Search Results

A discussion of the impact of a 2.5 mph bumper standard on aluminum sheet and extruded bumpers is presented. Information is presented on energy management systems, bumper shape, and dentability. This information can be used to determine whether a sheet or extruded bumper is the most efficient for a particular application.

Aluminum castings have much to offer the automotive industry in terms of weight reduction and energy savings. Their long-term acceptability can only be assured, however, by applying the most cost-effective combinations of material and processing. This paper will point out some “cost-saving” opportunities in two basic areas: (1) The use of hypereutectic aluminum-silicon alloys to eliminate a need for ferrous wear-surface inserts, to reduce machining capital expenditures and to reduce overall part weight; and (2) The use of two processing methods, “Pore-Free” die casting and “low-pressure” casting, to produce aluminum parts with minimum metal usage and energy consumption.

High integrity aluminum castings are potential replacements for cast iron in current vehicle weight reduction programs. Domestically, several cast aluminum structural-type components are already realities, saving weight and contributing to improved fuel economy; wheels, brake drums, master brake cylinders and power steering housings. In Europe, suspension components, wheel hubs and disc brake calipers are cast in aluminum for some car models, indicating the functional and economic feasibility of such parts. Alloy and process technology already exist to enable production of realiable, high strength aluminum castings. Domestic automotive product engineers are urged to carefully consider and thoroughly test such aluminum castings along with the many other weight reduction possibilities currently being investigated.

The strain-induced diffusionless shear transformation of retained austenite to martensite during straining of transformation induced plasticity (TRIP) assisted steels increases strain hardening and delays necking and fracture leading to exceptional ductility and strength, which are attractive for automotive applications. A novel technique that provides the retained austenite volume fraction variation with strain with improved precision is presented. Digital images of the gauge section of tensile specimens were first recorded up to selected plastic strains with a stereo digital image correlation (DIC) system. The austenite volume fraction was measured by synchrotron X-ray diffraction from small squares cut from the gage section. Strain fields in the squares were then computed by localizing the strain measurement to the corresponding region of a given square during DIC post-processing of the images recorded during tensile testing.

A comparison of welding techniques was performed to determine the most effective method for producing aluminum tailor-welded blanks for high volume automotive applications. Aluminum sheet was joined with an emphasis on post weld formability, surface quality and weld speed. Comparative results from several laser based welding techniques along with friction stir welding are presented. The results of this study demonstrate a quantitative comparison of weld methodologies in preparing tailor-welded aluminum stampings for high volume production in the automotive industry. Evaluation of nearly a dozen welding variations ultimately led to down selecting a single process based on post-weld quality and performance.

This paper presents two methods of characterizing and describing the formability of tailor welded blanks (TWB). The first method involves using miniature tensile specimens, extracted from TWB weld material, to quantify mechanical properties and material imperfection within TWB welds. This technique combines statistical methods of describing material imperfection together with conventional M-K method modeling techniques to determine safe forming limit diagrams for weld material. The second method involves the use of an extended M-K method modeling technique, which places multiple material thickness and material imperfections inside one overall model of TWB performance. These methods of describing TWB formability and their application to specific aluminum TWB populations are described.

This paper examines the effects of failure modes on the static strength and total energy absorption of aluminum spot-welded samples using experimental, statistical, and analytical approaches. The main failure modes for aluminum spot welds are nugget pullout and interfacial fracture. Two populations of aluminum spot welds were studied. Within each population, coupon configurations of lap shear, cross tension and coach peel were considered. Thirty replicate static strength tests were performed for each coupon configuration. The resulted peak load and energy absorption level associated with each failure mode was studied using statistical models. Next, an analytical model was developed to determine the failure mode of an aluminum resistance spot weld based on stress analysis. It is found that weld size, sheet thickness, and level of weld porosity and defects are the main factors determining the cross tension failure mode for an aluminum spot weld.

