Search Results

Training / Education

Fundamentals of GD&T for Inspectors - Foundational Level

This 2-day foundational-level course builds on geometric dimensioning and tolerancing fundamentals and teaches an introduction of how to inspect GD&T requirements.  The course offers an explanation of the geometric symbols, rules, and concepts, the datum system, and how to inspect GD&T requirements using tools from the four categories of inspection tools (CMM; comparison instruments and fixed gages; hand tools and open set up; and production gaging systems).

Training / Education

Fundamentals of Functional Gaging and Measurement - Foundational Level

This 2-day foundational-level course teaches functional gaging design. It covers how to verify part dimensional requirements using functional gages and other measurement methods. The course offers an explanation of metrology, the roles of the metrologist and inspector, measurement uncertainty, inspection tools, functional gages, inspection planning and reporting, and simulating datums. Each participant receives: A Functional Gaging and Measurement Workbook and  Drawing handouts. Newly acquired learning is reinforced throughout the class with numerous practice exercises. 

Training / Education

Fundamentals of GD&T ASME Y14.5M 1994 - Foundational Level

The 2-day foundational-level Fundamentals of GD&T course teaches the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing as prescribed in the ASME Y14.5M-1994 Standard. The class offers an explanation of geometric symbols, including each symbol’s requirements, tolerance zones, and limitations. It compares GD&T to coordinate tolerancing, Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 100 practice problems using industrial drawings.

Training / Education

Advanced Concepts of GD&T ASME Y14.5M 1994 - Foundational Level

This 2-day foundational-level course teaches advanced geometric dimensioning and tolerancing topics as prescribed in the ASME Y14.5M-1994 Standard. 

Training / Education

Flight Control Actuation System Considerations on Architecture Design and System Installation

The purpose of this four hour short course is to provide information to understand how is established the basic architecture of a Flight Control Actuation System of a transport airplane, i.e. understanding the rationale for the distribution of the control surfaces, power sources, actuators and computers.

Training / Education

Effective Writing for Engineering and Technical Professionals

The ability to write concise and unambiguous reports, proposals, manuals, or other technical documents is a key skill for any high-functioning engineer or technical staff person in the mobility industries. Through a combination of class discussions, interactive workshop activities, assignments, checker teams (review teams) and job aids, this course delivers real-life technical writing techniques and tools that can be immediately applied. Participants discover the importance of knowing their audiences and how to communicate technical information in a 'user-friendly' style.

Training / Education

Comparison of ASME Y14.5 1994 to 2009 - Introductory Level

This 1-day introductory-level course offers an explanation of features in the ASME Y14.5-2009 Standard and compares them to the 1994 Standard. The course covers the pertinent changes made to the Y14.5 standard, including how the subject matter has been reorganized and about new sections that have been created for profile, orientation, and form. Each participant receives: An ASME Y14.5 1994-2009 Comparison Workbook,  Class handouts,  A GD&T Ultimate Pocket Guide (2009), and An ASME Y14.5 1994-2009 Comparison Chart Set. Newly acquired learning is reinforced throughout the class with numerous practice exercises.

Training / Education

Introduction to ISO 90012015 and IATF 169492016

The concept of a Quality System’s approach to business has been employed successfully and sometimes not so successfully for several decades. The International Organization for Standardization (ISO) has been supplying standards that list the key elements/clauses and requirements for building and implementing Quality Systems for over 30 years. These standards are based on the relatively simple concepts of Total Quality Management (TQM), essential principals of management, and a “Process” approach. These standards have been revised several times over the years to make them more realistic and user friendly.

Training / Education

DFMEA Overview and Application

During this DFMEA Overview and Application course, participants will be introduced to important FMEA concepts, the basic theory behind the concepts, then discuss how these concepts can be applied to the customer's design FMEA activities. Participant activities include: reading assignments, group discussions, exercises, building Block Diagrams as a group, and beginning a DFMEA on a customer’s product.

Training / Education

Navigating Requirements for International Certification of Aviation Products

This course describes the basic elements of the process for achieving a successful aircraft certification globally once certification by the State of Design has been accomplished. The regulatory framework established under ICAO is presented with discussion of how major countries around the world comply with the ICAO Standards and Recommended Practices (SARPs). The uncertainty of how each country performs validation is a challenge. This course identifies common validation practices and key bilateral agreements which facilitate acceptance of aviation products from one country to another.

