Search Results

Training / Education

Metals Bundle

Almost 75% of all elements are metals. Metals can be classified as either ferrous or non-ferrous and generally conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than other elemental substances. The following six eLearning courses are included in the Materials bundle. Each course is approximately one-hour in duration. See topics/outline for additional details. Introduction to Metals, Ferrous Metals, Nonferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel Exotic Alloys

Training / Education

Aluminum Metallurgy

There are a wide variety of wrought aluminum alloys, each developed to provide specific properties. Getting the strength participants need in an aluminum alloy requires knowledge of the effects of alloy composition, cold-working, and heat treating on aluminum metallurgy and properties. A good understanding of how aluminum alloys behave and what can be done to modify their properties is critical for being more productive and profitable. The course takes about one hour to complete and consists of one module and a final exam. Also, quizzes and problems provide participants opportunities to apply the concepts taught.

Training / Education

Metallurgy of Steel: Principles

Getting the strength and hardness you need in your steel requires knowledge of the effects of alloy composition and heat treating on steel properties. With knowledge of steel metallurgy you’ll be better able to: Select the most appropriate alloy and heat treating process for your application Evaluate suppliers Develop manufacturing processes Solve quality problems A good understanding of what can be done to modify the properties of steel is critical for being more productive and profitable.

Training / Education

Ferrous Metals Bundle: Steel and Cast Iron

Ferrous metals contain iron and are prized for their tensile strength and durability. Most are magnetic and contain a high carbon content which generally makes them, with the exception of wrought iron and stainless steel, vulnerable to rust. The following seven eLearning courses are included in the Ferrous Materials Bundle: Steel and Cast Iron. Each course is approximately one-hour in duration. Modules include: Introduction to Physical Properties, Introduction to Mechanical Properties, Introduction to Metals, Hardness Testing, Ferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel.

Training / Education

FEA Beyond Basics: Thermal Analysis Web Course RePlay

Finite Element Analysis (FEA) is a powerful and well recognized tool used in the analysis of heat transfer problems. However, FEA can only analyze solid bodies and, by necessity thermal analysis with FEA is limited to conductive heat transfer. The other two types of heat transfer: convection and radiation must by approximated by boundary conditions. Modeling all three mechanisms of heat transfer without arbitrary assumption requires a combined use of FEA and Computational Fluid Dynamics (CFD).

Training / Education

Additive Manufacturing Bundle

Many companies are starting to recognize the benefits additive manufacturing (AM) offers in terms of speed, simplicity, reliability, and cost. Additive manufacturing is a process in which a three-dimensional computer model design s built into a physical object by joining thin layers of material. AM is a versatile field that encompasses a variety of methods, materials, and applications. The one-hour courses in this bundle explain the fundamental concepts of additive manufacturing, including the main principles behind AM and the safety precautions to take during the process.

Training / Education

Out-Innovate the Competition

Well-intentioned leaders, in their attempts to boost innovation, are inadvertently destroying it. Based on Stephen Shapiro’s bestselling book, Best Practices are Stupid: Ways to Out-Innovate the Competition, this online learning experience offers counterintuitive yet proven strategies for boosting innovation and making it a repeatable, sustainable, and profitable process. He teaches that innovation isn't just about generating occasional new ideas; it's about staying consistently one step ahead of the competition.

Training / Education

IATF 16949:2016 Overview

IATF 16949:2016 is a technical specification for the automotive sector quality management systems, developed by the International Automotive Task Force (IATF), aimed at harmonizing the different supply chain assessment and certification systems worldwide. The IATF 16949:2016 standard incorporates applicable automotive customer-specific requirements and is a supplement to ISO 9000/9001:2015 requirements for automotive production and relevant service part organizations. 

Training / Education

IATF 16949:2016 Standard Training

IATF 16949:2016 is a technical specification for the automotive sector quality management systems, developed by the International Automotive Task Force (IATF), aimed at harmonizing the different supply chain assessment and certification systems worldwide. The IATF 16949:2016 standard incorporates applicable automotive customer-specific requirements and is a supplement to ISO 9000/9001:2015 requirements for automotive production and relevant service part organizations. 

Training / Education

Doing the Right Things Right

Based on the book by bestselling author/award-winning speaker Laura Stack, Doing the Right Things Right: How the Effective Executive Spends Time, this course focuses on to obtain profitable, productive results by managing two critical values: effectiveness and efficiency. Stack describes her 3T Leadership model, 12 practices to enable executives to apply these values, grouped into three areas where leaders spend time: strategic thinking, teamwork, and tactics. Following an assessment of personal productivity practices, learn how to build and apply these practices to situations that require making tough choices about managing time.

Training / Education

AS7489: Aerospace Coating Fundamentals for ACAS Personnel

This introductory AS7489 certification course provides both new and tenured aerospace coatings application specialists (ACAS) with technical training on safety and engineering compliance. Topics specific to the successful preparation and coatings application of aircraft substrates will be the central focus. This course is approved by Probitas Authentication and the successful completion of this course fulfills the training requirements for SAE AS7489 ACAS Course I Certification.

Training / Education

Electrodes to Cells

This course explains how a lithium-ion cell can be designed, sized, and produced for a specific capacity and energy. The key steps in the selection and production of the main components of the cell, i.e. electrodes, separator, and electrolyte, are discussed. The slurry formulation, mixing, coating, drying, calendaring, cutting, stacking, electrolyte formulation/injection, sealing/packing, and formation cycles are detailed both in terms of machineries and the processing parameters.

Training / Education

Adhesives Bundle

Manufacturers increasingly rely on adhesives to assemble a variety of products, such as cars, computers, furniture, and toys. An adhesive is a substance used to join two or more materials. Adhesive bonding is the process of placing an adhesive between two surfaces, or substrates, and allowing it to harden, or cure. Structural adhesives are most commonly used in adhesive bonding, since they can easily withstand heavy loads. Epoxies, anaerobics, acrylics, silicones, urethanes, and cyanoacrylates are commonly used structural adhesives. These courses explain the fundamental concepts of adhesive bonding as they apply to product assembly.

Training / Education

Standardization in a Competitive Environment

The course introduces the value of standards and how they can be better utilized within organizations. The course also examines standards in the global marketplace, looks at the role of competition, competitiveness, and differentiation, and identifies strategic priorities related to standardization and standards, specifically related to supply chain and international trade agreements. Participants will gain an understanding of a strategic approach for the management and utilization of standards within an organization. The estimated time to completion, including practice exercises, knowledge checks and the learning assessment is two hours.

Training / Education

Introduction to Design of Experiments (DOE) for Engineers

Design of Experiments (DOE) is a methodology that can be effective for general problem solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications of DOE include, but are not limited to, identifying root causes to quality or production problems, identifying optimized design and process settings, achieving robust designs, and generating predictive math models that describe physical system behavior. This introductory eLearning course provides an example scenario to give learners the opportunity to discover situations that may warrant a designed experiment.

Training / Education

Design of Experiments (DoE) for Engineers

How do you determine the root cause of a problem or identify which variable settings will make the product or process more "robust"? What if you need to gain a better understanding of a complicated system? Can you identify which variables most affect performance and obtain a well-correlated regression equation that explains how those selected system variables and their interactions affect performance?   Design of Experiments (DOE) is an excellent, statistically based tool used to address and solve these questions in the quickest, least expensive, and most efficient means possible.

Training / Education

IATF 16949:2016 Auditor Training

IATF 16949:2016 is a technical specification for the automotive sector quality management systems, developed by the International Automotive Task Force (IATF), aimed at harmonizing the different supply chain assessment and certification systems worldwide. The IATF 16949:2016 standard incorporates applicable automotive customer-specific requirements and is a supplement to ISO 9000/9001:2015 requirements for automotive production and relevant service part organizations. 

Training / Education

Principles of Metallurgy

This online course teaches the basic microscopic structures present inside of metals, how these structures and metal composition influence metal strength, and how these structures can be modified using common manufacturing processes to obtain specific mechanical properties. Several examples are presented to demonstrate how common alloying and manufacturing methods are used to modify the microscopic structures and properties of metals. It includes twelve modules that are five to 25 minutes in length, followed by a quiz.

Training / Education

GD&T Fundamentals Based on ASME Y14.5-2018

This interactive eLearning GD&T training course now utilizes HTML5 for better browser and device compatibility. It contains 23 robust, self-paced learning modules that explain the terms, symbols, modifiers, rules, and basic concepts of geometric tolerancing as prescribed in the ASME Y14.5-2018 Standard. Progress is easily measured with instant feedback throughout each lesson that reinforces and aids in concept retention, allowing the learner to determine where further review may be needed. Full color detailed animations that help participants clearly visualize concepts, along with audio narration and 3D solid part examples.

Training / Education

ISO 14001:2015 Standard Training

ISO 14001:2015 is an environmental management standard (EMS) developed by the International Organization for Standardization (ISO). The ISO 14001 standard is generic and can be used for any organization, whether it provides physical products or services. The requirements must be carefully interpreted to make sense within a particular organization. Developing automotive products and the environmental impact of this activity is not like producing food products or offering consulting services; yet the ISO 14001 standard, because it is business and management oriented can be applied to any activity.