Search Results

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

In search of the perfect burn The simultaneous download pressures on NOx and PM continue to make research into higher injection pressures and alternative combustion solutions such as homogenous-charge compression ignition attractive. One way to stop a train A new self-energizing electrohydraulic brake offers the advantages of hydraulic brake actuation without the disadvantages of a centralized hydraulic power supply. A model combustion: from art to science Analysis tools, advanced hardware provide insight into combustion process, refining the cylinder's 'big bang.' The datalinked vehicle In the fields and on the job site with GPS.

The man challenges of Tier 4 engineering Cutting and controlling emissions are the surface goals, but designers must also manage to cut and control costs, while adding complexity. A cool look at heat protection CFD is used to predict flow and thermal fields within the engine compartment both at steady state and transient conditions. Hushing hydraulics Researchers from the Georgia Institute of Technology put their energies into novel, compact devices for reducing fluid-borne noise.

Simulating air-conditioning performance A computer program developed by Modine Climate Systems and Modelogics helps determine and optimize air-conditioning system performance. Reduced mass haul-truck design concepts Liebherr Mining trucks adopted a reduced structural mass approach to convert unladen weight directly into payload, while simultaneously incorporating state-of-the-art driveline technology. Optimizing a tractor frame for improved cabin NVH To address an aging agricultural workforce and modern ergonomic guidelines, researchers at Doshisha University and Kubota modeled medium- and large-sized agricultural tractors to reduce vibration and noise and increase comfort. Applying 3d-CAD to turbocharger development Ishkawajima-Harima Heavy Industries has developed a 3d-CAD system for turbochargers. satisfying requirements for digital mockup development.

Mining for silence According to an engineer from Cooper-Standard Automotive, active noise control is finally making the transition from marketing hype to viable product. Making a mining engine Customer demands for higher-speed diesel power provided the motivation behind the design of MTU's new 20-cylinder engine. Reader's Choice: Top technologies of the Year Readers have selected the ten most interesting stories in SAE Off-Highway Engineering during the past year. Results are based on the reader-response choices following feature articles and shorter technology items. The supply chain gang No longer in its infancy, e-business proves its worth by streamlining operations along the supply chain.

Lightpipe design According to Breault Research Organization, any off-highway instrument or control that needs illumination is a candidate for a lightpipe to take light from where it is generated to where it is needed. The biodiesel choice Experts from the Natural Biodiesel Board believe it is time to consider alternatives to the current fuel structure. One solution to rising fuel prices is the pursuit of biodiesel fuels. Understanding machining difficulties in gray iron Bosch Braking Systems' engineers look more closely than usual at iron brake rotor samples to give new insights into critical characteristics of the material. Caterpillar mining for customers With commodity prices low, Caterpillar wants to make mining as productive an enterprise as possible for customers.

Cadillac CTS GM's all-new global sports sedan makes no excuses in chassis dynamics, body integrity, powertrain performance, premium materials, and overall craftsmanship. Taking control of hybrids Software must monitor and manage many parameters while coordinating the complex operations of the engine, electric motors, and batteries. LIghter, faster, lower cost Ducati's top engineer brought a "maniacal" approach to developing the 1098 superbike. Diesels' brave new year Lean-NOx catalysts, closed-loop cylinder pressure sensing, and homogenous combustion are making "50-states" diesels a reailty. Behind the curtain AEI takes an in-depth look at how the designers and engineers at General Motors took the company's trio of new crossover SUVs from sketchbook to road. Engineering from everywhere With future growth in car and truck sales coming mainly from emerging markets, companies are realigning their engineering operations accordingly.

Safe and sensitive Sensor fusion is the latest data sharing scheme for improving the performance of safety systems. BMW counts down to 1 Series The company's latest entry in the premium compact segment comes to market with rear-wheel drive, 50:50 weight distribution, and longitudinally mounted engines headlined by a powerful turbodiesel. Chevrolet re-engineers Corvette Although the new C6 is shorter and narrower than its predecessor, engineers wanted "more power, more passion, more precision" for the two-seat sportscar. 2005 Honda Odyssey The completely re-engineered model features new technologies from the inside out related to safety, performance, and entertainment. Chrsyler 300 / Dodge Magnum The "it" vehicles for the 2005 model year feature advanced technologies such as cylinder deactivation to go along with Hemi power and distinctive styling. Ford makes space for family vehicles Volvo donates its P2 platform for the new Ford Five Hundred, Freestyle, and Mercury Montego.

Looking forward to safer highways New camera technologies, along with better algorithms and software, are enabling the move to active-safety systems that warn and then take control of vehicles in dangerous situations. Fuel-cell futures Eager to find alternative-propulsion solutions, automakers are betting that renewed emphasis on fuel-cell vehicles will pay off in the long run, with the latest examples aiming to prove higher-volume production feasibility. Consensus building ojn refrigerant type The hydrofluoro-olefin refrigerant HFO-1234yf has emerged as Europe's favored R-134a replacement, but some prefer R-744. Strengthening the link through software The next generation of simulation tools could help better synchronize manufacturing engineering and product design.

Systems drive safety Engineers are using a holistic approach to design safer vehicles by adding function and integrating multiple subsystems. The gas in greener Biodiesels promise to help reduce petroleum consumption and CO2 emissions, but much of the potential depends on production and infrastructure investment. Good vibrations Instead of excising all noise, vibration, and harshness, engineers are focusing more on making specific sounds and feedback "fit" a vehicle. SAE Commercial Vehicle Congress Preview International Truck and Engine executives head the charge for "positive industry change" at SAE's third Congress for the on- and off-highway communities.

