Search Results

Training / Education

Diesel Engine Noise Control Web Course RePlay

Anytime

This web course provides an in-depth overview of diesel engine noise including combustion and mechanical noise sources. In addition, the instructor will discuss a system approach to automotive integration including combining sub-systems and components to achieve overall vehicle noise and vibration goals.

Training / Education

Metals Bundle

Anytime

Almost 75% of all elements are metals. Metals can be classified as either ferrous or non-ferrous and generally conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than other elemental substances. The following six eLearning courses are included in the Materials bundle. Each course is approximately one-hour in duration. See topics/outline for additional details. Introduction to Metals, Ferrous Metals, Nonferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel Exotic Alloys

Training / Education

Aluminum Metallurgy

Anytime

There are a wide variety of wrought aluminum alloys, each developed to provide specific properties. Getting the strength participants need in an aluminum alloy requires knowledge of the effects of alloy composition, cold-working, and heat treating on aluminum metallurgy and properties. A good understanding of how aluminum alloys behave and what can be done to modify their properties is critical for being more productive and profitable. The course takes about one hour to complete and consists of one module and a final exam. Also, quizzes and problems provide participants opportunities to apply the concepts taught.

Training / Education

Fundamental Concepts of Turbocharging Modern Engines Current Practices and Trends Web Course RePlay

Anytime

Turbocharging is an integral part of many internal combustion engine systems. While it has long been a key to diesel engine performance, turbocharging is increasingly seen as an enabler in meeting many of the efficiency and performance requirements of modern automotive gasoline engines. This replay discusses the basic concepts of turbocharging and air flow management of four-stroke engines. It explores the fundamentals of turbocharging, system design features, performance measures, and matching and selection criteria. Topics include spark ignition, diesel engine systems, and the impact of different applications.

Training / Education

Metallurgy of Steel: Principles

Anytime

Getting the strength and hardness you need in your steel requires knowledge of the effects of alloy composition and heat treating on steel properties. With knowledge of steel metallurgy you’ll be better able to: Select the most appropriate alloy and heat treating process for your application Evaluate suppliers Develop manufacturing processes Solve quality problems A good understanding of what can be done to modify the properties of steel is critical for being more productive and profitable.

Training / Education

Nickel Metal Hydride (NiMH) Hybrid Battery Systems

Anytime

This course from SAE International training partner, FutureTech*, is a MUST for everyone servicing hybrid vehicles. Nickel metal hydride (NiMH) battery systems continue primary battery technology in hybrid vehicles and have been since the 2000 model year.  If a technical professional doesn't know the fundamentals of NiMH operation it is impossible for them to perform a solid diagnosis or repair.  This course will concentrate on the NiMH technology, how it performs as it ages, how it can effect vehicle performance and fuel economy, and how to test it by using a scan tool.

Training / Education

Ferrous Metals Bundle: Steel and Cast Iron

Anytime

Ferrous metals contain iron and are prized for their tensile strength and durability. Most are magnetic and contain a high carbon content which generally makes them, with the exception of wrought iron and stainless steel, vulnerable to rust. The following seven eLearning courses are included in the Ferrous Materials Bundle: Steel and Cast Iron. Each course is approximately one-hour in duration. Modules include: Introduction to Physical Properties, Introduction to Mechanical Properties, Introduction to Metals, Hardness Testing, Ferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel.

Training / Education

Additive Manufacturing Bundle

Anytime

Many companies are starting to recognize the benefits additive manufacturing (AM) offers in terms of speed, simplicity, reliability, and cost. Additive manufacturing is a process in which a three-dimensional computer model design s built into a physical object by joining thin layers of material. AM is a versatile field that encompasses a variety of methods, materials, and applications. The one-hour courses in this bundle explain the fundamental concepts of additive manufacturing, including the main principles behind AM and the safety precautions to take during the process.

Training / Education

Out-Innovate the Competition

Anytime

Well-intentioned leaders, in their attempts to boost innovation, are inadvertently destroying it. Based on Stephen Shapiro’s bestselling book, Best Practices are Stupid: Ways to Out-Innovate the Competition, this online learning experience offers counterintuitive yet proven strategies for boosting innovation and making it a repeatable, sustainable, and profitable process. He teaches that innovation isn't just about generating occasional new ideas; it's about staying consistently one step ahead of the competition.

Training / Education

Introduction to Cooling Airflow Systems Web Course RePlay

Anytime

Vehicle functional requirements, diesel emission regulations, and subsystem thermal limits all have a direct impact on the design of a powertrain cooling airflow system. Severe duty cycles, minimal ram air, fouling, and sometimes unconventional package layouts present unique challenges to the designer. This course introduces many airflow integration issues and vehicle-level trade-offs that effect system performance and drive the design. The goal of this course is to introduce engineers and managers to the basic principles of diesel cooling airflow systems for commercial and off-road vehicles.

