Search Results

Training / Education

Role of DER-AR and Airworthiness Certification Process

This four-hour short course will provide an overview of the airworthiness certification process and the role of the FAA Designated Engineering Representative (DER) and Authorized Representative (AR) with insight into the type design, minor/ major Changes, FAA conformity process, and test witnessing. It also provides familiarity with FAA forms.

Training / Education

Understanding and Supporting Aircraft Accident Investigation and Reconstruction

Aircraft accident and incident investigations should be supported by all engineering disciplines and departments involved with design, manufacturing, certification, and field operations. For individuals called upon to serve as advisors or technical representatives to official aircraft accident investigation (AAI) teams, an understanding of accident and wreckage reconstruction methodologies and processes is critical to success in this supportive role. This two-day course will begin with basic investigative philosophies and procedures.

Training / Education

Fundamentals of Functional Gaging and Measurement - Foundational Level

This 2-day foundational-level course teaches functional gaging design. It covers how to verify part dimensional requirements using functional gages and other measurement methods. The course offers an explanation of metrology, the roles of the metrologist and inspector, measurement uncertainty, inspection tools, functional gages, inspection planning and reporting, and simulating datums. Each participant receives: A Functional Gaging and Measurement Workbook and  Drawing handouts. Newly acquired learning is reinforced throughout the class with numerous practice exercises. 

Training / Education

Fundamentals of GD&T for Inspectors - Foundational Level

This 2-day foundational-level course builds on geometric dimensioning and tolerancing fundamentals and teaches an introduction of how to inspect GD&T requirements.  The course offers an explanation of the geometric symbols, rules, and concepts, the datum system, and how to inspect GD&T requirements using tools from the four categories of inspection tools (CMM; comparison instruments and fixed gages; hand tools and open set up; and production gaging systems).

Training / Education

Filtration and Contamination Control for Aerospace Hydraulic Systems

This four-hour short course provides an introduction to contamination control principles in aircraft hydraulic systems. Topics covered include an introduction to the types of contamination in aircraft hydraulic systems, contaminant measurement, and reporting methods. In addition, the impact of contamination on hydraulic components is discussed in detail. Along with an introduction to filtration mechanisms, information on testing, rating, and specifying filters will be provided.

Training / Education

Advanced Vehicle Dynamics for Passenger Cars and Light Trucks

This course applies advanced theory, physical tests and CAE to the assessment of ride, braking, steering and handling performance, governing state-space equations with transfer functions for primary ride and develop and analyze open loop handling. Building on the analysis of the state space equations, common physical tests and their corresponding CAE solutions for steady state and transient vehicle events.  The "state-of-the-art"  vehicle dynamics CAE, and common lab and vehicle tests with metrics used to assess chassis system and vehicle performance will be discussed.

Training / Education

Accelerated Test Methods for Ground and Aerospace Vehicle Development

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development.  Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater.

Training / Education

Creating and Managing a Product Compliance Program

This two-day course presents a process development methodology that can be used repeatedly as new compliance requirements emerge.  You will learn best practices in creating a compliance program for your products and markets, and how to use this program at all stages of product development and production.  Sample spreadsheets will be used to demonstrate tailoring the program to your product, your markets, and your organization.  A properly managed compliance program simplifies the certification or approval of your product, and ensures that you regularly apply and document good engineering practices for product safety and reliability.

Training / Education

Aviation Safety Engineer Job Functions

This course content provides the Civil Aviation Safety Engineers (Systems - Electrical) with the knowledge and skills to conduct oversight of aviation safety, aircraft certification and Continued Operational Safety. These areas of responsibility include, but are not limited to, Type Certification, Amended Type Certification, Supplemental Type Certification, Parts Manufacturing Approval (PMA), Technical Standard Order (TSO) Continued Operational Safety, Flight manuals, and Operational Approvals.

Training / Education

Model-based Development of Embedded Software in Compliance with ISO 26262 – Challenges and Effective Solutions

This training class describes how to develop and safeguard safety critical embedded software in serial projects with Simulink in compliance with ISO 26262 (part 6). Beginning with a general overview of the ISO standard, we proceed by focusing on the ISO 26262 requirements that are specifically relevant to model based development. We address the impact the standard has had on model-based development with Simulink, as well as the requirements for model and software architecture in safety critical software. We also look at modeling guidelines and testing before wrapping up the class by assessing ISO 26262 readiness of controller functions.

