Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Laser Detecting Systems Enhancing Survivability and Lethality on the Battlefield Designing With Plastics for Military Equipment Engine Air-Brakes Paving the Way to Quieter Aircraft Nett Warrior Enhancing Battlefield Connectivity and Communications XPONENTIAL 2018 - An AUVSI Experience Communications in Space: A Deep Subject First Air-Worthy Metal-Printed RF Filter Ready for Takeoff Validation of Automated Prediction of Blood Product Needs Algorithm Processing Continuous Non-Invasive Vital Signs Streams (ONPOINT4) Using a combination of non-invasive sensors, advanced algorithms, and instruments built for combat medics could reduce hemorrhaging and improve survival rates. Calculation of Weapon Platform Attitude and Cant Using Available Sensor Feedback Successful development of mobile weapon systems must incorporate operation on sloped terrain.

A new Formula for racing The new Formula E series' electric racecars are intended to pioneer new technology for broader use in production, encouraging fans to think differently about the technologies they use. Production of satellite with first all-electric propulsion system advances Electric propulsion has been limited so far to small movements of the satellites once it is in its geostationary orbit. The Boeing 702SP innovation is its use of electric propulsion to raise the satellite from its launch-vehicle drop-off point to geostationary orbit. Using CAE to assess whining noise of electric powertrains To develop an electric powertrain with a minimum noise level and minimized whining it is necessary to have accurate CAE simulation and precise criteria to assess whining noise.

Putting electrification to work For fleets, going green is a high priority-but making green is an even higher one. A move to 'more electric' engines Researchers detail a motor control design for the fuel system of a more electric aero engine, focusing on the necessary safety and reliability aspects. 2012-13 Hybrid Vehicles Guide A quick reference to the latest production HEVs and their key specifications.

Executive Viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Alternative power and connectivity top of mind Using power dense flywheel hybrid technology to cut fuel consumption of OH equipment IoT connections transform manufacturing, vehicle validation Annual Product Guide Supplier Directory Complete listing of industry suppliers categorized by technology area.

Big future for e-axles, advanced motors Top transmission engineers claim driveline electrification will transform everything from all-wheel drive to Class 8 tractor-trailers. Big data's benefits keep a-comin' Gigabytes of data are being collected and increasingly mined to improve field operations, maintenance and even vehicle design. Transformative times Despite a challenging climate, technology development progresses - as does the sharing of innovative ideas - virtually. Editorial Zeroing in on zero emissions Softing envisions secure, reliable predictive maintenance Reconstructing accidents in the ADAS age Paving the way to improved truck fuel efficiency Nikola looks to accelerate production, hydrogen infrastructure Mecalac designs unique-pivoting swing loader Q&A' Horiba's Joshua Israel discusses complex regulatory landscape's impact on commercial-vehicle development and shift to electrification.

Connectivity takes center stage Telematic links have become the norm, helping fleet owners and operators improve efficiency and letting OEMs predict component failures. More power, less noise, fewer emissions These key attributes drive development of new generators both big and small. TARDEC pursues advanced power generation U.S. Army, GM collaborate on fuel-cell-generated electricity to power the vehicle's propulsion system and onboard electronics, while providing off-vehicle power via an Exportable Power Take-Off unit. Developing an alternative engine concept Ricardo's CryoPower engine leverages two unique combustion techniques for reduced emissions and fuel consumption-liquid nitrogen and split combustion. Long-haul trucking and stationary power generation will be the first beneficiaries of the technologies. Technology time-warp The road to autonomous driving has been under construction for decades, as showcased by SAE's Mobility History Committee at the 2018 WCX in Detroit.

QT steels make an impact The use of quenchd and tempered steels for dumper bodies reduces weight and fuel consumption while increasing payload capacity and wear life.

What's New at ConExpo/IFPE More new products and technologies that companies plan to showcase at this year's ConExpo-Con/Agg, which is co-located with the IFPE fluid-power event in Las Vegas from March 4-8, are previewed. Gearshift actuator dynamics in a dual clutch transmission The emergence of tougher environmental and fuel efficient legislations have triggered exploration and advance toward new and better vehicle transmission technologies. Software makes solid impact Programs are helping hydraulic systems do more while reducing operator workloads. Damping out booming noise NVH improvement techniques are gaining traction with the goal to improve the quality perception of off-highway equipment performance and operator comfort.

Rotary SI/CI combustion engines: A thing of the future? The internal combustion engine enjoys widespread use as an inexpensive and reliable power conversion system. While piston engines date back 150 years, various alternative engine architectures and cycles have been considered. Aftertreatment comes with challenging diagnosis Diagnosing engine and aftertreatment systems is forcing design teams to look at new ways to diagnose problems over long vehicle lifetimes. Taking on NVH reduction techniques A look at the enhanced durability benefits obtained by changing the polymer composition, manufacturing methods, and design optimization of a powertrain mount for an off-highway vehicle.

Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs

Hybrids step forward Electric and hydraulic systems trim fuel consumption and emissions, boost performance. Braking for safety Researchers developed a simplified ABS/EBS ECU test bench to research the brake force control function of the EBS system using HIL simulation technology. A metered look at dosing pumps High delivery accuracy, low weight, and dependably long life have made solenoid-operated pumps widely used in mobile applications.

Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.

Heavy-duty engine blender Researchers at Southwest Research Institute and Navistar exploring the feasibility of micro-pilot diesel-injection dual-fuel combustion at key part load conditions found it offers ultra-low smoke and NOx emissions while maintaining diesel-comparable fuel consumption and noise levels.

Quiet in the cab As NVH gains importance in the quality of off-highway machines' performance and operator comfort, it is essential to understand every aspect of the machine noises and its annoyance effect to the operator's comfort.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Hydraulic architecture strategies Researchers compare two different rule-based power-management strategies, in terms of their resultant fuel consumptions, through a simulation study as applied to a hybrid hydraulic multi-actuator displacement controlled system.

Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.