Training / Education

Doing the Right Things Right

Anytime

Based on the book by bestselling author/award-winning speaker Laura Stack, Doing the Right Things Right: How the Effective Executive Spends Time, this course focuses on to obtain profitable, productive results by managing two critical values: effectiveness and efficiency. Stack describes her 3T Leadership model, 12 practices to enable executives to apply these values, grouped into three areas where leaders spend time: strategic thinking, teamwork, and tactics. Following an assessment of personal productivity practices, learn how to build and apply these practices to situations that require making tough choices about managing time.

Training / Education

AS7489: Aerospace Coating Fundamentals for ACAS Personnel

Anytime

This introductory AS7489 certification course provides both new and tenured aerospace coatings application specialists (ACAS) with technical training on safety and engineering compliance. Topics specific to the successful preparation and coatings application of aircraft substrates will be the central focus. This course is approved by Probitas Authentication and the successful completion of this course fulfills the training requirements for SAE AS7489 ACAS Course I Certification.

Training / Education

Electrodes to Cells

Anytime

This course explains how a lithium-ion cell can be designed, sized, and produced for a specific capacity and energy. The key steps in the selection and production of the main components of the cell, i.e. electrodes, separator, and electrolyte, are discussed. The slurry formulation, mixing, coating, drying, calendaring, cutting, stacking, electrolyte formulation/injection, sealing/packing, and formation cycles are detailed both in terms of machineries and the processing parameters.

Training / Education

Adhesives Bundle

Anytime

Manufacturers increasingly rely on adhesives to assemble a variety of products, such as cars, computers, furniture, and toys. An adhesive is a substance used to join two or more materials. Adhesive bonding is the process of placing an adhesive between two surfaces, or substrates, and allowing it to harden, or cure. Structural adhesives are most commonly used in adhesive bonding, since they can easily withstand heavy loads. Epoxies, anaerobics, acrylics, silicones, urethanes, and cyanoacrylates are commonly used structural adhesives. These courses explain the fundamental concepts of adhesive bonding as they apply to product assembly.

Training / Education

Introduction to Design of Experiments (DOE) for Engineers

Anytime

Design of Experiments (DOE) is a methodology that can be effective for general problem solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications of DOE include, but are not limited to, identifying root causes to quality or production problems, identifying optimized design and process settings, achieving robust designs, and generating predictive math models that describe physical system behavior. This introductory eLearning course provides an example scenario to give learners the opportunity to discover situations that may warrant a designed experiment.

Training / Education

Principles of Metallurgy

Anytime

This online course teaches the basic microscopic structures present inside of metals, how these structures and metal composition influence metal strength, and how these structures can be modified using common manufacturing processes to obtain specific mechanical properties. Several examples are presented to demonstrate how common alloying and manufacturing methods are used to modify the microscopic structures and properties of metals. It includes twelve modules that are five to 25 minutes in length, followed by a quiz.

Training / Education

Diesel Engine Technology

Anytime

Regulations and consumer expectations have shaped the modern diesel engine. Enhancements have resulted in more power, fuel efficiency, reliability, and lower emissions, an indication that diesels will remain popular in the future. This technology is most widely used in commercial applications, such as trucking, shipping, construction, busing, and more. Each year, many light and medium duty car and truck manufacturers introduce diesel vehicles worldwide. A fundamental knowledge of diesel technology is critical for anyone involved in the diesel engine support industry.

Training / Education

Introduction to Hybrid Electric Vehicle Systems

Anytime

Hybrid Electric Vehicle (HEV) models currently populating the vehicle electrification landscape indicate their dominance in the market. Although electric, plug-in, and fuel cell vehicles are making inroads in the market, the HEV stands as the market leader in adoption, and manufacturers have no plans on diminishing HEV production. HEV powertrain operation is totally different from the traditional vehicle. It is essential to understand the various operating modes and how failure modes in the hybrid system affect its operation.

Training / Education

High Voltage Vehicle Safety Systems

Anytime

This four-part course from SAE training partner FutureTech* is most beneficial if completed before servicing hybrid, plug-in and electric vehicles. These vehicles contain high voltage DC and AC safety systems that are monitored by vehicle systems controllers that will maintain a safety barrier between the vehicle operator and the vehicle body/chassis to mitigate the possibility of electrical shock. This presentation will provide the technical information and background to know how these systems operate and affect vehicle operation and driveability.

Training / Education

High Voltage Safety and PPE

Anytime

High Voltage Safety & PPE (Personal Protection Equipment) is a necessary and important course to complete when planning to diagnose or repair hybrid or electric vehicles. This eLearning course, from SAE training partner FutureTech* will provide information on how to test high voltage gloves, when and where to send high voltage gloves for periodic testing, and how to safely use the proper test equipment for measuring high voltage components in live and disabled high voltage systems.