Search Results

Fast-track propulsion testing Whether it is compressor refinement or complete test programs for next-generation aircraft, the level of propulsion system development in Europe seems to be ever-increasing.

GM's CTO driving new paths to technology leadership 'We're making actual production commitments regarding our advanced-technology strategy, rather than just talking about it,' says GM's CTO Jon Lauckner. 'We're absolutely going to be among the leaders, if not the leader, in these areas.' Aluminum prepares for its next big leap Ford's F-Series blockbuster was just the beginning. New micromills now in pilot phase aim to bring vastly stronger and more formable light-alloy materials at higher capacity, says Alcoa's Mike Murphy. Slick solutions for friction reduction From new lubricants to 'smart' oil pumps and clever bearing technologies, engine designers are attacking every potential source of spin losses and internal friction in the quest for more mechanical work out of less fuel. Next-gen NSX: a twin-turbo, multi-material Ferrari-fighter The production NSX made its much-awaited global debut at NAIAS in January.

Global Viewpoints The latest strategies are investigated for vehicle development by automakers and major suppliers. Sports cars embrace array of green technology IMSA Tudor United SportsCar Championship promotes a variety of green technologies to link racing to the road. More gears, more challenges Many strategies, as well as key software and hardware aspects related to controllers, networks, sensors, and actuators, must be considered to keep automatic transmissions shifting smoothly as more gears are added to improve fuel economy. Advancing structural composites Industry experts address the opportunities and challenges involved with moving toward composite-intensive vehicles, including Nissan's effort to produce a high-volume, fully recyclable composite liftgate with low metal content.

Innovations for lightweighting Tough fuel-economy bogies for 2021 and beyond are driving new approaches to materials use, as seen in these case studies. Axellent progress AAM's new Quantum drive-axle technology is a leap forward in lightweight, efficient driveline systems aimed at 2020 and beyond. Low-temperature combustion ready for prime time? At SAE's High-Efficiency IC Engines Symposium, Delphi said its new, third-generation GDCI is promising, but even LTC proponents admit that challenges remain. More automation for ECU testing The latest fault-insertion tests enable engineers to run more test cases in less time.

Electrifying the two-wheeler Alta Motors, one of the newest electric motorcycle OEMs, is fueling zero-emission excitement with a passion for product. AV testing is for dummies Rapid development of automated vehicles is driving ATD innovations, as Humanetics' CEO explains. 2019 Yamaha Niken steers a radical path The world's first leaning three-wheel motorcycle is an expression not only of engineering prowess, but of a real passion for riding. Editorial Electrify the U.S. Postal Fleet!

Volkswagen reveals its 'people's' EV VW's ID.4 leads the 2021 stampede to electrification for the mass market. Answering the fuel-cell compressor question The optimum compressor device for a fuel cell depends on vehicle application - and a lot more. An Eaton expert explains. Tire pressure's impact on EV driving range A new study shows that tighter control of tire-pressure loss can lead to marked improvement in electric-vehicle efficiency. Editorial Warm socks for the EV options list Supplier Eye For suppliers, a new drumbeat New SAE wireless charging standard is EV game-changer Tula DMD aims for more-efficient e-machines Multiphysics helps transform modeling, simulation Is the camshaft being timed out? New Magna seat puts connectivity in the second row BMW reveals its first "M" performance-badged two-wheeler Volkswagen readies new-generation Golf R Q&A Discussing safety tech, standards and industry trends with Hyundai North America's Brian Latouf

High on hydrogen Through its Symbio joint venture with Michelin, Faurecia expands far beyond its interior-systems base into the fuel-cell future. Simulating a faster route to ADAS and AV validation With its new cloud-based Simphera platform, dSpace responds to demand from global automated-vehicle development teams to help manage their expanding, complex workload. Innovating the methanol fuel cell Using methanol as the source fuel provides an alternative to a gaseous-hydrogen distribution and storage infrastructure, among other potential benefits. Engineering the 2022 Toyota Tundra Chief Engineer Mike Sweers talks structure, materials and a different approach to hybrid power.

New vision @ Gentex Creating a vital ADAS partner through home-grown R&D and manufacturing in (of all places) western Michigan. Positioning for hybrid growth BorgWarner "modularizes" to provide OEMs optimal electrified-driveline flexibility. Editorial: Beleaguered diesel could use a break-or a breakthrough SAE Standards News Kickoff to begin testing program to validate SAE J2954 wireless charging Recommended Practice Supplier Eye Will you be an active participant or passive bystander? The Navigator For future vehicles, communication equals trust Tenneco readies new semi-active digital suspension for 2020 New 90-degree turbo V6 leads Audi's hybridization blitz GKN using modular control algorithms for added systems integration U of M students engineer new autonomous shuttle system Jaguar's 2018 E-Pace shares Land Rover bones Ford pumps powertrains for 2018 F-150 2018 Subaru Crosstrek moves to new global platform Nissan's Ponz Pandikithura on EV lifecycle value

Editorial High noon for high-level autonomy The Navigator A fork in the road for the AV business The Electric, Autonomous Revolution Lifts Off Engineering the new generation of electric and hybrid vertical-take-off-and-landing vehicles at Wisk and Elroy Air. New SAE Standard for Automated-Driving Developers Developed in less than a year, SAE's new J3216 standard will impact traffic management, operations and safety for automated mobility. Making Data Logging, Replay and Prototyping More Efficient High levels of continuity and compatibility are vital to avoid interruptions in the development process - and reduce cost. Radar Death Star ELunewave's 3D-printed spherical antenna makes for fast, 360-degree single-snapshot readings that are claimed to beat the slower sweeps of conventional radar. The Case for FOTA in AV Data Security Firmware over-the-air data transmission helps OEMs drive secure vehicle autonomy.