This paper presents the coupon performance data of friction stir welded tailor welded blanks (TWBs) joined to a monolithic aluminum sheet by self-piercing rivets (SPRs). Uniaxial tensile tests were performed to characterize the joint strength and the total energy absorption capability of the TWB/monolithic sheet joint assemblies. Cyclic fatigue tests were also conducted to characterize the fatigue behavior and failure mechanisms of the jointed assemblies. This study provides data for the automotive designer to determine whether friction stir welded aluminum TWB/monolithic sheet joints are within the target joint strengths for a particular application if it should be pierced during the assembly process.

Tailor welded blanks are finding increasing application in automotive structures as a powerful method to reduce weight through material minimization. As consumer demand and regulatory pressure direct the automotive industry toward improved fuel efficiency and reduced emissions, aluminum alloys are also becoming an attractive automotive structural material with their potential ability to reduce vehicle weight. The combination of aluminum and tailor welded blanks thus appears attractive as a method to further minimize vehicle weight. Two major concerns regarding the application of aluminum tailor welded blanks are the formability and durability of the weld materials. The current work experimentally and numerically investigates aluminum tailor welded blanks ductility, and experimentally investigates their fatigue resistance.

Due to mismatch of the coefficients of thermal expansion (CTE) of various layers in the PEN (positive/electrolyte/ negative) structures of solid oxide fuel cells (SOFC), thermal stresses and warpage on the PEN are unavoidable due to the temperature changes from the stress-free sintering temperature to room temperature during the PEN manufacturing process. In the meantime, additional mechanical stresses will also be created by mechanical flattening during the stack assembly process. In order to ensure the structural integrity of the cell and stack of SOFC, it is necessary to develop failure criteria for SOFC PEN structures based on the initial flaws occurred during cell sintering and stack assembly.

This paper discusses the technique and problems associated with in-plant and body shop repair of aluminum auto body sheet. Metallic and nonmetallic repair procedures are discussed for in-plant repair of aluminum auto body sheet. An after-market procedure for repair of aluminum sheet is also presented, as well as a new procedure for arc welding of thin gauge aluminum sheet for in-plant and after-market repair.

This paper presents development of a multi-scale material model for a 980 MPa grade transformation induced plasticity (TRIP) steel, subject to a two-step quenching and partitioning heat treatment (QP980), based on integrated computational materials engineering principles (ICME Model). The model combines micro-scale material properties defined by the crystal plasticity theory with the macro-scale mechanical properties, such as flow curves under different loading paths. For an initial microstructure the flow curves of each of the constituent phases (ferrite, austenite, martensite) are computed based on the crystal plasticity theory and the crystal orientation distribution function. Phase properties are then used as an input to a state variable model that computes macro-scale flow curves while accounting for hardening caused by austenite transformation into martensite under different straining paths.

In this paper, the microstructure-based finite element modeling method is used in investigating the loading path dependence of formability of transformation induced plasticity (TRIP) steels. For this purpose, the effects of different loading path on the forming limit diagrams (FLD) of TRIP steels are qualitatively examined using the representative volume element (RVE) of a commercial TRIP800 steel. First, the modeling method was introduced, where a combined isotropic/kinematic hardening rule is adopted for the constituent phases in order to correctly describe the cyclic deformation behaviors of TRIP steels during the forming process with combined loading paths which may include the unloading between the two consecutive loadings. Material parameters for the constituent phases remained the same as those in the authors' previous study [ 1 ] except for some adjustments for the martensite phase due to the introduction of the new combined hardening rule.

Limited room temperature formability hinders the wide-spread use of high strength aluminum alloys in body parts. Forming at warm temperatures or from softer tempers are the current solutions. In this work, our approach is to start with age-hardened sheets from 7xxx and 6xxx family of alloys and improve their formability using local thermomechanical processing only in the regions demanding highest ductility in the forming processes. We achieved local formability improvements with friction stir processing and introduce another process named roller bending-unbending as a concept and showed its feasibility through finite element simulations. Initial results from FSP indicated significant deformation in the processed zones with minimal sheet distortion. FSP also resulted in dynamically recrystallized, fine grained (d < 5 μm) microstructures in the processed regions with textures significantly different from the base material.

Macroscopic constitutive behaviors of aluminum 5052-H38 honeycombs under dynamic inclined loads with respect to the out-of-plane direction are investigated by experiments. The results of the dynamic crush tests indicate that as the impact velocity increases, the normal crush strength increases and the shear strength remains nearly the same for a fixed ratio of the normal to shear displacement rate. The experimental results suggest that the macroscopic yield surface of the honeycomb specimens as a function of the impact velocity under the given dynamic inclined loads is not governed by the isotropic hardening rule of the classical plasticity theory. As the impact velocity increases, the shape of the macroscopic yield surface changes, or more specifically, the curvature of the yield surface increases near the pure compression state.

Since its invention fifteen years ago, Friction Stir Welding (FSW) has found commercial applications in marine, aerospace, rail, and now automotive industries. Development of the FSW process for each new application, however, has remained largely empirical. Few detailed numerical modeling techniques have been developed that can explain and predict important features of the process physics. This is particularly true in the areas of material flow, mixing mechanisms, and void prediction. In this paper we present a novel modeling approach to simulate FSW processes that may have significant advantages over current traditional finite element or finite difference based methods. The proposed model is based on the Smoothed Particle Hydrodynamics (SPH) method.

A new type plated electrode has been developed which shows considerable promise for spot welding mill finish and mechanically cleaned aluminum sheet. This electrode consists of preconditioning the tips of regular Class I and Class II electrodes followed by an inexpensive electroplating of dull nickel. Laboratory data has shown that 2000 spots can be made on mill finished 2036 aluminum using this plated electrode. On wirebrushed 5182-0, 3750 welds were made before failure occurred. This represents a significant increase in tip life compared to tests run using regular copper electrodes. The paper gives details as to how the nickel plated electrodes were developed. This includes results from evaluating other electrode plating and capping materials. The results of tests run using the plated electrodes are included as part of the paper, as well as a discussion as to why the nickel plating works when spot welding aluminum.

Aluminum use for automotive body sheet applications is growing. This growth requires improvement of related joining processes and technology. Resistance spot welding will be one of the major joining technologies used in assembling automobiles. When spot welding aluminum, electrode tip life is limited by tip erosion and pickup of aluminum on the tip. Increasing weld current improves weld strength (to a limit), however this reduces tip life. This study examines the control variables in the resistance spot welding process and offers an improved weld schedule to achieve desired weld properties while maximizing tip life. First, the limits of weld parameters where satisfactory welds can be obtained are determined. A window of tip force and weld current is established for a given material and tip geometry. These limits are used to optimize the weld schedule in terms of tip life. Spot welds fail on the basis of shear strength, button diameter or peel rate.

In this paper, a three-dimensional (3D) microstructure-based finite element modeling method (i.e., extrinsic modeling method) is developed, which can be used in examining the effects of porosity on the ductility/fracture of Mg castings. For this purpose, AM60 Mg tensile samples were generated under high-pressure die-casting in a specially-designed mold. Before the tensile test, the samples were CT-scanned to obtain the pore distributions within the samples. 3D microstructure-based finite element models were then developed based on the obtained actual pore distributions of the gauge area. The input properties for the matrix material were determined by fitting the simulation result to the experimental result of a selected sample, and then used for all the other samples’ simulation. The results show that the ductility and fracture locations predicted from simulations agree well with the experimental results.

Tailored blanks have been produced by a variety of welding processes. Currently, laser welding and mash seam welding are commonly used to produce steel blanks for automotive stampings. Because of the high electrical and thermal conductivity of aluminum, mash seam welding is generally not suitable for this application. Laser welding is currently in the developmental stage for welding aluminum. Reynolds Metals Company is investigating another existing welding technology -- Gas Tungsten Arc Welding (GTAW)--for welding of aluminum tailored blanks. Using the GTAW process, production weld speeds approximating those of laser systems can be obtained. Additionally, good control of weld geometry and quality can be easily attained. This study focuses on GTA welding process parameters for joining various alloys, tempers, and thickness of aluminum. Additionally, performance of welded joints in terms of strength, ductility, and formability are discussed.