUVs: AEI's Best Engineered Vehicles for 2008 The Chevrolet Tahoe Hybrid and GMC Yukon Hybrid get up to 50% better city and 30% better combined fuel economy while still delivering comparable performance thanks to a thorough vehicle re-engineering and an industry-first 2-mode hybrid-powertrain. Bright outlook for diagnostics Telematics will augment more sophisticated data gathering, but challenges are many. Second-generation biodiesels As traditional fuels become more expensive and scarce, the biofuels industry is scrambling to develop more sustainable sources from nonfood agriculture. Global Viewpoints: North America In this special section, some of the North American automotive industry's top executives discuss the latest trends and their strategies for game-changing vehicle engineering and development.