Training / Education

Quality Function Deployment Transforming Voice of the Customer into Engineering Specifications

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Currently in the industry, especially within China, product requirement development is more of an experience-based process rather than a scientific methodology. This course addresses this issue and provides a more process-driven method for better requirement development through the Quality Function Deployment (QFD) methodology.  Real industrial examples are used to demonstrate how to systematically convert the voice of the customer data to engineering specifications using QFD.

Training / Education

A Primer on Regulations and Liability Considerations for HAV’s

Potential regulations surrounding the development, testing and commercial launch of Highly Automated Vehicles and possible liability exposure for the manufacturing and operation of Highly Automated Vehicles are fluid and changing areas, that will continue to evolve over the next several years. The first half of this course reviews where regulations are at the state and federal levels, what actions are currently under consideration, how current regulations will need to change to accommodate HAV’s, and how and when new regulations might be implemented. The second half covers both common law and strict liability and how it may apply to HAV’s.

Training / Education

Design of Experiments - Basic Simplified Taguchi

Design of Experiments is a statistically based, structured approach to product or process improvement that will quickly yield significant increases in product quality and subsequent decreases in cost.  Products and processes can be designed to function with less variation and with less sensitivity to environmental factors or customer usage. While still maintaining high quality from a customer's viewpoint, products and processes can utilize lower cost materials and methods.  Specifications can be opened-up with wider tolerances while still maintaining high quality for customers.  

Training / Education

EV Motor Design Analysis and Test Verification

This course, designed for EV motor engineers and graduate participants, systematically introduces EV motor design analysis and test verification. Combined with engineering practice, it discusses typical EV motor design cases and practical issues related to EV motor technology, aiming to broaden the horizon of EV motor design engineers and improve their problem-solving skills.

Training / Education

Guidance for Software Tool Qualification (DO-330)

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Software technology for airborne and ground-based operations has changed and software development teams frequently need guidance on tools for the development, verification, transformation, testing, modification and control of software programs. Developed in support of DO-178C or CO-278A, RTCA DO-330 explains the process and objectives for qualifying software tools and facilitates the compliance of airborne products.

Training / Education

Model-Based Engineering Overview for Systems Management Practitioners

Use of Model-Based Systems Engineering (MBSE) has been growing across industry, extending beyond defense and aerospace to include various commercial enterprises such as automotive and healthcare. Tool vendors are quick to point out benefits of this model-based approach and practices but are not always clear how MBSE benefits can be realized on a project. When deployed successfully, several key considerations should be addressed that maximize the value for a use-case. This four-hour class will discuss the nature and purpose of the MBSE approach and how key information is used for successful MBSE deployment as it relates to Systems Management.

Training / Education

DO-178C Basic Training

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). This course is offered in Mandarin Chinese. The course materials are in English and Chinese. RTCA DO-178C is the accepted standard for civil aviation software development and certification, and Chinese civil aviation companies must comply with this standard to meet airworthiness requirements. Participants will attain a basic understanding of the concepts of DO-178C and how it is properly utilized.

Training / Education

Fundamentals and Applications of Electric Motors for Automotive Industries

As the electrification of automobiles is on the rise, it is imperative that the capabilities and limits of the associated devices and systems be understood at a higher level than previously considered adequate. For example, the Tesla Model S has 62 electric motors while the Model X has 70! They propel the vehicle and provide comfort too. Their design must reflect the worst case operating scenarios, duty cycles, environment, country of use and its standards, etc.

Training / Education

Methodology of Interactive Design and Study Using Driving Simulator

This course is offered in China only and presented in Mandarin Chinese. Driving simulator is a key component of automotive interactive design, which can provide objective data to support both the effectiveness of design and user experience. On the other hand, driving simulator and the design of its experiments are major challenges, as improper experiment design will lead to consequences such as failure in identifying designing errors of the interactive design itself.

Training / Education

FAA/EASA Certification, Methods of Compliance for 29.801 Ditching

Certifying an aircraft, part or appliance can be a challenge.  The FAA/EASA procedures can be frustrating and a maze of rules, policy and guidance. Understanding the process and procedures can provide you with a competitive edge and reduce your time obtaining a Certification approval. This course provides an overview of the Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. This course has a focus on 29.801 Ditching and EASA 29.802 Emergency Flotation.