Editorial Follow the money The Navigator C-V2X is finally gaining momentum in the U.S. Making the Strategic Move Into AV Testing Having built its global engineering reputation in the combustion-engine era, FEV makes a critical leap into automated-vehicle testing. Sony Jumps Into AV Sensors, Software The consumer-electronics giant leverages its innovative technologies for ADAS prototypes and partners with Hungary-based AImotive for automated-driving software. Mitigating Radar-to-Radar Interference An effective radar interference mitigation strategy should have the right balance between complexity and capability for dealing with the interferers. Amending the Automated-driving 'Constitution' SAE International's J3016 standard has been comprehensively revised with new distinctions and definitions. The Committee chairperson, Barbara Wendling, addresses the fine points behind the industry-defining - and perpetually controversial - classification for automated-driving capability.

Editorial SPAC attack The Navigator Mapping the way to safe and natural automated driving Motorcycles Enter the ADAS Age The latest models from BMW, Ducati and KTM feature Bosch's new ACC setup, but further advancements will require navigating critical rider-control strategies. On the Way to SVA Aptiv says its Smart Vehicle Architecture central controller is the key to simpler, more compact and higher-performance ADAS and AV systems. New Insistence for Driver Assistance Panelists at SAE International's 2021 Government/Industry Meeting say assisted-driving technology is worthwhile - but effective driver monitoring is crucial. Flash! Lidar's Next Generation Arrives Technology solutions from new players and alliances are poised to drive down cost. Horiba MIRA's Vision for World-Class AV Testing A new autonomous vehicle development center called Assured CAV boasts a lengthy list of assets and capabilities.

Editorial AV lidar enters a new reality The Navigator UNECE takes first step toward AV regulation Special Delivery - by 'Bot Michigan start-up Refraction AI aims to be the go-to for last-mile, semi-autonomous, all-weather delivery robots. Lidar Infiltrates ADAS Once considered a necessity only in fully autonomous vehicles, lidar sensors are now being evaluated for lower-level driver-assistance systems. Training Data-hungry AI Algorithms Large-scale data refinement is key to bringing more sophisticated automated-driving functions to series production. Simulation's Next Generation Do autonomous-vehicle developers have their simulation strategies all wrong? Some experts think so - but suggest there's a practical solution. Marelli's COVID-killing HVAC Insert With big implications for shared mobility, a new photocatalytic cabin-air purifier claims to kill viruses - including COVID-19. Is Ground-penetrating Radar Next for AV Sensing?

Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.

Roadmap for future Indian passenger drone sector Internet of Vehicles: connected vehicles & data - driven solutions Development and verification of electronic braking system ECU software for commercial vehicle Engineering the Motivo Way Broad capabilities, unparalleled project diversity and an innovative culture have put this thriving California "idea factory" in high demand. Developing an alternative engine concept Ricardo's CryoPower engine leverages two unique combustion techniques for reduced emissions and fuel consumption-liquid nitrogen and split combustion. Long-haul trucking and stationary power generation will be the first beneficiaries of the technologies. Spark of genius Mazda's Skyactiv-X-the nexus of gasoline and diesel tech-remains on track for 2019 production. We test-drive recent prototypes to check development status. Plain bearings for aerospace applications

The drive to success Gopher Motorsports at the University of Minnesota places special emphasis on reliability, with positive results ensuing. Technology designed to win École de technologie supérieure (ÉTS) student engineers developed an electronic continuously variable transmission that was the first of its kind used in Baja SAE competition. Big Data a focus for 2018 SAE President Mircea Gradu Velodyne CQO sees use of Big Data as a way to capitalize on multiple industry trends including vehicle electrification and automated vehicles.

The comeback car The Cal Poly Pomona FSAE Team implements several measures to help overcome setbacks and achieve a podium finish at Formula SAE Lincoln. Going deep The uBox concept car developed as part of Clemson's Deep Orange program features a uniquely formed roof part. Creating a monster North Dakota State University SAE Clean Snowmobile Challenge team brings to life a war-torn engine pieced together with parts from another.

Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.

Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.

Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.

Headliners from Las Vegas Big reveals abounded at the triennial CONEXPO trade show. Following are some of the most notable unveilings from the desert. Cat doubles down on diesel with new C13D platform Deere pursues electric construction machines and charging infrastructure JCB debuts clean-sheet hydrogen combustion engine Volvo CE unveils electric asphalt compactor, announces NA arrival of L350H loader Honda reveals next-gen Autonomous Work Vehicle Deere 3D-prints fuel valves for tractors HP's binder jetting technology and GKN's manufacturing expertise helped John Deere realize its first 3D-printed metal part for mass production. Returning to the SAE presidency for 2023 Setting a "prudently aggressive" mindset in advancing SAE's goals in the mobility ecosystem.