Search Results

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

Laser Detecting Systems Enhancing Survivability and Lethality on the Battlefield Designing With Plastics for Military Equipment Engine Air-Brakes Paving the Way to Quieter Aircraft Nett Warrior Enhancing Battlefield Connectivity and Communications XPONENTIAL 2018 - An AUVSI Experience Communications in Space: A Deep Subject First Air-Worthy Metal-Printed RF Filter Ready for Takeoff Validation of Automated Prediction of Blood Product Needs Algorithm Processing Continuous Non-Invasive Vital Signs Streams (ONPOINT4) Using a combination of non-invasive sensors, advanced algorithms, and instruments built for combat medics could reduce hemorrhaging and improve survival rates. Calculation of Weapon Platform Attitude and Cant Using Available Sensor Feedback Successful development of mobile weapon systems must incorporate operation on sloped terrain.

Walking the torque A system that fills in the torque gap of a turbocharged diesel engine, allowing a smaller power unit to punch well above its size, without the dreaded 'lag'-that has to be a winner, surely. So a decade later, why has it yet to come to market? Ian Adcock ponders the reasons Tipping the scales The original Range Rover revolutionised the automotive industry when it was launched. Some 42 years later, the latest version looks very much set to do the same as Ian Adcock reports Can computers take control safely? In the name of improved safety, some favour a future where automation takes charge of a fast-moving vehicle. The more cautious support advanced systems that simply warn drivers of potential problems. Who will win out? Chris Edwards reports

Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.

Putting electrification to work For fleets, going green is a high priority-but making green is an even higher one. A move to 'more electric' engines Researchers detail a motor control design for the fuel system of a more electric aero engine, focusing on the necessary safety and reliability aspects. 2012-13 Hybrid Vehicles Guide A quick reference to the latest production HEVs and their key specifications.

The buzz about electric aircraft Emissions limits force the aviation industry to study hybrid and battery-electric propulsion systems. Car-to-X marks the secure beamforming spot Intelligent networking of cars and infrastructure promises a future of enhanced active safety and traffic efficiency, though as an open and decentralized system, car-to-X is exposed to various attacks against security and driver's privacy. Talking big A look at factors that should be considered by OEMs when implementing a telematics solution in the heavy-duty on- and off-highway mobile equipment markets.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

eAxles gain traction OEMs are developing and testing axles with integrated electric powertrains to electrify trucks of all sizes. Securing CAN networks in commercial vehicles A CAN transceiver with built-in security functions can avoid the complexity of end-to-end security solutions that are especially hard to implement on CVs. Electrification is the future for defense vehicles Despite infrastructure challenges, electrified and automated military vehicles will save fuel and lives, said Allison's VP of Defense Programs at SAE COMVEC 2022. Editorial Hiring talent to meet high-tech demands Allison's now open for hydrogen testing Electrification's impact on commercial-vehicle chassis design Harbinger prepares to enter commercial market with novel eAxle ZF, Freudenberg developing integrated 'Powerpack' fuel cell and e-drive Freightliner's medium-duty makeover for M2 and SD models Toyota's hydrogen fuel-cell powertrain provides an electrifying ride

On the verge of the Digital Age Increasingly connected electrohydraulic systems and machine controls allow the high degree of controllability that's essential for automated operations. Miserly power systems Engineers push engine, transmission technologies to turn off fuel usage. All options on the table Powertrain developers who spoke at SAE COMVEC are leaving no stone unturned in their quest to trim emissions. Cab air quality: A critical component of operator comfort Focus on defining cab air quality, measuring it, and designing the needed performance into cabin designs and HVAC systems is intensifying. Expanding fast charging faster Tritium works to accelerate installation of DC fast-charging infrastructure to keep up with growing demand for commercial EVs.

The next phase Meeting Phase 2 fuel efficiency and GHG emissions for heavy trucks will require multiple technology pathways-some of which are still on the horizon. Active vibration damping for construction machines An innovative concept for an active system to reduce machine oscillations based on frequency identification. Consumer electronics come on board Smartphones and tablets are likely to play a large role in HMIs for heavy vehicles-if productivity and safety are not compromised. Patton's new campaign As new SAE International President for 2017, Doug Patton will advocate STEM, "cultivation" of prospective young engineers. PACCAR's Sproull primed for SAE Commercial Vehicle post As SAE International's new 2017-2020 Commercial Vehicle Sector VP, Landon Sproull intends to bolster the society's involvement in evolving industry regulations and to better cultivate cross-sector alliances.

