Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

Multi-Domain Command and Control (MDC2) Changing the Face of Modern Warfare Loop Thermosyphons Gravity-Driven Two-Phase Cooling for the 21st Century CompactPCI Serial Space A New Embedded System Specification Takes on Extreme Environments Plain Bearings for Aerospace Applications Additive Manufacturing Materials for RF Components NASA CubeSats: Pushing the Boundaries of Technology Content Addressable Memory (CAM) Technologies for Big Data and Intelligent Electronics Enabled By Magneto-Electric Ternary CAM New associative memory approach based on the propagation of spikes provides ultra-low energy search operations. Natural DNA-Based Nonvolatile Resistive Switching Memory Reliable memory devices can be realized within a single macromolecule based on natural DNA.

Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.

The man challenges of Tier 4 engineering Cutting and controlling emissions are the surface goals, but designers must also manage to cut and control costs, while adding complexity. A cool look at heat protection CFD is used to predict flow and thermal fields within the engine compartment both at steady state and transient conditions. Hushing hydraulics Researchers from the Georgia Institute of Technology put their energies into novel, compact devices for reducing fluid-borne noise.

Cold metal transfer process picks up heat CMT, with its unique characteristics, is a process that was designed particularly for welding of thin materials while achieving high quality standards.

Tying it all together Networks link control modules to bring more features and functions to the job site. Collaboration tools spread a wide net PLM suppliers are offering new tools that aid collaboration, expanding on core offerings in PDM, CAD, and CAE. The drive toward a hybrid transmission In-wheel hydraulic motors, hydraulic transformers, and a common pressure rail with accumulators put new meaning in the word drivetrain. A deep dive into metallurgical failure Even with the best engineering processes and quality planning, deviations can occur with the incoming material, things can go wrong during the manufacturing process, and service conditions can be different than expected. Standards and 'coopetition' In the heavy-duty vehicle arena, adoption of standards for networking benefits everyone.

Engine electronics come of age Changes in global standards, combined with engineering know-how, have resulted in a new generation of clean, quiet, and efficient engines. Operators are rolling in the chips Microprocessors and sensors are being combined to monitor the way that equipment is being used, then help operators to perform better in that environment. Gaining weight Perkins' influence in the off-highway industry grows as it evolves its global engine lines and expands its presence in the U.S. What's new at CONEXPO-CON/AGG, Part 2 of 2 A preview of some of the products and technologies that will be displayed at this year's event, scheduled March 15-19 in Las Vegas, NV. Engineering a career Off-highway companies are challenged not only by the ever-changing technology landscape, but also by finding the engineering talent to help them succeed in it.

Komastu produces in Peoria Advanced heavy-duty robotic frame welding technology, new factory-based transportation systems, and major changes to factory layout combine to improve quality and reduce product cycle times for Komastu at its Peoria, IL, plant. Readers' Choice: Top Technologies of the Year Readers have selected the ten most interesting stories in SAE Off-Highway Engineering during the past year. They appear in shortened form. Results are based on reader-response choices following feature articles and shorter technology items. E-business evolves What follows is an update of the year's off-highway Internet-based activities intended to streamline operations along the supply chain and speed engineering product development. Manufacturing in the computer age Today's high-tech products require high-tech processes.

Integration opens the door Semiconductor suppliers are integrating many functions into power devices while also cutting power consumption in an environment, automotive doors, where 8-bit microcontrollers still hold sway.

Diesel gets a promotion at SAE Clean Snowmobile Challenge The main rules change for the 2015 season is creation of a new engine category (diesel), the event's organizer notes in providing an overview of the SAE Collegiate Design Series competition. Wisconsin-Stout puts faith in gearbox redesign for Baja Blue Devil Racing Team believes packaging and durability advantages more than offset weight and low-end-torque penalties. Test cell at Kansas University does double duty Single-cylinder engine test cell designed for research into biodiesel also serves as an instruction tool for students. University of Michigan students have hand in Volt battery reliability Technology co-developed by U of M monitors the quality of welds used in the joining of Chevy Volt battery cells.

Taking on the Valeo Innovation Challenge Two Canadian teams-the University of Ottawa and the University of Waterloo-finished in the top 3 among about 1,000 other universities from around the world in this challenge devoted to spurring innovative ideas for transportation. Colorado State University designs fuel-cell plug-in hybrid system Competing in the EcoCAR2 competition using a Chevrolet Malibu, the Colorado State team designed a system that features a 15-kW polymer electrolyte membrane fuel cell system, an 18.9-kW•h/177-kW lithium-ion battery, and a 145-kW motor. Cal State Fullerton combines art and engineering Team's submission on its Formula SAE car won first place in the second annual Generation Auto video contest organized in part by SAE International. Collaborative research project leads to potentially swarming VTOL UAVs The AVIGLE VTOL (vertical takeoff and landing) unmanned aerial vehicle was developed via collaboration by a variety of entities for a variety of applications.

When real life and FEA meet Model validation becomes the focus for building the chassis of a BAJA SAE vehicle. One student offers his advice for making smart choices while using FEA. Wait...where is Manitoba? Andrew Smith, Executive Vice Chair for the University of Manitoba's SAE International Chapter faces limited resources and the growth of what was once a small team. High hopes or just dreaming? A look at how Asia's aircraft manufacturers are trying to break into new markets to challenge the status quo. Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks.

Inductive approach An engineering professor from Ryerson uses MapleSim to introduce more exploratory methods of teaching. Monash University scores fourth Formula SAE-A win The Monash University Formula SAE-A team demonstrated its dominance by winning its fourth consecutive Australasian event in Melbourne last December. Audi Urban Intelligent Assist The three-year joint effort between Audi AG, the Volkswagen Group Electronics Research Laboratory (ERL) in Belmont, CA, the University of Southern California, the University of California at Berkeley, and the University of California at San Diego aimed at improving drivers' information and decision-making capabilities. Hovering aircraft programs The AW609 tiltrotor and the X3 compound helicopter offer different technology solutions to the challenge of achieving higher speeds and higher-quality point-to-point air transport.

ETS Baja parts failure analysis: Geared for success When the ETS Baja team had to withdraw from the Baja Auburn 2012 event due to abnormal gear failure, an extensive analysis was required to ensure that problems of this nature would not surface again. After some serious investigation, the conclusion of almost 30 hours of research was unexpected and proved surprisingly simple. Body and soul rule at 2012 Formula SAE Months before the Formula SAE Michigan competition in May, teams were hashing out product development decisions. The end-game was presenting a racecar that had the right stuff for earning high points in the challenge's vehicle design evaluation as well as the acceleration, skid pad, endurance, and autocross dynamic performance events.

Electrochemical reactions Students from the Department of Automotive Engineering at the NED University of Engineering and Technology build the first onboard fuel-cell vehicle of Pakistan. The Baja balance How to combine heavy homework load with your CDS team responsibilities. Embraer progresses on clean-sheet military program It has been over two years since Embraer announced that it would be developing the KC-390 military airlift and tanker jet under a contract with the Brazilian Air Force (FAB), which established the requirements for the aircraft as it did with other Embraer military programs. Calling all recruiters Lack of response to distributed resumes leaves many wondering, is anyone out there?