Search Results

A simple spring-mass model of the impact response of the side impact dummy (SID) is established. The spring and mass constants of the model are established through system identification methodology based on data from impact tests. The tests are performed in laboratory with hydraulically driven impactors impacting the chest and pelvis of the SID. The input data to the model consist of measured contact force or impactor velocity time histories, and the output data are accelerations on the rib, spine, and pelvis of the SID. The established model appears to predict the test results with reasonable accuracy. The main purpose of this study, however, is to use this simple model to carry out parametric studies of the response of the dummy with changing impact parameters, the result of which would be useful in understanding vehicle crash tests using the SID.

Due to commercial television almost everyone is familiar ‘automotive inflatable restraint system,’ commonly referred to as airbag. Traditionally these bags were made of polyamide fabrics coated with polychloroprene, which made them essentially impermeable. Even though this restraint technology has been in use for more than fifteen years, there remain some features that still need to be improved; i.e., the high cost, the high package volume, the weight and the need for replacement of coated fabrics. In this paper special attention is given to uncoated fabrics. A novel blister-inflation technique was utilized to evaluate the permeability of test fabrics under biaxial stretching conditions. Further, the effect of inflation temperature and internal pressure drop across the fabric on the permeability of the fabrics can be evaluated by this technique.

A nonlinear, shift-variant causal procedure that filters or smooths different segments of a signal dissimilarly was developed using polynomials. This procedure can be used on automotive crash/impact signals to improve the quality of the signal by reducing the noise and preserving the peak while minimizing noncausal effects.

This paper presents an energy relationship between vehicle impact pulses and restraint systems and applies the relationship to formulations of response factors for linear and nonlinear restraints. It also applies the relationship to derive optimal impact pulses that minimize occupant response for linear and nonlinear restraints. The relationship offers a new viewpoint to impact pulse optimization and simplifies the process mathematically. In addition, the effects of different vehicle impact pulses on the occupant responses with nonlinear restraints are studied. Finally, concepts of equivalent pulses and equal intensity pulses are presented for nonlinear restraints.

Statistical methods, using the entire time-history, can be used to assess the impact response of an ATD (Anthropomorphic Test Device) in terms of its repeatability and reproducibility. In general, the methods generate a correlation relationship described as shape, magnitude and phase-difference between two time-histories’ in a given set of similar tests: for repeatability the relationship it is for the same ATD, for reproducibility it is for different ATDs of the same design and for biofidelity it is a relationship between ATDs and biomechanical response data from a series of human surrogate impact tests. The method uses the phase relationship to minimize the difference between any two time-histories through an alignment procedure and the magnitude and shape correlations are used to generate a parametric evaluation of the differences between any two time-histories, or set of time-histories.

A parametric model obtained by fitting a set of data to a function generally uses a procedure such as maximum likelihood or least squares. In general this will generate the best estimate for the distribution of the data overall but will not necessarily generate a reasonable estimation for the tail of the distribution unless the function fitted resembles the underlying distribution function. A distribution function can represent an estimate that is significantly different from the actual tail data, while the bulk of the data is reasonably represented by the central part of the fitted distribution. Extreme value theory can be used to improve the predictive capabilities of the fitted function in the tail region. In this study the peak-over-threshold approach from the extreme value theory was utilized to show that it is possible to obtain a better fit of the tail of a distribution than the procedures that use the entire distribution only.

A comparison of the NHTSA advanced dummy and the Hybrid III is presented in this paper based on their performance in twenty four frontal impact sled tests. Various time histories pertaining to accelerations, angular velocities, deflections and forces have been compared between the two dummies in light of their design differences. This has lead to some understanding about the differences and similarities between the NHTSA advanced dummy and the Hybrid III. In general, the chest as well as the head motion in the NHTSA advanced dummy are greater. The lumbar moments in the NHTSA advanced dummy are lower than that in the Hybrid III. The upper and lower spine segments in the NHTSA advanced dummy, generally rotate more than the spine of the Hybrid III.

The effects of stress in brain material was investigated with experimental and computational idealizations of the head. A water-filled cylinder impacted by a free traveling mass serves to give insight into what could happen to the brain during impact. Under an impact of sufficient velocity, cavitation can occur on the cylinder boundary opposite impact. Limited internal vaporization of the fluid may also occur during severe impact events. Cavitation occurred in these experiments at accelerations greater than 150 g's. Head forms of different sizing will experience an acceleration magnitude inversely proportional to the size difference to produce a similar pressure/cavitation response.

A comparison of the NHTSA advanced dummy, THOR, and the Hybrid III dummy is presented in this paper, based on their performance in four vehicle barrier tests, six HYGE sled tests and twenty two pendulum chest–impact tests. Various time–histories pertaining to accelerations, angular motions, deflections, forces and moments are compared between the two dummies in light of their design difference. In general, in the vehicle crash tests, the resultant head acceleration and chest deflection in THOR are greater than those in the HYBRID III. The shear, axial force and lateral moment in THOR's lumbar are less than those in the Hybrid III in frontal impacts. The differences in the head/chest acceleration and chest deflection could be due to the differences in the construction of the neck and the thorax of the THOR when compared to those of the Hybrid III. The THOR and the Hybrid III have the same level of repeatability in the rear impact sled tests.

Safety restraint technology relies on woven fabrics as the principle material of construction. On impact, gases are generated instantaneously to inflate the bag. As the pressure within the bag increases during deployment and later from passenger contact, the airbag fabric stretches in a biaxial-manner. Passenger contact with the slowly deflating airbag accelerates the gaseous outflow through the fabric, airbag seams, and through specially constructed vents. A fraction of the impact energy can also be adsorbed by mechanical biaxial stretching of the fabric's fibers. However, the fabric's permeability and/ or vent system appear to be of primary importance to energy dissipation. A unique blister-inflation technique was developed and used to evaluate the fabric properties necessary for energy dissipation by these four mechanisms. The performance of fabrics woven from two traditional commercial polymeric fibers offered for airbag construction were considered.

The paper presents a comparison between the acceleration pulses of vehicle-to-vehicle crash tests with those of different single-vehicle crash tests. The severity of the full frontal rigid barrier test is compared with that of the vehicle- to-vehicle crash test based on average acceleration and time-to-zero-velocity. Based on this a 30mph full frontal rigid barrier test is found equivalent to a 41mph vehicle-to-vehicle crash. A reduced speed of 22mph for full frontal rigid barrier test is found to represent vehicle-to- vehicle crashes with 50%-100% overlap, with each vehicle travelling at 30mph. The paper also presents a comparison of the acceleration pulses from different crash tests based on the pulse shape and the pulse phase cross-correlation. None of the single-vehicle crash tests have been found to resemble vehicle-to-vehicle crashes in terms of the pulse shape and the pulse phase.

Developing an effective side impact ATD for assessing vehicle impact responses requires a method for evaluating that ATD's bio-fidelity. ISO/TR9790 has been in existence for some years to serve that purpose. Recently, NHTSA sponsored a research project on the post-mortem human subjects (PMHS) responses subjected to side impact conditions. Based on those newly available PMHS data, Maltese generated a new approach for creating bio-fidelity corridors for human surrogates. The approach incorporates the time factor into the evaluation equation and automates the process (Maltese et al. 2002). This paper serves as the first attempt to look closely at the new bio-fidelity corridor generation process (hereafter referred as the Maltese approach) with respect to its validity, effectiveness, as well as its practicality. The effect of mass scaling was first examined in order to ensure the integrity of the data. The time alignment scheme and the formation of the corridors were then tested.

This paper reports a 2010 study undertaken to determine generic acceleration pulses for testing and evaluating advanced batteries for application in electric passenger vehicles. These were based on characterizing vehicle acceleration time histories from standard laboratory vehicle crash tests. Crash tested passenger vehicles in the United States vehicle fleet of the model years 2005-2009 were used. The crash test data were gathered from the following test modes and sources: 1 Frontal rigid flat barrier test at 35 mph (NHTSA NCAP) 2 Frontal 40% offset deformable barrier test at 40 mph (IIHS) 3 Side moving deformable barrier test at 38 mph (NHTSA side NCAP) 4 Side oblique pole test at 20 mph (US FMVSS 214/NHTSA side NCAP) 5 Rear 70% offset moving deformable barrier impact at 50 mph (US FMVSS 301). The accelerometers used were from locations in the vehicle where deformation is minor or non-existent, so that the acceleration represents the “rigid-body” motion of the vehicle.

The response of the head to blunt impact was investigated using anesthetized live and repressurized- and unrepressurized-postmortem Rhesus. The stationary test subject was struck on the occipital by a 10 kg guided moving impactor. The impactor striking surface was fitted with padding to vary the contact force-time characteristics. A nine-accelerometer system, rigidly affixed to the skull, measured head motion. Transducers placed at specific points below the skull recorded epidural pressure. The repressurization of postmortem subjects included repressurization of both the vascular and cerebrospinal systems.