Training / Education

EV Motor Design Analysis and Test Verification

This course, designed for EV motor engineers and graduate participants, systematically introduces EV motor design analysis and test verification. Combined with engineering practice, it discusses typical EV motor design cases and practical issues related to EV motor technology, aiming to broaden the horizon of EV motor design engineers and improve their problem-solving skills.

Training / Education

DO-178C Basic Training

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). This course is offered in Mandarin Chinese. The course materials are in English and Chinese. RTCA DO-178C is the accepted standard for civil aviation software development and certification, and Chinese civil aviation companies must comply with this standard to meet airworthiness requirements. Participants will attain a basic understanding of the concepts of DO-178C and how it is properly utilized.

Training / Education

Tire and Wheel Safety Issues

One of the most important safety critical components on cars, trucks, and aircraft is the pneumatic tire. Vehicle tires primarily control stopping distances on wet and dry roads or runways and strongly influence over-steer/under-steer behavior in handling maneuvers of cars and trucks. The inflated tire-wheel assembly also acts as a pressure vessel that releases a large amount of energy when catastrophically deflated. The tire can also serve as a fulcrum, both directly and indirectly, in contributing to vehicle rollover. This course covers these facets of tire safety phenomena.

Training / Education

Guidance for Model-Based Development and Verification (DO-331)

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Model-Based Development and Verification (MBDV) technology has been widely accepted in software production. When this technology is used in airborne software, key issues should be considered to ensure airworthiness and safety goals are met. To facilitate the use the MBDV technology, RTCA DO-331 is published as a supplement and guidance support to DO-178C. Because MBDV is regularly used in critical software applications, guidance is needed to apply it to airborne software.

Training / Education

Theories and Methods of Future HMI Design for Automobiles

This course is offered in China only and presented in Mandarin Chinese. HMI design is an Interdisciplinary, which is based on human cognitive psychology and combines humanities, sociology, aesthetics, information science and other disciplines. While automotive technologies can be applied regardless of regions, HMI must be localized, as it is closely related to regional culture, people's living habits and characteristics. At the same time, HMI design has its own complete theoretical system, research and design methods and testing methods, instead of relying on experience.

Training / Education

DO-178C Practical Training

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). RTCA DO-178C  is the globally-accepted standard for civil aviation software development and certification. Compliance with the objectives of DO-178C is the primary means for meeting airworthiness requirements and obtaining approval of airborne software in TC/STC/TSO, etc. Even after study of the DO-178C, many people lack experience producing DO-178C compliant airborne software in real applications.

Training / Education

Model-Based Systems Engineering (MBSE)

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). As the complexity of products increases, traditional text-based systems engineering can no longer meet the needs. To solve the problem, Model-based Systems Engineering offers a unified communication platform among relevant staff by carrying out diagram-based unambiguous description, analysis and design for the demand, and structure and behavior of complex systems in the form of a model.

Training / Education

FAA/EASA Certification, Methods of Compliance for 29.801 Ditching

Certifying an aircraft, part or appliance can be a challenge.  The FAA/EASA procedures can be frustrating and a maze of rules, policy and guidance. Understanding the process and procedures can provide you with a competitive edge and reduce your time obtaining a Certification approval. This course provides an overview of the Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. This course has a focus on 29.801 Ditching and EASA 29.802 Emergency Flotation.

Training / Education

FAA/EASA Certification, Methods of Compliance for 29.865 External Loads

Certifying an aircraft, part or appliance can be challenge. The FAA/EASA procedures can be frustrating and a maze of rules, policy and guidance. Understanding the process and procedures can provide you with a competitive edge and reduce your time obtaining a Certification approval. This course provides an overview of the Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. This course has a focus on 29.865 External loads to include hoists, belly-mounted external structure and cargo hook loads.

Training / Education

Testing Models the Right Way – From Requirements to Model Testing

This training class provides a comprehensive overview of the principles, processes, and objectives of model testing – from requirements to model tests. We offer step-by-step guidance from creating requirements-based test specifications, through testing TargetLink and/or Embedded Coder models, to automated test evaluation based on test assessments and back-to-back/regression tests. In particular, we will emphasize ISO 26262-compliant test management and explain the test process for MiL and SiL, as well as tracing requirements to test specifications and test assessments.