Search Results

The big engine that could With the stringent EPA 2015 regulations on large diesel engines for locomotive, marine, and stationary generator applications, the need for NOx reduction via urea SCR catalyst arises given the proven performance of urea SCR. Monitoring hydraulics Component producers and vehicle service providers offer their views of hydraulic diagnostics as the industry moves toward real-time, intelligent health monitoring, predictive failure software algorithms, and wireless notification. Engine management expands from minute movements to full vehicle Electronic controls grow in complexity as engine designers extend their scope to include hydraulics.

After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks Small engine landscape Kubota engineers developed new small-displacement engines that adopt a common-rail system while optimizing the combustion system and injection characteristics. Sensitive to safety A growing number of digital sensors are among the tools being used to make sure failures are rare and injuries are even more infrequent.

Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.

Editorial As Argo taps out, the AV industry resets The Navigator 2022 a mixed bag for the AV sector Volvo's New Sensor Sweet A Luminar Iris lidar in the 2024 EX90 is engineered to enhance both automated driving and safety. Inner Visions Automated-driving and ADAS functionalities continue to influence some of the latest cabin safety and materials trends. The Olfactory Factor in AV Interiors Aryballe Technology's unique sensors-on-a-chip solution aims to end the subjectivity of the human nose while neutralizing vehicle cabin odors. AV Life After Argo AI Every new industry sector goes through a consolidation process where the strongest survive, and so it is with automated and autonomous driving technologies. Robotic ADAS Testing Bridges the Sim Gap ASI's Swarming technology allows collision-avoidance and other tests at high speeds on vehicles that human drivers find hard to match. New Tools & Technologies

Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.

Operator station innovations Off-highway engineers work hard to provide comfort, ease of operation, and reliability to users. As an added challenge, they must design for operators who can spend an entire day working hard in their cab. Designing online Major developments in internet-based technologies are profoundly changing the engineering/design process, revolutionizing the way OEMs and suppliers do business, and speeding the industry's time-to-market. FEA simulation of an electrohydraulic system Researchers from the Milwaukee School of Engineering provide an accurate model of a typical magentic actuator Predicting injury in forklift upsets Researchers from the Biomechanics Institute present test results that demonstrate operators can prevent ejection and injury from a forklift if they are lap-belted and have either a winged seat or hip restraint.

Simulating cab noise and vibration Researchers at kubota and Doshisha University have established a prediction method for the engine-idling state using statistical energy analysis. Manufacturing cost estimating Caterpillar's ACT Group uses Micro Estimating Systems' computer-aided estimating program to increase efficiency and decrease operating costs in powder-metal part manufacturing. In search of greener pastures Agricultural OEMs are looking at the total life cycle to develop more environmentally conscious products and processes. Emissions and lubrication More stringent diesel emissions legislation is placing an increased burden on engine lubricant in the form of soot loading.

Next-generation power Additional benefits for commercial customers may drive hybrid technology adoption. Shake and bake: a recipe for testing Vehicles, components endure much in-lab abuse before they enter the commercial-vehicle market. Fuel for thought The performance and emissions of a stationary single-cylinder diesel engine is evaluated using an ethanol blend with diesel and jet fuels.

Engineering a cleaner off-highway world As engine manufacturers gear up to meet the next round of stringent emissions standards, equipment manufacturers are reviewing a number of design possibilities. Plugging in for safety Electronics dig deep to help protect operators and equipment. Leveraging the best of both worlds Combustion and aftertreatment technologies help engine manufacturers balance performance with emissions reduction.

Shrinking hydraulics The push to conserve fuel and reduce emissions is prompting major changes in system design. Aftertreatment temperature control Regeneration of a DPF burns off soot, but also raises exhaust gas temperature. Speed thrills: doing more tests in less time Quicker data gathering, simulation keep quality high despite time crunch. Green engineering The quest to alleviate environmental and efficiency pressures turns up 'small' material solutions with big benefits. A global forum Cummins executives lay the groundwork for a lively and informative discussion at this year's Commercial Vehicle Engineering Congress & Exhibition.

In search of the perfect burn The simultaneous download pressures on NOx and PM continue to make research into higher injection pressures and alternative combustion solutions such as homogenous-charge compression ignition attractive. One way to stop a train A new self-energizing electrohydraulic brake offers the advantages of hydraulic brake actuation without the disadvantages of a centralized hydraulic power supply. A model combustion: from art to science Analysis tools, advanced hardware provide insight into combustion process, refining the cylinder's 'big bang.' The datalinked vehicle In the fields and on the job site with GPS.