The response of the spine acceleration to rib and pelvis acceleration input of the side impact dummy (SID) is modeled using system identification methods. The basis for the modeling is a simplified representation of the SID by a 3-mass, 2-spring system. Based on this spring-mass representation, two types of response models are established. The first is a "gray-box" type with rib/pelvis-spine relationship modeled by Auto Regression with eXogeneous (or eXtra) input (ARX) type system models. The structure of these models is partially based on the spring-mass simplified representation, hence the notion "gray- box." The parameters of these models are identified through linear regression from test data. The second type of models is noted "physical model" here, since it is strictly a state- space form of the equation of motion of the simple spring-mass representation.

This technical paper presents the results of biomechanical testing conducted on the ES-2 dummy by the Occupant Safety Research Partnership and Transport Canada. The ES-2 is a production dummy, based on the EuroSID-1 dummy, that was modified to further improve testing capabilities as recommended by users of the EuroSID-1 dummy. Biomechanical response data were obtained by completing a series of drop, pendulum, and sled tests that are outlined in the International Organization of Standardization Technical Report 9790 that describes biofidelity requirements for the midsize adult male side impact dummy. A few of the biofidelity tests were conducted on both sides of the dummy to evaluate the symmetry of its responses. Full vehicle crash tests were conducted to verify if the changes in the EuroSID-1, resulting in the ES-2 design, did improve the dummy's testing capability. In addition to the biofidelity testing, the ES-2 dummy repeatability, reproducibility and durability are discussed.

For the purposes of analyzing and understanding the general effects of a set of different vehicle attributes on overall crash outcome a fleet model is used. It represents the impact response, in a one-dimensional sense, of two vehicle frontal crashes, across the frontal crash velocity spectrum. The parameters studied are vehicle mass, stiffness, intrusion, pulse shape and seatbelt usage. The vehicle impact response parameters are obtained from the NCAP tests. The fatality risk characterization, as a function of the seatbelt use and vehicle velocity, is obtained from the NASS database. The fatality risk is further mapped into average acceleration to allow for evaluation of the different vehicle impact response parameters. The results indicate that the effects of all the parameters are interconnected and none of them is independent. For example, the effect of vehicle mass on fatality risk depends on seatbelt use, vehicle stiffness, available crush, intrusion and pulse shape.

This paper outlines a method for estimating the probablistic nature of airbag crash sensor response and its effect on occupant position. Probability surfaces of airbag fire times are constructed for the impact velocities from 0 to 40 mph. These probability surfaces are obtained by using both frontal offset deformable barrier and frontal rigid barrier crash data. Another probability surface of displacement is constructed to estimate the occupant displacement time history before airbag deployment. This probability surface is constructed by using the initial occupant seating position data and the vehicle impact velocity and deceleration data. In addition, the probability of airbag firing at a given crash velocity is estimated from NASS-CDS, frontal offset and rigid barrier crash data.

This technical paper presents the results from tests conducted with the ES-2re, a version of the ES-2 side impact dummy that was modified by the National Highway Traffic Safety Administration (NHTSA) to improve its performance in crash tests. Through the series of biofidelity tests conducted on the ES-2re, described in International Standards Organization (ISO) Technical Report (TR)9790 (1999), the OSRP observed a final overall biofidelity ranking of 4.1 for the ES-2re, which corresponds to an ISO classification of “marginal.” The biofidelity of the ES-2re is compared to that of the ES-2 and the WorldSID. Repeatability was also evaluated on the ES-2re based on the biofidelity test data. Additional pendulum tests were performed to assess the response of the dummy in oblique loading conditions, and results indicate that oblique loading from the front leads to significantly reduced rib deflections.

Ten sled tests were conducted with a Hybrid III 10-year-old dummy under a 3-point belt only restraint condition to evaluate its performance. The results of the Hybrid III 10-year-old in these tests indicate that there are artifactural noise spikes observable in the transducer responses. A number of metal-to-metal contacts in the shoulder area were identified as one of the sources for the chest acceleration spikes. Noise spikes were also observed in the response from multiple body regions; however, the source of the spikes could not be determined. Compared to the other Hybrid III dummies, non-characteristic dummy chest deflection responses were also observed. This limited analysis indicates that the Hybrid III 10-year-old dummy requires additional development work to eliminate the metal-to-metal contacts in the shoulder area and to understand and correct the other sources of the noise spikes. More investigation is needed to determine if the chest deflection response is appropriate.