Search Results

Training / Education

Fundamentals of GD&T ASME Y14.5M 1994 - Foundational Level

The 2-day foundational-level Fundamentals of GD&T course teaches the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing as prescribed in the ASME Y14.5M-1994 Standard. The class offers an explanation of geometric symbols, including each symbol’s requirements, tolerance zones, and limitations. It compares GD&T to coordinate tolerancing, Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 100 practice problems using industrial drawings.

Training / Education

Advanced Concepts of GD&T ASME Y14.5M 1994 - Foundational Level

This 2-day foundational-level course teaches advanced geometric dimensioning and tolerancing topics as prescribed in the ASME Y14.5M-1994 Standard. 

Training / Education

Introduction to ISO 90012015 and IATF 169492016

The concept of a Quality System’s approach to business has been employed successfully and sometimes not so successfully for several decades. The International Organization for Standardization (ISO) has been supplying standards that list the key elements/clauses and requirements for building and implementing Quality Systems for over 30 years. These standards are based on the relatively simple concepts of Total Quality Management (TQM), essential principals of management, and a “Process” approach. These standards have been revised several times over the years to make them more realistic and user friendly.

Training / Education

The Principles and Applications of Powertrain Controls for the New Energy Vehicles

课程概述 Powertrain controls for NEVs are one of the most complex and highly confidential areas of NEV research and development.  This two-day course takes the seemingly complicated field of NEV powertrain controls and summarizes it into a few basic principles.  The latest and most popular NEV powertrains are also reviewed to illustrate these principles and the controls strategies used.  对于新能源汽车来说，动力总成控制一直以来都是最复杂的和高度机密的领域之一。在这两天的课程中，我们将把看似复杂的动力总成控制系统总结出几条基本规则，同时，通过对当今其他车型动力控制系统的案例分析，来把这些规则和原理进行融会贯通。

Training / Education

Comparison of ASME Y14.5 1994 to 2009 - Introductory Level

This 1-day introductory-level course offers an explanation of features in the ASME Y14.5-2009 Standard and compares them to the 1994 Standard. The course covers the pertinent changes made to the Y14.5 standard, including how the subject matter has been reorganized and about new sections that have been created for profile, orientation, and form. Each participant receives: An ASME Y14.5 1994-2009 Comparison Workbook,  Class handouts,  A GD&T Ultimate Pocket Guide (2009), and An ASME Y14.5 1994-2009 Comparison Chart Set. Newly acquired learning is reinforced throughout the class with numerous practice exercises.

Training / Education

Effective Writing for Engineering and Technical Professionals

The ability to write concise and unambiguous reports, proposals, manuals, or other technical documents is a key skill for any high-functioning engineer or technical staff person in the mobility industries. Through a combination of class discussions, interactive workshop activities, assignments, checker teams (review teams) and job aids, this course delivers real-life technical writing techniques and tools that can be immediately applied. Participants discover the importance of knowing their audiences and how to communicate technical information in a 'user-friendly' style.

Training / Education

Fundamentals of Powertrain Design for Hybrid Electric Vehicles

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Driven by high fuel prices, environmental regulations, and consumer demand, the market for hybrid electric vehicles (HEV) has experienced rapid growth. Every major automotive company produces an HEV. There are approximately fifty different HEV models on the market and over eight million HEVs already sold. In order to meet current and future demands in the HEV and PHEV markets, success will depend on engineering personnel knowing how to develop and manufacture HEV powertrains.

Training / Education

Control Systems Simplified

This course introduces the highly mathematical field of control systems focusing on what the classical control system tools do and how they can be applied to automotive systems. Dynamic systems, time/frequency responses, and stability margins are presented in an easy to understand format. Utilizing Matlab and Simulink, participants will learn how simple computer models are generated. Other fundamental techniques in control design such as PID and lead-lag compensators will be presented as well as the basics of embedded control systems.

Training / Education

Advanced Product Quality Planning

This course is verified by Probitas as meeting the AS9104/3A requirements for Continuing Professional Development. Advanced product quality planning (APQP) is essential to improving the way companies develop products and services.  It is a standardized, universally accepted fundamental business strategy. This strategy is applicable to all types of organizations including manufacturing and service companies, schools, hospitals, and governmental agencies. The aim of APQP is to enable the organization to produce products and provide services focused on satisfying customer’s needs, wants, and expectations.  

Training / Education

Critical Concepts of Tolerance Stacks ASME Y14.5 1994, 2009, 2018 - Advanced Level

Using tolerance stacks ensures that parts fit together properly, reducing scrap and rework, thereby increasing value. This 3-day advanced-level course includes everything covered in the 2-day foundational-level course. It explains how to use tolerance stacks to analyze product designs and how to use geometric tolerances in stacks.

Training / Education

Critical Concepts of Tolerance Stacks ASME Y14.5 1994, 2009, 2018 – Foundational Level

Using tolerance stacks ensures that parts fit together properly, reducing scrap and rework, thereby increasing value. This 2-day foundational-level course explains how to use tolerance stacks to analyze product designs and how to use geometric tolerances in stacks.

Training / Education

Navigating Requirements for International Certification of Aviation Products

This course describes the basic elements of the process for achieving a successful aircraft certification globally once certification by the State of Design has been accomplished. The regulatory framework established under ICAO is presented with discussion of how major countries around the world comply with the ICAO Standards and Recommended Practices (SARPs). The uncertainty of how each country performs validation is a challenge. This course identifies common validation practices and key bilateral agreements which facilitate acceptance of aviation products from one country to another.

Training / Education

AS9100D Internal Auditor Training

2024-10-28

Internal audits are a requirement of the AS9100, AS 13100 and RM 13005 and are intended to verify the compliance and effectiveness of an organization's quality management system. The methods and techniques for performing internal audits have significantly changed in the aviation, space and defense industries, and internal auditors must be knowledgeable of these requirements and the expectations as identified in the standard.

Training / Education

Fundamentals of GD&T ASME Y14.5 - 2018 Foundational Level

2024-10-22

The 2-day foundational-level Fundamentals of GD&T course teaches the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing, as prescribed in the ASME Y14.5-2018 Standard. The class offers an explanation of geometric tolerances, including their symbols, tolerance zones, applicable modifiers, common applications, and limitations. It explains Rules #1 and #2, the datum system, form and orientation controls, tolerance of position (RFS and MMC), runout, and profile controls. Newly acquired learning is reinforced throughout the class with more than 130 practice exercises, including more than 60 application problems. 

Training / Education

Fundamentals of GD&T ASME Y14.5 - 2009 Foundational Level

2024-09-24

The 2-day foundational-level Fundamentals of GD&T course teaches the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing, as prescribed in the ASME Y14.5-2009 Standard. The class offers an explanation of geometric tolerances, their symbols, tolerance zones, applicable modifiers, common applications, and limitations. It explains Rules #1 and #2, form and orientation controls, the datum system, tolerance of position (RFS and MMC), runout, and profile controls. Newly acquired learning is reinforced throughout the class with more than 80 practice exercises. 

Training / Education

Vehicle Crash Reconstruction Principles and Technology

2024-09-17

Crash reconstruction is a scientific process that utilizes principles of physics and empirical data to analyze the physical, electronic, video, audio, and testimonial evidence from a crash to determine how and why the crash occurred. This course will introduce this reconstruction process as it gets applied to various crash types - in-line and intersection collisions, pedestrian collisions, motorcycle crashes, rollover crashes, and heavy truck crashes. Methods of evidence documentation will be covered. Analysis methods will also be presented for electronic data from event data recorders and for video.

Training / Education

Introduction to Commercial and Off-Road Vehicle Cooling Airflow Systems

2024-09-12

Vehicle functional requirements, emission regulations, and thermal limits all have a direct impact on the design of a powertrain cooling airflow system. Given the expected increase in emission-related heat rejection, suppliers and vehicle manufacturers must work together as partners in the design, selection, and packaging of cooling system components. The goal of this two-day course is to introduce engineers and managers to the basic principles of cooling airflow systems for commercial and off-road vehicles.

Training / Education

AS9145 Requirements for Advanced Product Quality Planning and Production Part Approval

2024-07-08

This course is verified by Probitas as meeting the AS9104/3A requirements for Continuing Professional Development. Production and continual improvement of safe and reliable products is key in the aviation, space, and defense industries. Customer and regulatory requirements must not only be met, but they are typically expected to exceeded requirements. Due to globalization, the supply chain of this industry has been expanded to countries which were not part of it in the past and has complicated the achievement of requirements compliance and customer satisfaction.

Training / Education

Fundamentals of GD&T ASME Y14.5 2018 - Advanced Level

2024-07-02

This 3-day Fundamentals of GD&T course provides an in-depth study of the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing, as prescribed in the ASME Y14.5-2018 Standard. The course can be conducted in three 8-hour sessions or with flexible scheduling including five mornings or five afternoons. 

Book

Honda R&D Technical Review April 2021

2021-04-01

Honda R&D Technical Review is a periodical containing research papers related to Honda R&D Center activities worldwide that cover automobile, motorcycle, power products, aircraft engine, and other fundamental technologies. Honda Motor offers a book for the April 2021 issue with 104 pages containing 12 papers focusing on the following latest topics: Technology for Prediction of Contactor Noise for Electric-powered Vehicle Batteries Reduction of Internal Resistance in High Capacity Lithium-ion Batteries with 3D Lattice-structured Electrode Predictive Technique for Seat Belt Submarining Injury by Triaxial Iliac Load Cell