Search Results

Training / Education

Accelerated Test Methods for Ground and Aerospace Vehicle Development

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development.  Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater.

Training / Education

Tire and Wheel Safety Issues

One of the most important safety critical components on cars, trucks, and aircraft is the pneumatic tire. Vehicle tires primarily control stopping distances on wet and dry roads or runways and strongly influence over-steer/under-steer behavior in handling maneuvers of cars and trucks. The inflated tire-wheel assembly also acts as a pressure vessel that releases a large amount of energy when catastrophically deflated. The tire can also serve as a fulcrum, both directly and indirectly, in contributing to vehicle rollover. This course covers these facets of tire safety phenomena.

Training / Education

Creating and Managing a Product Compliance Program

This two-day course presents a process development methodology that can be used repeatedly as new compliance requirements emerge.  You will learn best practices in creating a compliance program for your products and markets, and how to use this program at all stages of product development and production.  Sample spreadsheets will be used to demonstrate tailoring the program to your product, your markets, and your organization.  A properly managed compliance program simplifies the certification or approval of your product, and ensures that you regularly apply and document good engineering practices for product safety and reliability.

Training / Education

Fundamentals of Functional Gaging and Measurement - Foundational Level

This 2-day foundational-level course teaches functional gaging design. It covers how to verify part dimensional requirements using functional gages and other measurement methods. The course offers an explanation of metrology, the roles of the metrologist and inspector, measurement uncertainty, inspection tools, functional gages, inspection planning and reporting, and simulating datums. Each participant receives: A Functional Gaging and Measurement Workbook and  Drawing handouts. Newly acquired learning is reinforced throughout the class with numerous practice exercises. 

Training / Education

Fundamentals of GD&T for Inspectors - Foundational Level

This 2-day foundational-level course builds on geometric dimensioning and tolerancing fundamentals and teaches an introduction of how to inspect GD&T requirements.  The course offers an explanation of the geometric symbols, rules, and concepts, the datum system, and how to inspect GD&T requirements using tools from the four categories of inspection tools (CMM; comparison instruments and fixed gages; hand tools and open set up; and production gaging systems).

Training / Education

EV Motor Design Analysis and Test Verification

This course, designed for EV motor engineers and graduate participants, systematically introduces EV motor design analysis and test verification. Combined with engineering practice, it discusses typical EV motor design cases and practical issues related to EV motor technology, aiming to broaden the horizon of EV motor design engineers and improve their problem-solving skills.

Training / Education

Euro NCAP’s New Rating Scheme – 2026 & Beyond

SAE International will host a series of webinars that will cover the recently published and completely new Euro NCAP Rating Scheme for 2026 and beyond. This rating scheme supports the Euro NCAP Vision 2030 Roadmap. e-Learning coming soon!

Training / Education

Product Development for AV and EV Reliability

According to NHTSA, there were 932 vehicle recalls in the United States in 2022, affecting approximately 31 million vehicles; 39 electric vehicle recalls affecting more than 1.3 million vehicles, and 56 ADAS recalls affecting more than 4.7 million vehicles. Furthermore, Warranty Week reports that Worldwide Auto Manufacturers allocated a total of $54.7 billion for future warranty repairs or $670 per vehicle sold in 2022. 2023 Consumer Report indicates that Electrical Vehicles have 79% more reliability issues than ICE vehicles.

Training / Education

Guidance for Software Tool Qualification (DO-330)

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Software technology for airborne and ground-based operations has changed and software development teams frequently need guidance on tools for the development, verification, transformation, testing, modification and control of software programs. Developed in support of DO-178C or CO-278A, RTCA DO-330 explains the process and objectives for qualifying software tools and facilitates the compliance of airborne products.

Training / Education

The Nature of Automated Vehicle Safety Will SAE Level 5 Ever Be Achieved?

The automated vehicle industry has been busy designing, developing, and deploying several self driving vehicles and services in the last few years. However, much of the outcomes and the overall outlook of the vehicle and services, such as robotaxis, are not great. Customers and stakeholders complain that the level of automation is low, mostly SAE Levels 1, 2, and very little of Level 3. It appears that Level 4 is far out in the horizon and many wonder if Level 5 is actually achievable.

Training / Education

A Primer on Regulations and Liability Considerations for HAV’s

Potential regulations surrounding the development, testing and commercial launch of Highly Automated Vehicles and possible liability exposure for the manufacturing and operation of Highly Automated Vehicles are fluid and changing areas, that will continue to evolve over the next several years. The first half of this course reviews where regulations are at the state and federal levels, what actions are currently under consideration, how current regulations will need to change to accommodate HAV’s, and how and when new regulations might be implemented. The second half covers both common law and strict liability and how it may apply to HAV’s.

