Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Military vehicles battle for autonomy at lower cost Engineers are adding sensors, more powerful micros and faster networks as they automate tasks and pave the way to autonomy. Heavy duty lightweighting Optimization of tractor-trailer systems and component design helps to reduce overall vehicle mass, a key strategy in improving fuel economy and meeting upcoming Phase 2 GHG regulations. Navistar's SuperTruck II explores composites, WiFi to cut weight Methane state of mind New Holland ramps up its focus on alternative fuels, showcasing a methane-powered concept tractor that trims emissions, operating costs.

The next phase Meeting Phase 2 fuel efficiency and GHG emissions for heavy trucks will require multiple technology pathways-some of which are still on the horizon. Active vibration damping for construction machines An innovative concept for an active system to reduce machine oscillations based on frequency identification. Consumer electronics come on board Smartphones and tablets are likely to play a large role in HMIs for heavy vehicles-if productivity and safety are not compromised. Patton's new campaign As new SAE International President for 2017, Doug Patton will advocate STEM, "cultivation" of prospective young engineers. PACCAR's Sproull primed for SAE Commercial Vehicle post As SAE International's new 2017-2020 Commercial Vehicle Sector VP, Landon Sproull intends to bolster the society's involvement in evolving industry regulations and to better cultivate cross-sector alliances.

Meeting truck autonomy hurdles head-on Combining sensors, inter-vehicle communications and controllers poses major challenges in the effort to bring greater levels of automation to commercial trucking. Simulation key to additive manufacturing analysis Advanced simulation tools help to optimize 3D printing processes before physical build. Making the case for battery-electric fleet power Battery systems edge closer to a tipping point as commercial and heavy-duty fleets broaden their application. Electrified forklifts go big Hoist Liftruck brings full electrification to some of the biggest forklift trucks, motivated only in part by regulatory pressures.

Alternative fuels heat up This is a rich time for combustion researchers. The need for better fuel efficiency and improved emissions has never been greater. New software model to help engine makers meet diesel soot standards Simulation enables engineers to predict particulate formation early in the design process.

The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.

Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.

Engine electronics come of age Changes in global standards, combined with engineering know-how, have resulted in a new generation of clean, quiet, and efficient engines. Operators are rolling in the chips Microprocessors and sensors are being combined to monitor the way that equipment is being used, then help operators to perform better in that environment. Gaining weight Perkins' influence in the off-highway industry grows as it evolves its global engine lines and expands its presence in the U.S. What's new at CONEXPO-CON/AGG, Part 2 of 2 A preview of some of the products and technologies that will be displayed at this year's event, scheduled March 15-19 in Las Vegas, NV. Engineering a career Off-highway companies are challenged not only by the ever-changing technology landscape, but also by finding the engineering talent to help them succeed in it.

Off-highway CVTs A continuously variable transmission can improve the fuel efficiency of heavy-duty diesels by matching the engine's torque/speed to the applied load through the smooth torque multiplication of the transmission. Hydraulics for economics The design of a digitally controlled hydraulic fan drive from Denison Hydraulics is said to help diesel engines run leaner and cleaner. Telematics boosts productivity Advances in electronic technology enables equipment owners and operators to monitor not only usage, but location of equipment. A dumper on tracks Industrial vehicles featuring composite rubber-tracked drive systems have become increasingly popular over the past 10 years, carving out a respectable niche in many specialized industries.

Teams make unique statements at FSAE Michigan Some statements produced better results than others, but all teams walked away from the 2014 FSAE Michigan event with invaluable hands-on engineering experience. Teams get 'super' results at SAE Supermileage University students from around the world gathered in Marshall, MI, to determine which team could achieve the highest fuel economy at the 353th anniversary of the competition. Competition winners react to attaining coveted F1 engineering roles Two of the winners have Formula SAE experience on their side.

Taking on the Valeo Innovation Challenge Two Canadian teams-the University of Ottawa and the University of Waterloo-finished in the top 3 among about 1,000 other universities from around the world in this challenge devoted to spurring innovative ideas for transportation. Colorado State University designs fuel-cell plug-in hybrid system Competing in the EcoCAR2 competition using a Chevrolet Malibu, the Colorado State team designed a system that features a 15-kW polymer electrolyte membrane fuel cell system, an 18.9-kW•h/177-kW lithium-ion battery, and a 145-kW motor. Cal State Fullerton combines art and engineering Team's submission on its Formula SAE car won first place in the second annual Generation Auto video contest organized in part by SAE International. Collaborative research project leads to potentially swarming VTOL UAVs The AVIGLE VTOL (vertical takeoff and landing) unmanned aerial vehicle was developed via collaboration by a variety of entities for a variety of applications.

Evaluation of heavy-vehicle aerodynamic drag In an attempt to achieve a balance between Reynolds number, model scale, and tunnel blockage issues, a 1:3 scale heavy-vehicle testing program has been initiated at the Monash University 1.4-MW wind tunnel. Validating performance suspension parts advances A forum at the 2013 SEMA Show discussed three approaches to ensure performance parts compliance with Federal Motor Vehicle Safety Standard 126. Panelists also explained how simulation data, and kinematics and compliance measurements, can improve performance parts design. Active safety starts in the pilot's seat Dassault Aviation's next-generation integrated digital avionics systems contribute to enhanced air safety in civil applications. Chevrolet ups the performance ante with MY2015 Corvette Z06 Stiffer-bodied sports car gains wind-aided performance with supercharging and downforce for faster lap times.

Solving the carbon problem Promoting a sustainable future for the transportation industry will benefit the welfare of humankind. My Baja SAE journey Every day, I realize how much Baja SAE has taught me-both in life and in engineering. Honda unveils next-gen motorcycle powertrains New engines designed for low-speed torque, fuel efficiency, and riding 'character' are coupled with new DCT and CVT transmissions. Three rules of career management for 2012 Do you have a career management plan to ensure your career growth in times of corporate chaos?

New contender for the World Solar Challenge Splitting the solar power supply from the aerodynamics was the innovative approach taken by the U.K.-based Cambridge University Eco Racing Team. Mobility in the 21st Century for India: planning and creating multimodal transportation systems India's rapidly growing population has made transportation systems unable to effectively keep up with demand, losing the country untold man-hours and wasting money. 2014 Corvette: 460 hp, 30 mpg, 1 g, $52,000 No other sports car can match the C7's combination of performance, value, and overall efficiency. Chief Engineer Tadge Juechter provides insight on executing a masterpiece.

When real life and FEA meet Model validation becomes the focus for building the chassis of a BAJA SAE vehicle. One student offers his advice for making smart choices while using FEA. Wait...where is Manitoba? Andrew Smith, Executive Vice Chair for the University of Manitoba's SAE International Chapter faces limited resources and the growth of what was once a small team. High hopes or just dreaming? A look at how Asia's aircraft manufacturers are trying to break into new markets to challenge the status quo. Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks.