Search Results

It is essential to note that cybersecurity threats not only arise from inherent protocol defects but also consider software implementation vulnerabilities.

UNECE R155 explicitly references ISO/SAE 21434 and mandates a certified cybersecurity management system (CSMS) as a prerequisite for automotive manufacturers to achieve vehicle type approval and sell new vehicle types. ...However, the gap in the CSMS framework is a lack in a standardized system that provides guidance and common criteria for automakers to measure a vehicle’s level of compliance and compute a publicly accepted cybersecurity rating. To help establish increased consumer confidence, OEMs and smart mobility stakeholders could take additional proactive steps to ensure the safety and security of their products. ...This paper addresses the above requirement and discusses the cybersecurity rating framework (CSRF) that could establish a framework for rating vehicle cybersecurity by standardizing the measurement criteria, parameter vectors, process, and tools.

3D, no waiting! Two companies' latest techniques take additive manufacturing to the next level. Reducing the battery materials supply risk "Adjacent" strategies such as improving vehicle efficiency and advancing promising chemistries can mitigate the risks associated with today's favored battery materials. A formula for real-world experience Student engineers soak up the lessons from an army of auto-industry and racing volunteers at Formula SAE Michigan. Editorial It's about more than a connector Supplier Eye The New Wild West SAE to standardize Tesla's NACS charging connector Report: Suppliers need more info sooner on OEM EV plans Mazda again producing rotary engines Toyota to build new battery lab in Michigan New Lexus SUVs: GX for show, TX for dough? VW introduces seminal ID.Buzz in three-row layout Spotlight: 3D Printing/Additive Manufacturing Equipment & Software

Abstract The secure boot has successfully protected systems from executing untrusted software (SW), but low-power controllers lack sufficient time to check every memory cell while satisfying real-time functional safety requirements. Automotive controllers need to maintain security through multiple cycles of remote, unsupervised operation and safely reach a secure state when an anomaly is detected. To accelerate the boot time, we propose Sliced Secure Boot: build fingerprints by slicing orthogonally through memory blocks, protect each cell with a reusable fingerprint using a reproducible pattern with sufficient entropy, and randomly check one fingerprint pattern during boot. We do not claim that sampling offers equivalent protection to exhaustive checks but demonstrate that careful sampling can provide a sufficient level of detection while maintaining compatibility with both startup time and functional safety requirements.

Finding solutions for Sustainable Mobility SAE created its SMS team to help industry rethink itself as part of the new industrial revolution and the EV transition within it. Debarbonizing the EV battery supply chain Altering manufacturing processes and using a much higher percentage of low emission energy can help the battery industry get greener rapidly, according to a new McKinsey & Co. report. Europe's dust buster The pending Euro 7 vehicle-emissions regulations include a significant new sustainability wrinkle: first-ever restrictions for PM emissions from brakes. E-fueling for the future The development of carbon-neutral e-fuels enjoyed a major boost from European regulators, but production cost and scale remain issues. Fuels to transition the global legacy fleet The EV bandwagon has obscured potential solutions for decarbon-izing the enormous global ICE legacy fleet.

The new generation vehicles these days are managed by networked controllers. A large portion of the networks is planned with more security which has recently roused researchers to exhibit various attacks against the system. This paper talks about the liabilities of the Controller Area Network (CAN) inside In-vehicle communication protocol and a few potentials that could take due advantage of it. Moreover, this paper presents a few security measures proposed in the present examination status to defeat the attacks. In any case, the fundamental objective of this paper is to feature a comprehensive methodology known as Intrusion Detection System (IDS), which has been a significant device in getting network data in systems over many years. To the best of our insight, there is no recorded writing on a through outline of IDS execution explicitly in the CAN transport network system.

Using a wireless medium for tractor-trailer communication will bring new cybersecurity challenges and requirements which requires new development and lifecycle considerations.

CAN bus network proved to be efficient and dynamic for small compact cars as well as heavy-duty vehicles (HDV). However, HDVs are more susceptible to malicious attacks due to lack of security in their intra-vehicle communication protocols. SAE proposed a new standard named J1939-91C for CAN-FD networks which provides methods for establishing trust and securing mutual messages with optional encryption. J1939-91C ensures message authenticity, integrity, and confidentiality by implementing complex cryptographic operations including hash functions and random key generation. In this paper, the three main phases of J1939-91C, i.e., Network Formation, Rekeying, and Message Exchange, are simulated and tested on Electronic Control Units (ECUs) supporting CAN-FD network. Numerous test vectors were generated and validated to support SAE J1939-91C. The mentioned vectors were produced by simulating different encryption and hashing algorithms with variable message and key lengths.

Cybersecurity (CS) is crucial and significantly important in every product that is connected to the network/internet. ...Hence making it very important to guarantee that every single connected device shall have cybersecurity measures implemented to ensure the safety of the entire system. Looking into the forecasted worldwide growth in the electric vehicles (EV’s) segment, CS researchers have recently identified several vulnerabilities that exist in EV’s, electric vehicle supply equipment (EVSE) devices, communications to EVs, and upstream services, such as EVSE vendor cloud services, third party systems, and grid operators. ...Additional processes have been defined in the process reference and assessment model for the CS engineering in order to incorporate the cybersecurity related processes in the ASPICE scope. This paper aims at providing a model & brief overview to establish a correlation between the ASPICE, ISO/SAE 21434 and the ISO 26262 functional safety (FS) standards for development of a secured cybersecurity software with all the considerations that an organization can undertake.

R1T Exposed! A comprehensive teardown of Rivian's pioneering electric pickup reveals praiseworthy build quality, innovative thinking…and some lapses in manufacturability. EVs drive NVH materials innovation Skateboard platforms, high-frequency motor noise push lower dB thresholds and new countermeasure solutions. Optimizing design for additive manufacturing Avoiding the pitfalls of 3D printing requires knowing the process limitations - and how to work around them. An expert at a leading AM specialist shares insights on getting it right. Real-time processors help drive the zonal E/E revolution With its new generation of software-compatible processors, NXP aims to accelerate systems consolidation and performance.

Supplier Eye Inflation ignites another supplier squeeze Toyota reinvesting in collaborative safety research SAE and NREL partner to strengthen EV-charging cybersecurity Expanding the 'bubble' of cabin acoustics 2022 Ford F-150 Lightning redefines the pickup paradigm GM's Hummer EV is like nothing else

Additionally, we go beyond the attack vectors listed in UN-R155 - using our own analysis, experience and insights, we explored other attack vectors that will also affect vehicle cybersecurity.

Vehicles have more connectivity options now-a-days and these increasing connection options are giving more chances for an intruder to exploit the system. So, the vehicle manufacturers need to make the ECU in the vehicle more secure. To make the system secure, the embedded system must secure all the assets in the system. Examples of assets are Software, Kernel or Operating system, cryptographic Keys, Passwords, user data, etc. In this, securing the Kernel is extremely important as an intruder can even exploit the operating system characteristics just by changing the kernel code without introducing a trojan in the system. Also, the Kernel is the one entity that manages all permissions, so, if the kernel is hacked, these permissions also get compromised. The proposed approach is to make the kernel secure by doing the integrity check periodically of the kernel code loaded into the main memory of the system.

In agriculture industry, increasing use of Vehicle Internet of Things (IoT), telematics and emerging technologies are resulting in smarter machines with connected solutions. Inter and Intra Communication with vehicle to vehicle and inside vehicle - Electronic Control Unit (ECU) to ECU or ECU (Electronic Control Unit) to sensor, requirement for flow of data increased in-turn resulting in increased need for secure communication. In this paper, we focus on functional verification and validation of secure Controller Area Network (CAN) for intra vehicular communication to establish confidentiality, integrity, authenticity, and freshness of data, supporting safety, advanced automation, protection of sensitive data and IP (Intellectual Property) protection. Network security algorithms and software security processes are the layers supporting to achieve our cause.

In conjunction with an increasing number of related laws and regulations (such as UNECE R155 and ISO 21434), these drive security requirements in different domains and areas. 2 In this paper we examine the upcoming trends in EE architectures and investigate the underlying cyber-security threats and corresponding security requirements that lead to potential requirements for “Automotive Embedded Hardware Trust Anchors” (AEHTA).

Legacy electronic control units are, nowadays, required to implement cybersecurity measures, but they often do not have all the elements that are necessary to realize industry-standard cybersecurity controls. ...Legacy electronic control units are, nowadays, required to implement cybersecurity measures, but they often do not have all the elements that are necessary to realize industry-standard cybersecurity controls. For example, they may not have hardware cryptographic accelerators, segregated areas of memory for storing keys, or one-time programmable memory areas. ...While the UDS service $27 (Security Access) has a reputation for poor cybersecurity, there is nothing inherent in the way it operates which prevents a secure access-control from being implemented.

The underlying systems are susceptible to safety and cybersecurity attacks as the involved ECUs are interconnected. The security attacks can lead to disrupting the safe operation of the vehicle while causing injury to the passengers. ...Consequently, the functional safety requirements and cybersecurity requirements can be aligned with each other. In this article, a case study of the application of the THARA framework is presented through the risk analysis of safety and security threats applicable to the rearview camera (RVC) feature of the vehicle.

High on hydrogen Through its Symbio joint venture with Michelin, Faurecia expands far beyond its interior-systems base into the fuel-cell future. Simulating a faster route to ADAS and AV validation With its new cloud-based Simphera platform, dSpace responds to demand from global automated-vehicle development teams to help manage their expanding, complex workload. Innovating the methanol fuel cell Using methanol as the source fuel provides an alternative to a gaseous-hydrogen distribution and storage infrastructure, among other potential benefits. Engineering the 2022 Toyota Tundra Chief Engineer Mike Sweers talks structure, materials and a different approach to hybrid power.

In order to enhance customer experience [5] and to reduce time to market, the manufacturers are constantly in need of being able to update software/firmware of the Electronic Control units (ECU) when the vehicle is in field operations. The updates could be a bug fix or a new feature release. Until the recent years, the updation of software/firmware used to be done using a physical hardwired connection to the Vehicle in a workshop. However, with the element of connectivity being added to the vehicle, the updation of software can be done remotely and wirelessly over the air using a feature called Flash over the air (FOTA) [2] and Software over the air (SOTA) [2]. In order to safeguard the telematics [3] ECU from tampering or hacking, the manufacturers are doing away with the ports on the underlying hardware through which manual flashing used to be done. This means that, the only option available to flash or update the ECU is using FOTA/SOTA.