Training / Education

Introduction to Car Hacking with CANbus

2024-11-13

Vehicle cybersecurity vulnerabilities could impact a vehicle's safe operation. Therefore, engineers should ensure that systems are designed free of unreasonable risks to motor vehicle safety, including those that may result due to existence of potential cybersecurity vulnerabilities. The automotive industry is making vehicle cybersecurity an organizational priority.

Training / Education

Applying Automotive EDR Data to Traffic Crash Reconstruction

2024-10-22

EDR's were first installed in 1994 and are now installed in 99% of new light vehicles sold in the US. In the US EDR’s are not required, but vehicles with EDR’s made after 9/1/2012 must meet minimum standardized content requirements of 49 CFR, Part 563 including speed, throttle, brake on/off and Delta V.  Data must be retrievable with a publicly available tool.  Only a few manufacturers install EDR’s worldwide currently, but the EU and China are adopting regulations to require them in the next few years.  

Training / Education

Fundamentals of Motor Vehicle Fire Investigation

2024-09-24

The manner in which a motor vehicle fire is initiated and subsequently spreads is dependent on a number of complex, interdependent, phenomena including combustion kinetics, heat transfer and fluid dynamics. Because the damage caused by a fire is coupled to these phenomena, damage patterns can sometimes be used to understand certain characteristics about the fire. In many cases, the goal is to determine the cause and origin of the fire.

Training / Education

ADAS Application Automatic Emergency Braking

2024-09-19

Active safety and (ADAS) are now being introduced to the marketplace as they serve as key enablers for anticipated autonomous driving systems. Automatic emergency braking (AEB) is one ADAS application which is either in the marketplace presently or under development as nearly all automakers have pledged to offer this technology by the year 2022. This one-day course is designed to provide an overview of the typical ADAS AEB system from multiple perspectives.

Training / Education

Vehicle Crash Reconstruction Principles and Technology

2024-09-17

Crash reconstruction is a scientific process that utilizes principles of physics and empirical data to analyze the physical, electronic, video, audio, and testimonial evidence from a crash to determine how and why the crash occurred. This course will introduce this reconstruction process as it gets applied to various crash types - in-line and intersection collisions, pedestrian collisions, motorcycle crashes, rollover crashes, and heavy truck crashes. Methods of evidence documentation will be covered. Analysis methods will also be presented for electronic data from event data recorders and for video.

Training / Education

Injuries, Anatomy, Biomechanics & Federal Regulation

2024-09-09

Safety continues to be one of the most important factors in motor vehicle design, manufacturing, and marketing.  This course provides a comprehensive overview of these critical automotive safety considerations: injury and anatomy; human tolerance and biomechanics; occupant protection; testing; and federal legislation. The knowledge shared at this course enables participants to be more aware of safety considerations and to better understand and interact with safety experts. This course has been approved by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR) for 18 Continuing Education Units (CEUs).

Training / Education

Photogrammetry and Analysis of Digital Media

2024-08-28

Photographs and video recordings of vehicle crashes and accident sites are more prevalent than ever, with dash mounted cameras, surveillance footage, and personal cell phones now ubiquitous. The information contained in these pictures and videos provide critical information to understanding how crashes occurred, and  analyze physical evidence. This course teaches the theory and techniques for getting the most out of digital media, including correctly processing raw video and photographs, correcting for lens distortion, and using photogrammetric techniques to convert the information in digital media to usable scaled three-dimensional data.

Training / Education

Tire Forensics and Markings

2024-06-24

This course introduces basic tire mechanics, including tire construction components based on application type, required sidewall stamping in accordance with DoT/ECE regulations, tread patterns, regulatory and research testing on quality, tire inspections and basic tire failure identification. The course will provide you with information that you can use immediately on-the-job and apply to your own vehicle. This course is practical in nature and supplemented with samples and hands-on activities.

Training / Education

Fundamentals of High Voltage xEV, Safety, and PPE

2024-06-20

Do you know what personal protective equipment (PPE), tools, and instruments are needed to keep you safe around high voltage (HV) vehicles? Are you aware of how to protect yourself or your employees when working around high voltage systems and platforms? Safety is paramount when working around any type of high voltage. As electric vehicles (EV) and EV fleets become more prevalent, the critical need for OEMs, suppliers, companies, and organizations to provide comprehensive safety training for teams working with or around xEV systems and platforms increases.