Battery of issues surrounds large-vehicle electrification Converting heavy-duty vehicles to battery power will require advances in weight reduction and thermal management. Autonomy kicks up some dust Machines that move, haul and plow earth can capitalize on autonomous systems today via increased safety and productivity in the field and significant cost savings. Digitalizing to deliver actionable data Mobile hydraulics expert details key trends in controls and IoT connectivity to improve machine design and end-user operations.

Big future for e-axles, advanced motors Top transmission engineers claim driveline electrification will transform everything from all-wheel drive to Class 8 tractor-trailers. Big data's benefits keep a-comin' Gigabytes of data are being collected and increasingly mined to improve field operations, maintenance and even vehicle design. Transformative times Despite a challenging climate, technology development progresses - as does the sharing of innovative ideas - virtually. Editorial Zeroing in on zero emissions Softing envisions secure, reliable predictive maintenance Reconstructing accidents in the ADAS age Paving the way to improved truck fuel efficiency Nikola looks to accelerate production, hydrogen infrastructure Mecalac designs unique-pivoting swing loader Q&A' Horiba's Joshua Israel discusses complex regulatory landscape's impact on commercial-vehicle development and shift to electrification.

Electric machines find their niche Smaller machines working in cities are particularly ripe for electrification, but most off-highway applications will retain the internal-combustion engine. Big data, big benefits Data mining helps users and equipment developers use data from on-vehicle sensors to work more efficiently. Data connectivity in harsh environments Ensuring high-speed data transmission requires OEM designers to think more about components, placement and the impact of environmental conditions early in design. Trucks with intuition Perceptive Automata partners with Volvo Trucks to demonstrate AI technology that can determine when pedestrians will cross the road. Change is afoot Cummins and its CTO help focus the 2019 SAE COMVEC on the fast-shifting technology landscape that faces both on- and off-highway sectors. Editorial AI, ADAS & AVs-oh my!

Heavy-duty engine design Increasing regulations and market demands call for cleaner, more durable and fuel-efficient engines. Developers rely on CAE simulation, enhanced test methods and 3D printing to keep up. Switching to comfort mode Switches, knobs and touch panels evolve to reduce operator fatigue. Big on prognostics Smart data-analyzing procedures that support predictive maintenance will help to significantly increase the uptime of heavy-duty vehicles. The "Evolution of Big Data" symposium at SAE COMVEC 2018 addresses such critical topics. Starship road trip Optimized aerodynamics and production-ready technologies propel Shell's Class 8 concept to a 248% freight-ton-efficiency improvement.

The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.

HMIs extend beyond the cab Telematics functions are being integrated into multi-function user interfaces. Standards step forward in design of off-highway electronics Functional safety standards are starting to impact many development projects, while the auto industry's AUTOSAR standard is being deployed to help enable software reuse and simplify designs. Leveraging automotive lightweighting techniques to improve off-highway emissions Where systems engineers can gain efficiencies in off-highway equipment is agnostic, they'll take it anywhere, and so they should, but one of the ways, often underestimated, is through the use of strong and lightweight advanced materials. Waste heat recovery for the long haul A WHR system based on an organic Rankine cycle has been developed for a long-haul Iveco Stralis truck.

Rotary SI/CI combustion engines: A thing of the future? The internal combustion engine enjoys widespread use as an inexpensive and reliable power conversion system. While piston engines date back 150 years, various alternative engine architectures and cycles have been considered. Aftertreatment comes with challenging diagnosis Diagnosing engine and aftertreatment systems is forcing design teams to look at new ways to diagnose problems over long vehicle lifetimes. Taking on NVH reduction techniques A look at the enhanced durability benefits obtained by changing the polymer composition, manufacturing methods, and design optimization of a powertrain mount for an off-highway vehicle.

Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs