Search Results

Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.

The big engine that could With the stringent EPA 2015 regulations on large diesel engines for locomotive, marine, and stationary generator applications, the need for NOx reduction via urea SCR catalyst arises given the proven performance of urea SCR. Monitoring hydraulics Component producers and vehicle service providers offer their views of hydraulic diagnostics as the industry moves toward real-time, intelligent health monitoring, predictive failure software algorithms, and wireless notification. Engine management expands from minute movements to full vehicle Electronic controls grow in complexity as engine designers extend their scope to include hydraulics.

After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Biofuel opportunities and pitfalls Annual growth in biofuels has been strong but is expected to slow in the near future. User interfaces going mainstream Off-highway HMIs use consumer technologies to add functions, simplify tasks. Reducing the environmental impact of hydraulic systems OEMS and their suppliers are creating new hydraulic systems and components, using new fluids and remanufacturing to save energy and reduce the environmental impact of off-highway equipment. Multiple controllers add to EV complexity Model-based design has revolutionized the way products are developed, with design shifting from parts to the whole.

Simulating off-highway hybrids With customers squeezed by fuel costs, off-highway OEMs are showing some interest in developing hybrid equipment. CAE simulation tools are needed because of lack of experience with such devices. Their functional complexity requires control system simulation throughout their lives. A hose is a hose is a hose Researchers develop a method for the precise mounting of a hydraulic hose model. Integrity sensing for safety Researchers from Purdue developed a capacitance-based method for monitoring the integrity of tires, hoses, and other polymeric products during manufacturing and throughout the useful product life.

Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks Small engine landscape Kubota engineers developed new small-displacement engines that adopt a common-rail system while optimizing the combustion system and injection characteristics. Sensitive to safety A growing number of digital sensors are among the tools being used to make sure failures are rare and injuries are even more infrequent.

Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.

Tackling biodiesel's technical challenges Caterpillar researchers are working to mitigate biodiesel's negative effects on engine components and aftertreatment systems. More for less Telematic systems are offering more features and functions for lower prices. Improving actuation speed and controllability With high-speed hydraulic proportional valves, the performance of existing cam phasing systems can be improved or the actuation mechanisms can be applied directly to engine valve actuation.

Editorial AVs, data and 'surveillance capitalism' SAE AV Activities SAE launches Office of Automation The Navigator Lessons from the 737 Max-8 debacle Scorecard Waymo, GM and Ford pegged as autonomous leaders Designs to Dye for: Autonomy's New-Materials Revolution From pineapples to bacteria, Envisage's research is focused on new-mobility's 'inside' story. Dining on Data Processing, in real-time, the enormous data stream that's flowing through AVs is increasingly the job of NVIDIA's mighty GPUs. Danny Shapiro relishes the feast. New Performance Metrics for Lidar Frame-rate measurement is so yesterday.

Editorial It's more than just a magazine The Navigator Needed: a step beyond STEM SAE AV Activities A listing of SAE International's autonomous vehicle-related offerings across the organization. Autonomy for the Masses Ford Autonomous Vehicles LLC aims to do for AVs what the Model T did for just about everyone. CEO Sherif Marakby explains. Speeding Thermal Analysis for Autonomous EVs Solving thermal challenges is vital to AEV development. Siemens PLM's new Simcenter integrated simulation package offers a high-fidelity, easy-to-use solution. New Mobility's Mega-Mappers Most believe ultrahigh-definition mapping is crucial to make high-level automated driving possible. Developing these maps is a huge undertaking-one that's enjoying a massive investment of money and talent. From a Blip to a Boom Automotive radar rides the 77-GHz technology wave toward greater capability and vehicle safety.

Editorial The consolidation plot thickens The Navigator As the world turns to C-V2X, Europe picks WiFi Complexity of Autonomous-Systems Simulation, Validation Soars to the Clouds Scalable, cloud-based architectures are gaining greater acceptance for simulating and testing the myriad development aspects of automated driving. Connectivity Solutions for AVs The promises of fully connected autonomous vehicles are great, but so are the challenges. What M&E Can Teach the AV Industry About Data Media & entertainment offers important learnings on data retention, management, scalability and security. The Rodney Dangerfield of Automated-Driving Sensors Radar and lidar get all the attention, but Inertial Measurement Units are the backbone of sensor fusion. Suppliers are scrambling to make IMUs more accurate-and much less expensive. The Sense-itive Side of Autonomous Vehicles BASF is exploring how specific materials-and even paint colors and finishes-can improve the capabilities of AV sensors.