Engine electronics come of age Changes in global standards, combined with engineering know-how, have resulted in a new generation of clean, quiet, and efficient engines. Operators are rolling in the chips Microprocessors and sensors are being combined to monitor the way that equipment is being used, then help operators to perform better in that environment. Gaining weight Perkins' influence in the off-highway industry grows as it evolves its global engine lines and expands its presence in the U.S. What's new at CONEXPO-CON/AGG, Part 2 of 2 A preview of some of the products and technologies that will be displayed at this year's event, scheduled March 15-19 in Las Vegas, NV. Engineering a career Off-highway companies are challenged not only by the ever-changing technology landscape, but also by finding the engineering talent to help them succeed in it.

The diesel engine diet Researchers correlate engine performance and durability with the properties of alternative fuels that consist of vegetable oils and animal fats. Looking at a safer future Software, other sensors will augment cameras as safety's role in the off-highway industry takes an upward spiral. Plastics expand their range From high-speed train exterior panels to powertrain components, plastics and composite materials are finding their way into more off-highway applications.

Making sense of engines Heavy-duty equipment is known for its ruggedness in harsh environments, but vehicles are not neglecting their sensitive side. The world's fastest digger gets closer JCB's Dieselmax goes 350 mph and teaches engineers much about engine capability, extreme testing, and program management. The whole system, and nothing but the system Properly implemented, an electrohydraulic system can add a great deal of automatic control, advanced performance, advanced diagnostics, and remote monitoring to a mobile application. Regenerative hydraulics The use of multiple hydraulic pumps can satisfy the needs of various circuits in off-highway equipment. The gas is greener Biofuels promise to help reduce petroleum cinsumption and CO2 emissions, but much of the potential depends on production and infrastructure investments. Material returns Effective use of materials information is important to engineers in development of parts and components.

Off-highway CVTs A continuously variable transmission can improve the fuel efficiency of heavy-duty diesels by matching the engine's torque/speed to the applied load through the smooth torque multiplication of the transmission. Hydraulics for economics The design of a digitally controlled hydraulic fan drive from Denison Hydraulics is said to help diesel engines run leaner and cleaner. Telematics boosts productivity Advances in electronic technology enables equipment owners and operators to monitor not only usage, but location of equipment. A dumper on tracks Industrial vehicles featuring composite rubber-tracked drive systems have become increasingly popular over the past 10 years, carving out a respectable niche in many specialized industries.

Quality in the integrated product team In the early phases of product development, quality must be engineered and managed into the product. Advancing icing detection Engineers are working to develop a capability to detect icing conditions ahead of aircraft using onboard and ground-based remote sensing systems. Testing times Methods for testing aircraft engines have changed dramatically over the years for Rolls-Royce- almost as much as the engines themselves. This is the last installment of a three-part series on aircraft engine testing.

Getting the aero advantage Team Rahal has come up with several innovative ways of integrating and implementing Fluent Inc.'s computational fluid dynamics softwarae into its engineering process. Jordan Grand Prix benefits from 3-D design This motorsports team's transition from 2-D design to 3-D digital modeling using SDRC's I-DEAS software has resulted in shorter lead times and improved part fit. The 2002 Explorer/Mountaineer Ford engineers further improve ride, handling, and safety while increasing the vehicles' power. Cadillac's re-engineered Escalade The 2002 model has a host of new, advanced features including "Northstar-inspired" powertrains, StabiliTrak stability control, and a Road Sensing Suspension system. Explorer Sport Trac breaks new ground Ford says its 2001 Explorer Sport Trac, based on the 2001 Explorer four-door, was engineered for improved ride and handling, and is the first traditional SUV with an open cargo area.

Frankfurt Motor Show The art of automotive product packaging is a complex, multifunctional design and engineering discipline that has led to cars with relatively small overall dimesnions yet remarkable interior space. E-volutions As the movement to improve various supply-chain functions through the implementation of e-business initiatives gains momentum, the providers of the products and services that make the benefits possible are becoming more important to the automotive industry's future. Automakers going digital A math-based, vehicle-devleopment-process strategy has helped General Motors to achieve greater engineering capability, efficiency, and quality. A more redefined Ram Chrysler Group engineers have employed the use of hydroforming, new airbag technology, and aerodynamics, among other things, to improve the design, ride, and safety of the Dodge Ram 1500 for model year 2002.