Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

Laser Detecting Systems Enhancing Survivability and Lethality on the Battlefield Designing With Plastics for Military Equipment Engine Air-Brakes Paving the Way to Quieter Aircraft Nett Warrior Enhancing Battlefield Connectivity and Communications XPONENTIAL 2018 - An AUVSI Experience Communications in Space: A Deep Subject First Air-Worthy Metal-Printed RF Filter Ready for Takeoff Validation of Automated Prediction of Blood Product Needs Algorithm Processing Continuous Non-Invasive Vital Signs Streams (ONPOINT4) Using a combination of non-invasive sensors, advanced algorithms, and instruments built for combat medics could reduce hemorrhaging and improve survival rates. Calculation of Weapon Platform Attitude and Cant Using Available Sensor Feedback Successful development of mobile weapon systems must incorporate operation on sloped terrain.

Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.

Why Volt? After 48 months' development, the 2011 Chevrolet Volt has enetered series production. The pioneering "E-REV" is as important to the mobility industry as it is to GM. Creating the heart of Volt GM's battery requirements meant creating new state-of-the-art in-vehicle engery storage - and doing it in less than four years. Top GM and supplier engineers reveal how they did it. Engineering with maniacal focus A dedicated, cohesive team and a conservative engineering approach put this innovative vehicle into production at moon-shot speed. A unique electrified transaxle Hybrid or not? Definitions aside, what really matters is GM wisely leveraged its next-generation Two Mode propulsion technology to give Volt greater overall efficiency. Sweating the body details Extensive wind-tunnel work gave Volt a shape that's slicker than it looks. But engineers aren't happy with the curb weight.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

Defending the heavy-vehicle cyber domain Cybersecurity experts explained at SAE COMVEC 2021 how they're preparing the next generation of thwarters to protect increasingly electrified, connected and automated trucks. Digitalization of product engineering ESI proposes "sustainable" product development via virtual prototyping to ensure operational safety and comfort for off-highway machines. Developing a next-gen VGT Engineers from Mitsubishi Heavy Industries refine the design of a variable geometry turbocharger for commercial vehicles. Editorial Insightful comments from COMVEC Lidar lets Vermeer automate baling processes Extending a Wankel future on hydrogen fuel Next-gen HMI crucial for ADAS efficacy Altair honors weight-saving innovations A bevy of battery and fuel-cell electric truck reveals Q&A Dr. Philip Stephenson, general manager of the PACCAR Technical Center, hones in on the potential efficacy of E-fuels, commercial-vehicle battery-swapping.

Are higher voltage architectures imminent? As the limitations of current 12V architectures become more apparent, the commercial vehicle industry could be on the verge of adopting 48V. The only question is, will improvements in other technologies offer something better? Sensing changes in autonomous trucks Requirements for sensors and controls for commercial vehicles differ significantly from those used for cars. Many paths lead to reduced emissions A wide range of ICE technologies are needed to meet increasingly stringent emissions regulations. Quotes from COMVEC 2018 Industry leaders spoke extensively about all things autonomous-ADAS, big data, connectivity, cybersecurity, machine learning-at the annual SAE event. Here's some of what they had to say. Fuel-cell Class 8-take 2.0 With a longer-range and more-refined fuel cell-powered heavy-duty truck, Toyota aims to eventually eliminate emissions from trucks serving increasingly congested California ports.

Executive Viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Alternative power and connectivity top of mind Using power dense flywheel hybrid technology to cut fuel consumption of OH equipment IoT connections transform manufacturing, vehicle validation Annual Product Guide Supplier Directory Complete listing of industry suppliers categorized by technology area.

Virtual powertrain development Simulation is critical for efficient product development, but proper tool selection and efficient data management are keys to success. Blue Arc amps up for EV production Shyft Group's EV subsidiary is lighting the path for the electrification of last-mile delivery vehicles as well as mobile charging solutions. Increasing connectivity in construction Jobsites look to overcome challenges posed by mixed fleets and proprietary telematics to achieve "one-dashboard" vision and increased machine utilization.

Steel sector aids sustainability Volvo Group partners with SSAB on 'green steel' for off-highway machines and with Ovako for access to fossil-free hydrogen. CV autonomy: Picking the 'low-hanging fruit' Increasingly automated commercial vehicles offer challenges and opportunities in simulation, data management and standardization. Developing EV-specific lubes As electric-vehicle technology accelerates, dedicated e-fluids are necessary to maintain proper levels of drivetrain performance. Editorial Real-world emphasis on electric Mahle, Liebherr develop active pre-chamber for hydrogen ICE ABS ramps up commercial-vehicle battery-pack assembly Navistar updates A26 engine, improves FE by 4% Bosch debuts new CV-specific electric motor and inverter Western Star adds 'weight sensitive' 47X to vocational lineup Hyundai CE launches next-gen electric forklift Q&A Mahle's Laurent Art discusses thermal-management challenges, solutions for battery and fuel-cell electric commercial vehicles.

Deere advances in-field autonomy While stereo cameras and computer vision guide Deere's "limited- release" 8R autonomous tractor, Bear Flag's lidar tech will augment future machines. Positioning to centimeter-level improves agriculture Precision-navigation approaches that emphasize backward compatibility help farms reap more value from autonomous operations. Funding, mandates fuel commercial-vehicle electrification Legislators provide the impetus to electrify trucks and buses, leading to several engineering challenges.

Accelerating truck autonomy Platform-agnostic interfaces, field data analytics and smart diagnostics will help the commercial-vehicle industry reach SAE Level 4 and 5 operations sooner. Upswing in outsourced EV testing As testing for electric commercial-vehicle propulsion systems surges, Drive System Design is rushing to expand its testing capabilities in the U.S. to keep up with the demand. Global emissions regs demand differing engine strategies The best choice in emissions-reducing technology varies for the U.S. versus Europe and elsewhere, a Jacobs expert details. Precision ag aids sustainability Deere expert Deanna Kovar, a 2021 SAE COMVEC keynoter, provides her thoughts on the future of autonomy, computer vision and machine learning, data management and more.

Connectivity takes center stage Telematic links have become the norm, helping fleet owners and operators improve efficiency and letting OEMs predict component failures. More power, less noise, fewer emissions These key attributes drive development of new generators both big and small. TARDEC pursues advanced power generation U.S. Army, GM collaborate on fuel-cell-generated electricity to power the vehicle's propulsion system and onboard electronics, while providing off-vehicle power via an Exportable Power Take-Off unit. Developing an alternative engine concept Ricardo's CryoPower engine leverages two unique combustion techniques for reduced emissions and fuel consumption-liquid nitrogen and split combustion. Long-haul trucking and stationary power generation will be the first beneficiaries of the technologies. Technology time-warp The road to autonomous driving has been under construction for decades, as showcased by SAE's Mobility History Committee at the 2018 WCX in Detroit.

Rotary SI/CI combustion engines: A thing of the future? The internal combustion engine enjoys widespread use as an inexpensive and reliable power conversion system. While piston engines date back 150 years, various alternative engine architectures and cycles have been considered. Aftertreatment comes with challenging diagnosis Diagnosing engine and aftertreatment systems is forcing design teams to look at new ways to diagnose problems over long vehicle lifetimes. Taking on NVH reduction techniques A look at the enhanced durability benefits obtained by changing the polymer composition, manufacturing methods, and design optimization of a powertrain mount for an off-highway vehicle.

Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.

Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.

The evolution of engineering via computer CAD has come a long way since the 1970s and '80s. Now with a price tag less that 10% of a 1980 system, CAD and its add-ons can tackle an ever-increasing range of tasks inculding automated engineering.