Ultracapacitors charge ahead The limitations of current energy-storage solutions could encourage consideration of these alternative solutions, but more engineering work needs to be done to reduce costs. Technology for all Automotive industry executives expect high-end technologies, once considered only for inclusion in luxury cars, to increasingly make their way into entry- and mid-level vehicles in the very near future. Convergence continues A lot of automotive electronics ground has been covered at the Convergence conferences past, and there's more to come at this year's show in October. Fueling the next generation As hydrogen joins the battle for automotive power with gasoline and diesel, the future could be more choices rather than one winner.

Toyota Prius: Best-Engineered Car of 2001 Following the Japanese introduction of the first-generation Pruis in 1997, the significantly re-engineered second-generation model features new technology to meet the demands of the Western market, including improved driving performance, lower emissions, and reduced costs. Introducing Niel Schilke, SAE President for 2001 General Motors' former top engineer in Canada brings a systems engineering mentality, along with high expectations, to the SAE presidency. Fuel cells start to look real It is looking more and more as if the fuel-cell-powered car--the long-awaited "clean personal transportation of the future"--is moving from laboratory vision to technical reality, if not yet market actuality. Fuel-cell testing Capabilities that deliver reliable monitoring and control, as well as offer the benefit of a flexible configuration, are critical to keep pace with evolving fuel-cell technology, according to National Instruments.

R1T Exposed! A comprehensive teardown of Rivian's pioneering electric pickup reveals praiseworthy build quality, innovative thinking…and some lapses in manufacturability. EVs drive NVH materials innovation Skateboard platforms, high-frequency motor noise push lower dB thresholds and new countermeasure solutions. Optimizing design for additive manufacturing Avoiding the pitfalls of 3D printing requires knowing the process limitations - and how to work around them. An expert at a leading AM specialist shares insights on getting it right. Real-time processors help drive the zonal E/E revolution With its new generation of software-compatible processors, NXP aims to accelerate systems consolidation and performance.

Europe's double-decker giant "Aerospace Engineering" provides an overview of the issues and technocal challenges faced by Airbus in the development of the A380. Quiet please Several technologies are under development at GE Aircraft Engines that address strigent demands from the airlines for reduced noise emissions from new aircraft engines. Thermal material solutions Astrium has begun investigating several new metallic thermal protection system concepts for reusable launch vehicles. Bringing the best of both worlds in engine technology GE Aircraft Engines and Pratt & Whitney together developed the GP7000, a powerplant alternative for the Airbus A380 superjumbo aircraft.

Designing reliable boards The makers of electronic hardware are boosting reliability by reducing the number of components that can fail while improving ruggedization for those circuit boards. Better seen, not heard Reducing noise profiles is a multi-targeted task for engine OEMs, airframers, airport authorities, and regulatory agencies. Farnborough 2006 "Sustainable Aviation" will be a key subject as representatives of the global aerospace industry meet at the Farnborough International Airshow.

Engine boosting goes full bore Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Building a pathway for autonomous driving Existing safety systems will be augmented by onboard and external inputs; the biggest challenges will be designing the software that makes proper decisions without error and liability concerns. Steel in control Hyundai Steel develops a new 780-MPa grade of hot-rolled high-strength steel for application in a one-piece front lower control arm, displaying the potential for an 8% mass reduction.

Suppliers put meat on bones of NAIAS show cars Inside and underneath the shiny new models at January's North American International Auto Show is the work of a fiercely competitive supply base. 2006 Engine Special Report Our annual review of the most significant internal-combustion engines of the year ranges from a novel forced-induction four cylinder designed for displacement downsizing to a V10 powerhouse focusing on high output, with three V6s in between. Many products, no wires The Bluetooth wireless protocol is helping consumers to bring their personal electronics along for the ride. Blue skies at Makuhari The forward-looking concept cars at the Tokyo Motor Show point to a brighter, more fuel-efficient future.

The fantastic five Engineers at NASA Langley, NASA Glenn, and the Boeing Co. investigate new aircraft concepts designed to improve fuel economy. Addressing noise, emissions, and fuel efficiency In an interview with "Aerospace Engineering," Rolls-Royce Engineering Director Mike Howse explains the technical challenges and tradeoffs in jet-engine design and development. Doing business via the Internet It's not so much a matter of whether a company should use the Internet to conduct business, but how. This article looks at how two companies- one an aerospace parts maker, the other a provider of e-sourcing solutions- exploit the Internet. Improving processes through new solutions Several aerospace companies have implemented new engineering software products into their work processes to improve efficiency and productivity.

Clean, quiet commercial propulsion Engine manufacturers design future engines to meet noise, pollution, and fuel economy needs. Robots take over Dramatic changes in areas as diverse as semiconductor costs, software tools, and the trend toward regional aircraft are creating opportunities for airplane manufacturers to automate their factories. Rapid prototyping to rapid manufacturing Durable, temperature-resistant powders and materials enable the manufacture of complex components. The research race Aerospace R&D funding in the U.S. is on the upswing, but new priorities create challenges for universities.

Then there were two Prevailing sentiment in the Japanese media, and to some extent among the public, is that there are two truly indigenous automobile manufacturers in Japan: the Toyota group of companies and Honda. Others have entrenched themselves in global alliances for much-needed infusions of foreign capital. Cars and light trucks merge As light-vehicle segments blur in function and utlility, Japanese manufacturers are placing body design emphasis on optimum space utilization and crash safety. Chassis trends Technologies in development by Japanese companies include lane keeping, steer by wire, and dynamic stability via hybrid-electric drive. Engines and electric motors The Japanese industry is pursuing a high-tech mix of internal combustion engines, hybrid IC/electric powertrains, and fuel cells.