Search Results

Electrifying Aviation: The Path to Decarbonizing the Skies /Electric aviation mirrors the early stages of the electric vehicle revolution Advances in Military Avionics Technologies Create New Challenges for RF Test and Measurement Plasma Electrolytic Oxidation: The Future of Lightweight Designs in Aerospace and Defense Advanced RF Simulation Reduces Cost and Schedule Risk Assure 5G NTN Performance Before Launch In the complex and quickly evolving 5G NTN landscape, simulating, emulating, and evaluating RF systems boosts mission success. Qualification of Multi-Channel Direction Finding Radar Receivers in The Lab Bullet Impact Testing of Ammunition and Explosives at Picatinny Arsenal A bullet impact (BI) test for evaluating the response of energetically loaded items has been established at the U.S. Army Combat Capabilities Command (DEVCOM) Armaments Center (AC) Explosive Development Facility.

What system Designers Should Know About MOSA Standards Microtube Technology A Catalyst for Next-Gen Aerospace Thermal Control Space Industry Test Challenges Advancing Metrology at Mach Speed Drone Mounted Inspection Breaks Barriers for F-35 RF Technology Helps Connect Avionics Systems Using Open-Cavity Plastic Packages in Avionics Applications Electronic Prognostics - A Case Study Using Global Positioning System (GPS) Prognostic health management (PHM) of electronic systems presents challenges traditionally viewed as either insurmountable or not worth the cost of pursuit, but recent changes in weapons platform acquisition and support requirements has spurred renewed interest in electronics PHM, revealing possible applications, accessible data sources, and previously unexplored predictive techniques.

Powering Better Battlefield Drones Using Low-Frequency Broadband Sonar on UUVs Experimenting in Realistic Environments Gets NewTechnology to Warfighters Designing Rugged SWaP-Optimized MOSA Solutions for UUVs Does Your UAV Program Need a Transponder? Understanding the Requirements and Guidelines Developing New Anti-Drone Radar Technology Deceiving the Enemy: These Are the Drones You Are Looking For By developing UAVs for physical deception roles to shape an adversary's ability to visually observe and orient to situations, the US military can decrease risk to air and ground combatants during mission execution by causing adversaries to expend resources, delay their reactions, or react incorrectly to tactical situations.

Radiation-Tolerant FPGAs Solve Spacecraft Design Challenges Thermal Management for Directed Energy Weapons New Diamond Super-Material Enhances Aircraft Survivability Development of a Secure Private Neural Network Capability From DC to Daylight - How Innovations in Microwave Absorbers Shield the Warfighter Army Advances Materials for New Low-Profile Antenna Directed-Energy System to Defeat Small Unmanned Aircraft System Swarms New weapons technology is needed to combat the proliferation of small unmanned aircraft systems (sUAS), miniaturization of sensor technology, and advancement of UAS swarm logic that will enable swarms of sUAS to threaten US airbases by the 2025 timeframe.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

High-Reliability Capacitors When the Mission Just Can't Fail WIAMan High-Tech Test Lab Focuses on Saving Soldiers' Lives Improving the Surface Finish of Additive Manufactured Parts A new chemical immersion treatment could revolutionise the aerospace industry Using Thermoplastic Composites for Aerospace Applications Identifying and Isolating Signals Using Radio Frequency Photonics Bioinspired Surface Treatments for Improved Decontamination: Commercial Products Investigation seeks to determine which coatings shed fluids most effectively. Mechanical Characterization and Finite Element Implementation of the Soft Materials Used in a Novel Anthropometric Test Device for Simulating Underbody Blast Loading Understanding the mechanical behavior of components made from eight soft polymer materials is necessary to ensure the predictive capability of WIAMan FE models.

Using Thermal Simulation to Model the Effects of Wind on the Mars Curiosity Rover Quality and Validation of Digital Designs for Aerospace and Defense Scaling LiDAR Optical Payloads from Drones to Miniature UAVs Using Sintered Fiber Metal Composites for Aircraft Acoustic Attenuation GaN Breaks Barriers RF Power Amplifiers Go Wide and High Test System Ensures Flawless Performance of Military RF Devices The Impact of Video Compression on Remote Cardiac Pulse Measurement Using Imaging Photoplethysmography Remote physiological measurement technique leverages digital cameras to recover the blood volume pulse from the human body. Sensitivity Simulation of Compressed Sensing Based Electronic Warfare Receiver Using Orthogonal Matching Pursuit Algorithm Calculate the sensitivity of a CS based EW receiver using two modulation schemes.

Knowledge wins at 2017 Formula SAE Lincoln The University of Pennsylvania and Texas A&M win the Electric and Internal Combustion Classes, respectively. Flying high at SAE Aero Design New for the twin 2017 competitions in Texas and Florida was a requirement for planes registered in the Regular Class to carry "passengers." Pedal to the metal at Formula SAE Michigan More than 100 university teams compete in this premier student racecar design competition combining static and dynamic events. Removing bumps on the path to fully automated driving Inaugural workshop for new AutoDrive Challenge student competition held at SAE World Headquarters.

Alternative fuels and challenges Automotive powertrain development: virtually-connected hardware co-simulation Functional Safety-progressing towards safer mobility Electric rockets and the future of satellite propulsion Achates powers toward production A potential ICE game-changer, the Achates OP engine is being tooled up for production at one OEM while a new 2.7-L triple for light-truck demonstrations enters the build phase. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.

Small Form Factor Embedded Systems New Technologies Drive Diverse Solutions Making Laser Weapons a Reality Modelling and Simulation Tools for Systems Integration on Aircraft Rotorcraft Anti-Icing Systems Redundant Transmitting System in Aircraft (RTSA) Cassini Stays in Touch with NASA's Radio Science Subsystem Laser Integration on Silicon Photonic Circuits Through Transfer Printing New fabrication approach allows the massively parallel transfer of III-V coupons to a silicon photonic target wafer. High Energy Computed Tomographic Inspection of Munitions Inspection system provides additional level of quality assurance for R&D, reverse engineering, and malfunction investigations. Terahertz (THz) Radar: A Solution for Degraded Visibility Environments (DVE) Operating at higher frequencies than other types of radar produces tighter beams and finer resolution. Imaging Detonations of Explosives Using high-speed camera pyrometers to measure and map fireball/shock expansion velocities.

Interoperability Standards Pave the Way for Modular Robotic Manipulators Solar Powering UAVs Deploying COTS Subsystems in UUVs Developing a Multi-Modal UGV Robot Control Interface Fast-Tracking Autonomous Vehicles with Simulation Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation

Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality

Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.

Digital Design Tools Simulating Thermal Expansion in Composites with Expanded Metal Foil for Lightning Protection Rugged Computing Designing VME Power Systems with Standard Modules Optical Sensors Optical Ice Sensors for UAVs Rotorcraft Technology Rotorcraft Icing Computational Tool Development RF & Microwave Technology Curled RF MEMS Switches for On-Chip Design: Design Software Supports BAE System's Mixed-Signal Chip Design

Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.

Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.

Oil debris monitoring in aero engines In a gas turbine engine, small particles or "chips" are generated at the point of wear, serving as an advanced warning that catastrophic failure will occur if the wear is not addressed. Health monitoring systems, such as oil debris monitoring, are used to find these small particles so that the wear can be resolved before it's too late. Indigenous powertrain development Customer needs and expectations on drivability, fuel economy, and safety has pushed Indian and multinational OEMs to think about the development of powertrains and gearboxes for local needs with global standards. The next wave of crash simulation As computing speed has improved and software itself has made significant speed and performance gains with each release, modeling tools are now quick enough to build high-quality, large, high-detail vehicle models in a very efficient manner.

Touch-less control coming to cars Use of proximity and gesture-recognition systems in auto cockpits could rise fifty-fold within a decade. Forming a strong bond Multi-material vehicles are becoming more prevalent as automakers attempt to reduce vehicle weight and boost fuel efficiency. Selecting the proper adhesive is critical when bonding dissimilar materials. SAE 2014 World Congress preview special section: 'Creating New Possibilities' Host company Hyundai and Tier 1 Strategic Partner, Delphi, established "Creating New Possibilities" as the theme for this year's premier engineering event taking place April 8-10 in Detroit's Cobo Center. This special Congress preview section uncovers some of those possibilities, featuring insights from the event's executive leadership; details of a Delphi/Hyundai advanced engine program; highlights from the technical program in the areas of powertrain, materials, testing and simulation, electronics, interiors, and body/chassis; and more.

'Infernal' combustion no more Continuous improvements to the 130-year-old ICE aim to keep conventional engines ahead of electric drive. Alternative fuels tested at altitude Federal government researchers in Canada tested certain alternative fuels at simulated altitudes and found that they do offer some benefit.

Solving the carbon problem Promoting a sustainable future for the transportation industry will benefit the welfare of humankind. My Baja SAE journey Every day, I realize how much Baja SAE has taught me-both in life and in engineering. Honda unveils next-gen motorcycle powertrains New engines designed for low-speed torque, fuel efficiency, and riding 'character' are coupled with new DCT and CVT transmissions. Three rules of career management for 2012 Do you have a career management plan to ensure your career growth in times of corporate chaos?