Steel sector aids sustainability Volvo Group partners with SSAB on 'green steel' for off-highway machines and with Ovako for access to fossil-free hydrogen. CV autonomy: Picking the 'low-hanging fruit' Increasingly automated commercial vehicles offer challenges and opportunities in simulation, data management and standardization. Developing EV-specific lubes As electric-vehicle technology accelerates, dedicated e-fluids are necessary to maintain proper levels of drivetrain performance. Editorial Real-world emphasis on electric Mahle, Liebherr develop active pre-chamber for hydrogen ICE ABS ramps up commercial-vehicle battery-pack assembly Navistar updates A26 engine, improves FE by 4% Bosch debuts new CV-specific electric motor and inverter Western Star adds 'weight sensitive' 47X to vocational lineup Hyundai CE launches next-gen electric forklift Q&A Mahle's Laurent Art discusses thermal-management challenges, solutions for battery and fuel-cell electric commercial vehicles.

Defending the heavy-vehicle cyber domain Cybersecurity experts explained at SAE COMVEC 2021 how they're preparing the next generation of thwarters to protect increasingly electrified, connected and automated trucks. Digitalization of product engineering ESI proposes "sustainable" product development via virtual prototyping to ensure operational safety and comfort for off-highway machines. Developing a next-gen VGT Engineers from Mitsubishi Heavy Industries refine the design of a variable geometry turbocharger for commercial vehicles. Editorial Insightful comments from COMVEC Lidar lets Vermeer automate baling processes Extending a Wankel future on hydrogen fuel Next-gen HMI crucial for ADAS efficacy Altair honors weight-saving innovations A bevy of battery and fuel-cell electric truck reveals Q&A Dr. Philip Stephenson, general manager of the PACCAR Technical Center, hones in on the potential efficacy of E-fuels, commercial-vehicle battery-swapping.

No shortage of challenges Supply chain struggles join perennial challenges for Cummins' off-highway business, namely meeting shifting global emissions standards and satisfying emerging technology trends. Batteries not the only route to EV efficiency Allison CTO stresses efficiency and safety of propulsion units also are critical to reducing cost, improving performance and ultimately winning over customers. Batteries go underground A Saft expert evaluates various Li-ion chemistries and strategies - battery swapping vs. fast charging - for electric mining vehicles. Platooning: an evolving pathway to full autonomy Human-guided convoys can provide real-world benefits sooner than individual driverless trucks, but safety and operational issues still need to be resolved to optimize platoon configurations. Supplier Directory Complete listing of industry suppliers categorized by technology area.

Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.

Hydrostatic transmissions in conventional envelopes Kubota designed a hydrostatic transmission for a compact tractor to improve operator control and increase efficiency and productivity. Design of a hydraulic free-piston engine Dutch companies Noax and Innas have developed an engine in which nearly all combustion energy is directly converted into hydraulic energy. Optimizing tractive performance Canadian researchers correlate analytical predictions and experimental data to determine that the proper matching of front- and rear-tire sizes, aswell as careful control of inflation pressure and normal load of the tires, is necessary to achieve optimum tractive performance of four-wheel-drive tractors. Actively suspending off-road vehicles The University of Texas Center for Electromechanics evaluated a retrofit electromechanical active suspension that s hows promise of improved cross-country mobility for military vehicles.

Electrohydraulic engineers embrace integration Software improvements help both engineers and operators as architectures evolve. Indestructible from the start OEMs and suppliers are investing in testing equipment, facilities, and software to ensure proper performance of components prior to being placed in the field. To 2010 and beyond Engineers working on emissions-control systems for heavy-duty engines already are preparing for ever more stringent regulations later next decade. Top Technologies of 2008 The editors look back at some of the most significant technological innovations during the past year according to readers.

Operator station innovations Off-highway engineers work hard to provide comfort, ease of operation, and reliability to users. As an added challenge, they must design for operators who can spend an entire day working hard in their cab. Designing online Major developments in internet-based technologies are profoundly changing the engineering/design process, revolutionizing the way OEMs and suppliers do business, and speeding the industry's time-to-market. FEA simulation of an electrohydraulic system Researchers from the Milwaukee School of Engineering provide an accurate model of a typical magentic actuator Predicting injury in forklift upsets Researchers from the Biomechanics Institute present test results that demonstrate operators can prevent ejection and injury from a forklift if they are lap-belted and have either a winged seat or hip restraint.

Next-generation power Additional benefits for commercial customers may drive hybrid technology adoption. Shake and bake: a recipe for testing Vehicles, components endure much in-lab abuse before they enter the commercial-vehicle market. Fuel for thought The performance and emissions of a stationary single-cylinder diesel engine is evaluated using an ethanol blend with diesel and jet fuels.