Search Results

Article

ChemSEI-Linker extends lithium battery life, increases EV range

2018-01-19

The Industrial Technology Research Institute (ITRI), Taiwan’s largest technology R&D institution, has announced a new material designed to increase cycle life and improve recyclability of lithium batteries.

Article

Tooling decisions play major role in cost, turnaround time

2018-07-24

“Laddering up” of the range of tooling options requires assessing at each plateau whether greater upfront investment in tooling will pay off with a relatively quick return on investment. Since tooling plays such a key role in this equation, it also means working closely with OEMs willing to evaluate the best available tooling options at any time as production requirements increase.

Article

SAE International anti-counterfeit standards integral to obsolescence management

2018-07-25

Counterfeit parts prevention is integral to an effective obsolescence management plan, and the focus of anti-counterfeit standards – including Counterfeit Avoidance Standard (AS5553) and Counterfeit Detection Standard (AS6081) – from SAE International in Warrendale, Pa. SAE International officials are bringing the anti-counterfeit discussion and sharing best practices, which include adherence to critical standards, to the Future of Obsolescence Management (FOM) event on October 10 and 11 in Washington.

Article

Martin UAV VTOL unmanned aircraft taps Persistent Systems Wave Relay data link technology

2018-07-18

Engineers at Martin UAV are incorporating Wave Relay mobile ad hoc network (MANET) technology from Persistent Systems into the company’s V-BAT small, vertical takeoff-and-landing (VTOL) unmanned aerial vehicle (UAV).

Article

AI closes the loop for composites manufacturing

2018-06-27

In a collaborative project between the CFMS and the NCC, both in Bristol, England, a closed loop manufacturing process has been demonstrated for the resin transfer molding (RTM) of high-quality composite components.

Article

Boeing virtualizes, secures additive manufacturing across supply chain with Assembrix

2018-06-20

Boeing collaborates with Assembrix to manage and protect intellectual property shared with vendors across its global supply chain for additive manufacturing.

Article

Orbex debuts innovative smallsat launch vehicle

2019-02-20

Orbex, a developer of small satellite (smallsat) launch vehicles based in Forres, Scotland, has unveiled its “Prime” launch vehicle. The rocket utilizes several novel technologies, including the world’s largest metal rocket engine produced as a single piece through additive manufacturing (AM).

Article

Norsk and SAE International collaborate on world’s first directed energy deposition specification

2019-02-18

Norsk Titanium’s proprietary “Rapid Plasma Deposition” (RPD) additive manufacturing (AM) process is distinguished in the aviation industry for producing complex, titanium structural and safety-critical components for many original equipment manufacturers (OEMs). But today, through a partnership with SAE International, Norsk’s RPD process and material requirement specifications are available to a wider, global base of manufacturers.

Article

Integrating additive manufacturing into development, production – a free SAE webinar

2018-08-08

SAE International in Warrendale, Pa., is inviting members of the mobility engineering community to participate in the SAE Additive Manufacturing Webinar: Considerations When Integrating Additive Manufacturing into Aerospace and Ground Vehicle Development and Production Environments on Thursday, August 16, 2018 at 1 pm EDT/10 am PDT.

Article

Cepton Technology’s newest highspeed lidar sensor can spot a tow hitch on a vehicle traveling 50 miles per hour

2019-06-07

The SORA-P60 uses Cepton’s Micro-Motion Technology (MMT) to achieve an industry leading 1,200 scan lines per second, to provide accurate 3D scans and to enable automated classification of objects and volumetric scanning. The sensor is currently installed at an undisclosed highway tolling facility in the United States.

Article

Wind River and Airbiquity partner to update autonomous and connected vehicle software through cloud-based, over-the-air technology

2019-06-04

Through this work, Wind River and Airbiquity look to enable secure and intelligent software updates and data management for these vehicles through over-the-air (OTA) programming technology. The work may also lead to similar solutions for traditional aerospace and unmanned aircraft system (UAS) industries.

Article

With new partnerships, OTSL builds out 3D real-time sensor simulator framework for self-driving cars

2019-07-16

With COSMOsim, OTSL is looking to better virtually recreate diverse driving conditions to enable safe and accurate verifications at a point when autonomous driving continues to move toward practical use around the world.

Article

Demand up for composite-grade, high-performance plastics across aerospace, automotive

2018-08-23

Demand for high-performance plastics (HPPs) is up across the aerospace industry, driven by such key trends as growing performance requirements, increased use of additive manufacturing or 3D printing, supply chain globalization, and tightening environmental regulations. Growing passenger traffic coupled with the need to reduce emissions – being accomplished through lightweighting, engine downsizing, and vehicle electrification – present opportunities for HPPs, research analysts at Frost & Sullivan in San Antonio, Texas, explain.

Article

Arconic unveils advanced titanium alloy for higher temperature aerospace applications

2018-08-13

ARCONIC-THOR –designed for higher temperature applications in next generation aero engines and adjacent structures. The ARCONIC-THOR alooy is nearly 50 percent lighter than incumbent nickel-based superalloys.

Article

Canada’s future search and rescue aircraft get its first set of eyes

2018-07-27

Today, L3 WESCAM delivered the first of its first MX-15 electro-optical and infrared system to Airbus Defense and Space in support of Canada’s Fixed-Wing Search and Rescue aircraft replacement program.

Article

Sciaky, Aubert & Duval, and Airbus join together to combine high-power forging with additive manufacturing

2019-07-02

Sciaky, a Chicago-based subsidiary of Phillips Service Industries, Inc. (PSI), will contribute its novel Electron Beam Additive Manufacturing (EBAM) wire-fed metal 3D printing technology to a new traditional/additive hybrid process to manufacturing titanium alloy aircraft components.

Article

NATS will test AI at Heathrow to reduce weather-related flight delays

2019-01-28

By processing ultra-high-definition (UHD), 4K resolution camera images with state-of-the-art AI and machine learning systems at a new £2.5 million ($3.3 million) “digital tower laboratory,” NATS is investigating whether these technologies can improve Heathrow’s landing capacity during low-visibility periods and reduce flight delays.

Article

Collins Aerospace will provide avionics and synthetic vision for the supersonic X-59 QueSST

2019-01-31

The X-59 utilizes a long and slender airframe to achieve supersonic speeds without causing a high decibel sonic boom. The unconventional design precludes the use of a forward-looking window or viewport. Collins Aerospace is providing a dual multi-spectral enhanced vision system to give pilots a forward view of the airspace.

Article

The F-22 Raptor gets its first metallic 3D-printed part

2019-01-24

Maintainers from the U.S. Air Force 574th Aircraft Maintenance Squadron (AMXS) have installed the first titanium additively manufactured titanium component on an operational Lockheed Martin F-22 Raptor.

Article

General Atomics moves towards global RPA flight certification for MQ-9B SkyGuardian

2019-04-10

A General Atomics Aeronautical System, Inc. (GA-ASI) MQ-9B SkyGuardian remotely piloted aircraft (RPA) was controlled – from takeoff to landing – by an operator using a GA-ASI certifiable ground control station (CGCS), marking the first time a CGCS was used to control an end-to-end flight and the first step in type-certifying the unit.